What are the new regulations for upgrading from a C1 to a B2 driver's license?

1 Answers
McKennedy
07/30/25 12:47am
It's not complicated. The conditions for upgrading from a C1 to a B2 license are as follows: Hold a C1 driver's license for small cars for at least 3 years, with no full demerit point records in the last three consecutive scoring cycles, aged between 20 and 50 years old, no record of causing a fatal traffic accident with equal or greater responsibility, no record of drunk driving, and no revocation or cancellation of the driver's license within the last ten years. C1 is a code for a type of driver's license. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), C1 refers to a license that permits driving small and micro passenger vehicles, light and micro cargo vehicles, as well as light and micro special-purpose vehicles. It also allows driving vehicles under the C2, C3, and C4 categories. A B2 license permits driving heavy and medium-duty trucks or large, heavy, and medium special-purpose vehicles. Heavy and medium-duty trucks are mainly trucks, such as the large dump trucks commonly seen on roads, which fall under the category of heavy trucks. Large, heavy, and medium special-purpose vehicles refer to vehicles equipped with specialized equipment or tools, such as water sprinklers, concrete mixers, fire trucks, etc. Article 14 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" states that for first-time applicants of a motor vehicle driver's license, the permitted vehicle types include city buses, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, small automatic transmission cars for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. For those who already hold a motor vehicle driver's license and wish to add additional permitted vehicle types, the additional types include large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Article 15 states that for those who already hold a motor vehicle driver's license and wish to add additional permitted vehicle types, they must not have a record of accumulating 12 demerit points in the current scoring cycle and the most recent scoring cycle before the application. For applications to add medium-sized passenger vehicles, tractors, or large passenger vehicles, the following additional conditions must be met: For adding medium-sized passenger vehicles, the applicant must have held a license for city buses, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, or three-wheeled cars for at least three years, with no record of accumulating 12 demerit points in the last three consecutive scoring cycles before the application. For adding tractors, the applicant must have held a license for medium-sized passenger vehicles or large trucks for at least three years, or a license for large passenger vehicles for at least one year, with no record of accumulating 12 demerit points in the last three consecutive scoring cycles before the application. For adding large passenger vehicles, the applicant must have held a license for city buses, medium-sized passenger vehicles, or large trucks for at least five years, or a license for tractors for at least two years, with no record of accumulating 12 demerit points in the last five consecutive scoring cycles before the application. Full-time students receiving driving vocational education who have obtained a license for small cars while in school and have no record of accumulating 12 demerit points in the current scoring cycle and the most recent scoring cycle before the application may apply to add large passenger vehicles or tractors.
Was this review help?
13
1
Share
More Forum Discussions

How to Check the Vehicle Identification Number (VIN)?

Vehicle Identification Number (VIN) query process is as follows: 1. Search for the local traffic website URL and click to enter. 2. After opening the page, you need to register as a user. This registration is completely safe as it's free. If any registration requires payment, it's false information. After successful registration, you'll be automatically redirected to the "Member Center". 3. On the page, click "VIN Query" to open the search interface. In China, most vehicle VINs can be found on the left side of the dashboard and below the windshield. Additionally, the new vehicle license clearly prints the VIN in the "VIN" column. Therefore, when querying the vehicle identification code on the website, you can get results by entering the last four digits.
8
4
Share

What are the features of remote engine start?

Remote engine start has the following features: 1. High reliability: Since the remote engine start is structurally identical to manual ignition inside the vehicle, both use an electric motor to start the engine, there is no issue of mechanical wear on the heater, significantly reducing the likelihood of failure. 2. Convenience: Although remote engine start cannot be scheduled like parking heaters, the remote start method is still very convenient. The remote range is typically no less than 50 meters, allowing the engine to be started in advance from home or the office if the vehicle is parked in a ground-level parking lot. 3. Automatic timing: Usually, if no operation is performed after a certain period following a remote start, the engine will automatically shut off to avoid potential fuel wastage from forgetting to turn it off. 4. Whole-vehicle heating: This function, like parking heaters, heats up the coolant in the radiator, effectively warming up the cabin, engine, and windows.
11
4
Share

What Does the Break-in Period for a New Car Mean?

The concept of the break-in period for new cars originated from early limitations in automotive manufacturing processes, where vehicles did not achieve optimal performance right after production. A break-in period was necessary to allow various components to achieve their best working compatibility. Below are specific details about the break-in period: 1. With advancements in the automotive industry, manufacturing processes have significantly improved. Modern break-in periods differ from those in the past, as cars now undergo cold break-in treatments before leaving the factory. 2. During the initial usage of a new car, owners should keep the following key points in mind: (1) Avoid sudden acceleration, hard braking, overloading, and when going downhill, control the speed appropriately without abruptly using engine braking. (2) For manual transmission vehicles, anticipate gear shifts appropriately and avoid shifting at improper speeds. For automatic transmission vehicles, refrain from coasting in neutral or prolonged use of the S (Sport) mode. (3) Regularly check tire pressure, coolant level, brake fluid level, and engine oil level. (4) Regarding speed, do not exceed two-thirds of the vehicle's maximum speed, and keep engine RPM below 3000-3500 (requirements may vary among manufacturers). (5) After the break-in period ends, timely maintenance is essential. Typically, the completion of the first maintenance service signifies the end of the break-in period.
11
1
Share

What are the differences between imported Audi A6 and domestically produced Audi A6?

The imported version of the Audi A6 is a station wagon, equipped with three types of engines: a 1.8T engine, a 2.0T engine, and a 3.0-liter supercharged engine. The domestically produced version of the Audi A6 is an extended sedan, also equipped with three types of engines: a low-power 2.0T engine, a high-power 2.0T engine, and a 3.0T engine. Below are the relevant details: 1. The low-power 2.0T engine in the domestically produced A6 has a maximum power of 140 kW, a maximum torque of 320 Nm, a maximum power speed range of 4200 to 6000 rpm, and a maximum torque speed range of 1450 to 4200 rpm. This engine features hybrid injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. 2. The high-power 2.0T engine has a maximum power of 165 kW, a maximum torque of 350 Nm, a maximum power speed range of 5000 to 6000 rpm, and a maximum torque speed range of 1600 to 4500 rpm. This engine also features hybrid injection technology and uses an aluminum alloy cylinder head.
9
1
Share

How to Measure the 4 Wires of an Idle Motor?

The measurement method for the idle motor involves using the resistance range of a multimeter to measure the resistance values of the four pins separately. Below is an introduction to the idle motor: 1. The idle motor is a component that controls the idle speed of a motor vehicle. When the engine runs without load, it is referred to as idling. The idle motor is primarily used to manage the vehicle's idle speed, aiming to adjust the idle based on the engine load during idling. The idle stepper motor is mounted on the throttle body and is controlled by the engine control unit to regulate the engine's idle speed. When the engine speed deviates from the idle speed, it is adjusted by the throttle valve, which controls the amount of air entering the intake manifold and is mechanically operated by the accelerator pedal cable. 2. The throttle body features a bypass air passage that supplies air during engine idling (when the throttle valve is closed). The pivot of the automatic idle motor extends into the bypass air passage, regulating the airflow through it. The engine control unit, based on input signals from various sensors, adjusts the engine's idle speed by moving the pivot of the automatic idle motor in and out of the bypass air passage. The automatic idle motor begins operation when the ignition key is turned to the 'on' position.
20
4
Share

What is the emission standard for a 2009 car?

2009 cars are either China III or China IV emission standard. Cars produced between July 2007 and September 2009 are generally China III standard, while those after September 2009 are mostly China IV standard. Here are methods to check your vehicle's emission standard: 1. Check the back of the vehicle's environmental protection compliance label - the emission standard is clearly marked there. 2. Look at the first page of the vehicle qualification certificate. While it doesn't directly state "China III/IV", the emission standard is indicated through a series of characters. 3. You can roughly estimate the emission standard based on the vehicle's production year. 4. Take the vehicle registration certificate to your local vehicle management office for verification. Both the original and photocopy are acceptable for this query.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.