What are the new regulations for the annual review of a Class B driver's license?

Why are the inner lanes lower than the outer lanes on curved roads?

The outer lanes are higher than the inner lanes on curves to ensure that the combined force of the support force and gravity acts as part of the centripetal force, thereby enhancing traffic safety. When a car turns, it requires centripetal force. If the turn is sharp, this force needs to be greater. Relying solely on ground friction is insufficient to facilitate a smooth turn, so the outer side of the road is built higher while the inner side is lower. This design ensures that when a car passes through, the inclined surface of the road directs the resultant force toward the inner side of the curve, acting as the car's centripetal force and aiding in a smooth turn. When turning on wet, snowy, or muddy roads, drivers should reduce speed in advance by utilizing the engine's drag resistance and proceed slowly. Avoid sudden steering or hard braking. When turning uphill, if other vehicles are stuck due to slipping and blocking the curve, the driver should pull over to the right and wait for the vehicles ahead to pass before proceeding. When encountering slippery downhill turns, take precautions to prevent the car from sliding and causing collisions.

19

3

Share

Do You Need to Press the Accelerator When Starting a Car?

Manual transmission cars require pressing the accelerator when starting, while automatic transmission cars do not. Steps for starting a manual transmission car: Shift into 1st gear, turn on the turn signal, slowly lift the clutch pedal with your left foot to the semi-engaged state, while slowly releasing the parking brake lever with your right hand, and gradually pressing the accelerator pedal with your right foot. When the car reaches the semi-engaged state with slight shaking, release the clutch, and the car will move forward slowly, indicating a successful start. Steps for starting an automatic transmission car: Press the brake, then press the start button to ignite and start the engine, and release the foot brake to warm up the car while stationary. Press the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly). Check the road conditions clearly through the rearview mirror to ensure it is safe to start, while honking the horn and turning on the turn signal to alert other vehicles and pedestrians. Slowly release the foot brake to start, quickly merge into the road after starting, and drive at the designated speed. Then, based on road conditions, smoothly press the accelerator to speed up and drive safely.

8

5

Share

What Are the Reasons for Not Buying Stock Cars?

The reason for not buying stock cars is that after prolonged parking, stock cars can develop a series of issues. First, long-term parking without periodic inspections and maintenance can lead to aging and erosion. Moreover, in China, most stock cars lack proper warehouse management and are stored directly outdoors. After prolonged exposure to sun and rain, the aging of electronic components and rubber products is inevitable, and in severe cases, issues like lack of oil or power may arise. In the automotive sales industry, vehicles that have been in stock for more than three months or half a year are generally considered stock cars. Due to factors like transportation cycles, the stock time for imported cars may be slightly longer, but if it exceeds one year, they can also be termed as stock cars. The simplest and most effective method to determine whether a car is a stock car is to check the vehicle's nameplate, located on the passenger side or in the engine compartment. Additionally, you can examine tire imprints, brake disc rust spots, and the production date of the windshield to determine if the car is a stock car.

11

1

Share

Why can't the Corolla play music after Bluetooth connection?

There are several reasons why the Corolla's Bluetooth is connected but cannot play music: the volume on the car navigation system or phone is not turned on, the music playback program on the phone is incompatible with the car model's pairing code, the multimedia music feature of the car Bluetooth is not enabled, or there is a hardware malfunction. Volume on the car navigation system or phone is not turned on: You can go to your phone's settings, find the "Media" option under "Sound," and increase the "Media" volume. The same applies to the car navigation system—operate on the car display screen and increase the "Media" volume. Music playback program on the phone is incompatible with the car model's pairing code: It is recommended to change the Bluetooth playback frequency band to enable normal Bluetooth music playback. Multimedia music feature of the car Bluetooth is not enabled: You can find the multimedia option on the screen, enter the interface, and select the Bluetooth music playback option. Hardware malfunction: In this case, you can only seek help from the relevant equipment seller.

20

0

Share

What Are the Reasons for the Corolla Fan Blower Not Working?

Reasons for the Corolla fan blower not working include the coolant temperature not reaching the required level, relay failure, or issues with the temperature control switch. Coolant Temperature Not Reaching the Required Level: Most modern car radiator fans operate based on electronic temperature control, meaning the fan will only start working when the coolant reaches the specified temperature. If the temperature is too low, the radiator fan will not rotate. Therefore, if the car radiator fan fails to operate, the first step is to check whether the coolant temperature meets the required level. If the temperature remains too low, the engine should be inspected. Relay Failure: If the coolant temperature is adequate but the car radiator fan still does not work, the issue may lie with the fan relay. In this case, the relay should be removed for inspection and repaired or replaced if necessary. Temperature Control Switch Issues: If neither of the above issues is present, the temperature control switch should be checked, as a faulty switch can also affect the operation of the car radiator fan. The solution is to replace the temperature control switch.

9

1

Share

What is the license plate for Chuan Y?

Chuan Y is the license plate for Bazhong City, Sichuan Province. The license plate codes for various regions in Sichuan Province are as follows: Chuan A for Chengdu City, Chuan B for Mianyang City, Chuan C for Zigong City, Chuan D for Panzhihua City, Chuan E for Luzhou City, Chuan F for Deyang City, Chuan H for Guangyuan City, Chuan J for Suining City, Chuan K for Neijiang City, Chuan L for Leshan City, Chuan M for Ziyang City, Chuan Q for Yibin City, Chuan R for Nanchong City, Chuan S for Dazhou City, Chuan T for Ya'an City, Chuan U for Aba Tibetan and Qiang Autonomous Prefecture, Chuan V for Ganzi Tibetan Autonomous Prefecture, Chuan W for Liangshan Yi Autonomous Prefecture, Chuan X for Guang'an City, Chuan Y for Bazhong City, and Chuan Z for Meishan City. A license plate number is an identifier for a vehicle, much like an ID number is to a person.

11

0

Share

What are the new regulations for the annual review of a Class B driver's license?

Why are the inner lanes lower than the outer lanes on curved roads?

Do You Need to Press the Accelerator When Starting a Car?

What Are the Reasons for Not Buying Stock Cars?

Why can't the Corolla play music after Bluetooth connection?

What Are the Reasons for the Corolla Fan Blower Not Working?

What is the license plate for Chuan Y?

What Causes a Strong Jerking Sensation When Shifting Gears?

Where is the Roewe 750 cabin air filter located?

Where is the high beam fuse located in the Hyundai Elantra Langdong?

What is a Koenigsegg car?