What are the new regulations for the annual inspection of three-wheeled motorcycles?

1 Answers
Chad
07/29/25 4:16pm
Here is an introduction to the new regulations for the annual inspection of three-wheeled motorcycles: 1. Cross-regional inspection policy: Motorcycle inspections are now conducted nationwide, further allowing motorcycles to undergo inspections across provinces (autonomous regions, and municipalities). Additionally, motorcycles registered within 6 years will be exempt from inspection at inspection agencies to reduce the burden on the public, especially vehicle owners in rural areas. 2. Handling violations before the annual inspection: Vehicle owners can apply for an inspection compliance mark at the vehicle management office of the registration location up to three months before the expiration of the vehicle's inspection validity period. Before applying, the vehicle owner must resolve all traffic violations and accidents related to the vehicle.
Was this review help?
13
3
Share
More Forum Discussions

How to Clean Dirty Aluminum Alloy Wheels?

Here are the cleaning methods for dirty aluminum alloy wheels: 1. Use professional wheel cleaners, such as wheel cleaners or iron remover, which have no pungent smell during use and have obvious cleaning effects. Brake dust and rust stains can be removed, and the action time is short, making it easy to operate. For wheel maintenance and cleaning, if there is not much dirt on the wheels, you can first use water and a sponge brush to clean and rinse. 2. You can use common household oil stain cleaning products for cleaning. It is recommended to wear disposable gloves first, then rinse the wheels, spray the cleaner on the dirty area, wait for half a minute to let it take full effect. There may be a slight pungent smell during use, and then clean it with a water gun. The final cleaning effect is obvious, and both brake dust and rust can be removed.
10
5
Share

How to Turn Off an Automatic Car with Push-Button Start?

The method to turn off an automatic car with push-button start is as follows: First, stop the car and press the brake, shift the gear from D (Drive) to N (Neutral), engage the parking brake, then shift the gear from N to P (Park), release the foot brake, and finally press the push-button start to turn off the engine. Below is more information about push-button start: 1. The push-button start is part of a smart car's system, a button device that simplifies the starting process and can also be used to turn off the engine. This device can be installed in place of the original key slot or as an independent panel. 2. The smart key also includes a key with notches or grooves, which serves as a backup for starting the car manually in case the push-button start function fails.
7
1
Share

What are the reasons for a car door suddenly not opening?

There are several reasons why a car door may suddenly not open: 1. Child lock is activated: Most rear doors of vehicles have a child lock, indicated by a child symbol on the side of the door. If activated and the door is closed, the door will not open. 2. Door lock cable failure: A malfunctioning cable directly affects the lock mechanism, preventing the door from opening. Replacing the door lock cable is necessary to resolve this issue. 3. Door hinge or lock post deformation: External force applied to the door can cause the hinge or lock post to deform, which is another reason the door may not open. 4. Door limiter failure: A faulty door limiter can also prevent the door from opening. The solution is to replace the door limiter with a new one.
8
1
Share

How Often Should Engine Valve Seals Be Replaced?

Engine valve seals do not have a fixed replacement interval, but it is recommended to replace them every 20,000 to 30,000 kilometers. Below is relevant information about engine valve seals: Function of engine valve seals: They prevent engine oil from entering the intake and exhaust pipes, avoiding oil loss. They also prevent the leakage of the air-fuel mixture and exhaust gases, and stop engine oil from entering the combustion chamber. Symptoms of damaged engine valve seals: If the valve seals are damaged, the vehicle may start burning oil, emitting blue smoke during cold starts. Additionally, the engine may exhibit symptoms such as poor acceleration and vibrations. In such cases, the valve seals need to be replaced, although there is no specific mileage requirement for replacement.
2
0
Share

What are the brands of hybrid electric vehicles?

Common hybrid electric vehicle brands include: Corolla Hybrid, Changan CS55, Ruifeng M4, Borui GE, BMW X6 Hybrid, Escalade Hybrid, Lexus RX450h, Hybrid Touareg, Mercedes-Benz ML450 BlueHYBRID, and more. Below is more information about hybrid vehicles: 1. The power system of a hybrid electric vehicle mainly consists of a control system, drive system, auxiliary power system, and battery pack. 2. At the beginning of the vehicle's operation, the battery is fully charged, and its energy output can meet the vehicle's requirements, so the auxiliary power system does not need to work. When the battery level drops below 60%, the auxiliary power system starts. When the vehicle's energy demand is high, both the auxiliary power system and the battery pack provide energy to the drive system.
13
5
Share

What are the reasons for car door windows not being able to roll up or down?

Car door windows not being able to roll up or down is due to damage to the window regulator or related components. Here is relevant information about window regulators: Three scenarios of car door windows not being able to roll up or down: First scenario: Operating the window regulator switch results in no movement of the window regulator. Second scenario: Operating the window regulator switch elicits a response from the regulator, but the window cannot roll up or down. Third scenario: Operating the window regulator switch causes the regulator to move, but the window stops halfway or automatically descends back to its original position. Solutions for car door windows not being able to roll up or down: Check if the window regulator switch is damaged or if there is a power circuit break. If the issue is confirmed to be with the regulator itself, replacing the regulator can solve the problem. If the regulator motor is overloaded and lacks sufficient power, replacing the regulator motor or the entire assembly can resolve the issue.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.