What are the new regulations for annual vehicle inspection of passenger cars in 2020?

2 Answers
FinleyFitz
08/28/25 2:54am
The new regulations for annual vehicle inspection of passenger cars are as follows: 1. Regulation content: According to the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China', motor vehicles shall undergo safety technical inspections according to the following periods from the date of registration: Passenger vehicles for operational use shall be inspected once a year within 5 years; beyond 5 years, once every 6 months; Trucks and large and medium-sized non-operational passenger vehicles shall be inspected once a year within 10 years; beyond 10 years, once every 6 months. 2. Other content: Small and micro non-operational passenger vehicles shall be inspected once every 2 years within 6 years; beyond 6 years, once a year; beyond 15 years, once every 6 months; Motorcycles shall be inspected once every 2 years within 4 years; beyond 4 years, once a year; Tractors and other motor vehicles shall be inspected once a year.
Was this review help?
19
2
Share
StHeidi
09/09/25 8:17am
I remember the biggest change in the 2020 annual inspection regulations for passenger cars was the expansion of the exemption scope. Previously, only vehicles with fewer than 6 seats could enjoy a 6-year exemption from on-site inspections, but now it has been extended to non-operational small and mini passenger vehicles with fewer than 9 seats, which is great news for our family's MPV. Additionally, the vehicle inspection cycle has been adjusted. For vehicles aged 6 to 10 years, inspections are now only required in the 6th, 8th, and 10th years, eliminating the need for visits to the inspection station in the intervening years. However, older vehicles over 10 years still need annual inspections, and those over 15 years must undergo inspections every six months. Although new vehicles are exempt from on-site inspections for the first six years, remember to apply for the electronic inspection label on the Traffic Management 12123 platform every two years. These changes have indeed saved us car owners a lot of hassle, but those who modify headlights or body structures should be careful—failing the annual inspection means having to restore the original setup.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

What is the length of the Volkswagen Tiguan?

The length of the Volkswagen Tiguan is 4506mm, the width is 1809mm, and the height is 1685mm. Taking the 2020 Volkswagen Tiguan L as an example, it belongs to the mid-size SUV category with a wheelbase of 2791mm, a fuel tank capacity of 60 liters, and a curb weight of 1625kg. The 2020 Volkswagen Tiguan L features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 186PS, a maximum power of 137kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
6
2
Share

What are the methods to deal with a car pulling to the right?

The methods to deal with a car pulling to the right are: 1. Check and adjust using a four-wheel alignment instrument; 2. Use a tire pressure gauge to check the tire pressure on both sides and inflate them to the same level; 3. Inspect the tread wear condition on both sides of the tires; 4. Use a four-wheel alignment instrument to check the wheelbase on both sides. If the wheelbase difference is too large, use a body correction instrument to restore the deformation. Reasons for a car pulling to one side while driving: 1. Uneven tire pressure on both sides; 2. Uneven tread wear on both sides of the tires; 3. Poor retraction of the brake caliper piston on one side of the vehicle; 4. Inconsistent preload of the wheel hub bearings on both sides; 5. Uneven wheelbase on both sides of the tires.
1
5
Share

How to Disassemble the Verano Key?

To disassemble the Verano car key, follow these steps: 1. At the small groove of the hook, use a flat-head screwdriver to gently pry the back side. 2. You will notice a gap appearing, then slowly widen this gap. To replace the car key battery, proceed as follows: 1. Remove the key ring, place a 1-yuan coin into a groove on the key, then twist the coin to open it and replace the CR1620 button battery. 2. Identify the positive and negative poles (positive down, negative up) and install the battery correctly. 3. Initialization: After replacing the key, initialize it to restore the remote control function.
3
5
Share

What engine does the Lynk & Co 05 have?

The Lynk & Co 05 is equipped with a 2.0L turbocharged 4-cylinder engine, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. Taking the 2020 Lynk & Co 05 as an example, it belongs to the compact SUV category, with body dimensions of 4592mm in length, 1879mm in width, and 1628mm in height, along with a wheelbase of 2734mm and a curb weight of 1738kg. The 2020 Lynk & Co 05 features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is powered by a 2.0L turbocharged engine delivering a maximum horsepower of 254ps, a maximum power of 187kW, and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.
8
1
Share

How to Align the Timing Chain on a Roewe 350?

To align the timing chain on a Roewe 350, follow these steps: 1. Locate the small hole blocked by a white plastic plug at the lower right corner of the engine transmission exhaust manifold. 2. Remove the plug and insert an L-shaped iron bar of the same size as the hole. 3. Insert the iron bar into the small hole on the flywheel. 4. Ensure the two round holes on the camshaft are vertically aligned upwards to lock the camshaft in place. Taking the 2015 Roewe 350 as an example, it is a compact car with body dimensions of 4521mm in length, 1788mm in width, 1492mm in height, a wheelbase of 2650mm, a fuel tank capacity of 55 liters, and a curb weight of 1290kg.
20
1
Share

What Type of Transmission Does the Buick Envision Have?

Buick Envision has two types of transmissions: the 1.5T model uses a dry 7-speed dual-clutch transmission, independently developed and produced by SAIC-GM, while the 2.0T model uses a conventional 9-speed automatic transmission. Below is some relevant information: 1. Dry Clutch: A clutch that uses air for cooling is called a dry clutch. In use, the clutch should engage and disengage smoothly and easily, and should not overheat even when operating under semi-engaged conditions for short periods. 2. Dry clutches, because they lack the resistance of oil, generally engage more quickly and with greater force. Also, since there is no oil for cooling, dry clutches are usually exposed to dissipate heat.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.