What are the new regulations for motor vehicle annual inspections within six years in 2021?

2 Answers
DiIsabela
07/29/25 3:20pm
Introduction to the new vehicle inspection regulations: In 2021, for non-operational small and micro passenger vehicles (excluding minivans) that are over 6 years but under 10 years old, the inspection frequency has been adjusted from once a year to once every two years. At the 6th and 8th year, the vehicle must undergo an on-site inspection. For private vehicles over 10 years old, the original inspection cycle remains unchanged, i.e., once a year for vehicles between 10 and 15 years old, and once every six months for vehicles over 15 years old. Below are the relevant regulations: 1. Article 49 of the "Motor Vehicle Registration Regulations" states that the owner of a motor vehicle may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle's inspection validity period. 2. Before applying, the owner must resolve all traffic violations and accidents related to the vehicle. When applying, the owner must fill out an application form and submit the vehicle's license.
Was this review help?
5
2
Share
DeRonan
08/14/25 8:07am
As a long-time driver, the 2021 new vehicle inspection regulations were a godsend for me. In short, for the first six years after buying a new car, you no longer have to endure the hassle of queuing up at the inspection station every year. Instead, you can simply apply for an inspection decal every two years via the Traffic Management 12123 app on your phone. Last year, when my car reached its second year, I used this method—just uploaded the insurance policy and vehicle information. The process was simple, quick, and saved me a lot of time and effort. This policy applies only to small non-commercial passenger vehicles, such as regular sedans or SUVs. As long as your car hasn’t been in any accidents or undergone structural modifications, it likely qualifies. However, I should remind you that if you’ve had minor scratches or made any modifications, you might still need to go through the traditional inspection process. Overall, this policy reduces hassle and makes driving life easier, but I still advise car owners not to get too complacent. Regularly check your brakes and tire wear—safety should always come first. Keeping your car in good condition ensures it lasts longer.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

What is the fuel consumption of the RS7?

RS7 owner average fuel consumption: average fuel consumption of 17.8 liters per 100 kilometers, official fuel consumption: 10.3 liters. Here is additional information: Engine: The Audi RS7 is a mid-to-large-sized imported luxury car, originally equipped with a 4.0T V8 turbocharged engine, providing ample power. Design style: The Audi RS7 concept car was designed by a designer from Austria, and the car's exterior design incorporates the styles of several Audi models. The side body and rear design are very similar to the Audi R8, while the car doors adopt Lamborghini's classic scissor door design.
4
1
Share

How to Tighten Motorcycle Mirrors?

First, take a wrench and loosen the screws on the mirror to make them slack. Hold the mirror with your hand and rotate it counterclockwise until the mirror comes off. Place the removed mirror on the ground to inspect the extent of damage. Adjust the mirror angle and use the wrench to tighten the screws on the mirror.
8
2
Share

How to Reset the Maintenance Reminder for the 2020 Magotan?

First, turn the ignition key of the Volkswagen Magotan to the ON position to illuminate the car's dashboard. Then, press the down button on the steering wheel to locate and select the maintenance option. After entering the maintenance interface, a selection screen will appear; choose the reset option. Finally, the vehicle's maintenance reminder will be canceled.
14
1
Share

What is the correct method for B2 pressing the pancakes?

Use the raised left ridge inside the car hood to align with the direction of the front 1st and 2nd pancakes. When the car is about to pass the 4th pancake, center the steering wheel. Once the car is about to pass the 5th pancake, straighten the steering wheel.
8
1
Share

How to Adjust the Angle of the Wiper Linkage Rod?

First, turn the key to the ON position, activate the wipers, then turn off the switch and the key. At the base of the wiper arm, remove the dust cover, use an appropriate wrench or socket to loosen the screw until it can be rotated. Then lift the wiper blade and gently shake it. Once it becomes loose, position the wiper blade to the desired angle, tighten the screw, and replace the dust cover.
15
2
Share

Difference Between TPR Wheels and Rubber Wheels?

TPR tires are tire products that do not require high wear resistance or strength, whereas rubber tires used in vehicles demand high load-bearing capacity, wear resistance, and mechanical strength. Here is additional information: TPR tires: Primarily used for casters, cart wheels, and toy tires where load-bearing capacity and wear resistance strength requirements are not very high. They are typically made of pure TPR material or a composite of TPR with other materials like PP or ABS through injection molding. Rubber tires: Usually vulcanized rubber tires, used for various vehicle tires. Due to the high demands on load-bearing capacity, wear resistance, and mechanical strength, the material requirements for these tires are stringent. Besides vulcanization, materials like steel wires and nylon fabric are incorporated into rubber tire products to enhance impact resistance and anti-burst performance.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.