What are the new regulations for annual vehicle inspection?

1 Answers
LeilaDella
07/30/25 7:07am
Annual inspection new regulations cover a wide range of areas, the following sections provide details: Expanded exemption scope for private vehicles: On the basis of exempting non-operational mini and micro passenger vehicles with 6 or fewer seats from inspection within 6 years, non-operational mini and micro passenger vehicles with 7 to 9 seats within 6 years are now included in the exemption scope. For non-operational mini and micro passenger vehicles older than 6 years but less than 10 years, the inspection frequency is adjusted from once per year to once every two years. Electronic inspection labels: Starting from March 1, 2020, 16 cities including Beijing, Tianjin, Shanghai, Chongqing, Harbin, Nanjing, Hangzhou, Ningbo, Jinan, Zhuzhou, Shenzhen, Haikou, Chengdu, Guiyang, Yuxi, and Urumqi became the first batch of pilot cities for electronic motor vehicle inspection labels.
Was this review help?
4
0
Share
More Forum Discussions

How to Start and Stop an Automatic Transmission Car?

Starting and stopping methods for automatic transmission cars: 1. Correct starting procedure: Press the brake - Ignition - Shift to D gear (or R gear) - Release the handbrake - Release the foot brake - Press the accelerator - Start moving. 2. Correct stopping procedure: Press the brake - Engage the handbrake - Shift to P gear - Turn off the engine. 3. When stopping, you must wait until the vehicle comes to a complete stop before shifting to P gear, otherwise it may damage the transmission. Correct practices for starting and stopping on slopes: 1. On a slope, shifting directly to P gear can impact the transmission. The correct method is: Shift to N gear, engage the handbrake, press the brake, then shift to P gear. 2. For starting on a slope to prevent rolling back: Shift to D gear to start, then release the handbrake.
11
0
Share

How to Reactivate ETC After Removal and Reinstallation?

Method for reactivating ETC after removal and reinstallation: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On". If "Tag Invalid" appears when inserting/removing twice without the electronic tag attached, this is normal and doesn't affect activation. Alternatively, you can directly press the button on top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth and open the corresponding mobile APP (usually with a download QR code on the electronic tag), then enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. After successful connection, upload a photo of the vehicle's front to complete activation. ETC installation positions: For small vehicles like cars and minivans, the ETC card and OBU device should be installed on the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is on the lower middle part.
5
4
Share

How to reset the maintenance light on a 2019 Great Wall H6?

19 H6 maintenance light can be reset either manually or with an instrument. Manual reset requires turning off the key, pressing and holding the button at the lower right of the dashboard, then turning on the key until the originally flashing wrench symbol stops flashing, and then releasing the button. Instrument reset will display the (SERVICE) sign, prompting maintenance until the maintenance is completed, and then a zero reset can be performed. Here is some additional information: 1. Cars have a mileage recording function. This accessory records how many kilometers the car has run. When it reaches the mileage specified by the car company, the indicator light will remind the owner to perform maintenance or replace certain internal parts of the car. At the same time, this is also very convenient for car repair personnel, as they can judge the wear degree of internal parts based on the mileage. 2. If the car maintenance light is not reset to zero, it may delay the next replacement of car parts and affect the performance of the car. In addition, it will also cause trouble for the next replacement of parts, because the maintenance personnel cannot accurately know the usage time of the new accessories.
8
2
Share

Why Does Rolls-Royce Use Yellow License Plates?

Rolls-Royce vehicles use yellow license plates because some models exceed six meters in length, requiring them to bear yellow plates. According to vehicle registration regulations, cars with a body length under six meters and a total weight below 4,500 kg use blue license plates, while other models must use yellow plates. Here is additional information on license plate colors: 1. Not all Rolls-Royce models use yellow plates. For example, the Rolls-Royce Phantom, an extended-wheelbase model, measures 6,084*1,990*1,634 mm, while the standard version is 5,834*1,990*1,632 mm. Thus, the extended version exceeds six meters and requires a yellow plate, whereas the standard version uses a blue plate. 2. Apart from Rolls-Royce, another luxury sedan that uses yellow plates is the Maybach, which exceeds 6.2 meters in length. As per regulations, it cannot use blue plates, so the top-tier Maybach models also bear yellow plates.
4
2
Share

How to Check the Date of a Car Battery?

The production date of a car battery can usually be found on the top of the battery, indicated by numbers such as 26.08.16, which means it was produced on August 26, 2016. Interpreting the car battery code, using the model 6-QAW-54a as an example: 6 indicates that the battery consists of 6 single cells, each with 2V, resulting in a rated voltage of 12V. Q indicates the battery's purpose, where Q stands for automotive starting battery. M is for motorcycle batteries, JC for marine batteries, HK for aviation batteries, D for electric vehicle batteries, and F for valve-regulated batteries. A and W indicate the type of battery. A stands for dry-charged battery, W for maintenance-free battery. If not labeled, it indicates a standard battery. 54 indicates the battery's rated capacity is 54Ah. The subscript 'a' indicates the first improvement to the original product, 'b' the second improvement, and so on.
13
5
Share

What are the ABS system fault codes?

ABS fault meaning: An ABS fault indicates a malfunction in the vehicle's anti-lock braking system. When an ABS fault occurs, the ABS warning light illuminates. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, preventing the driver from slowing down or adjusting the vehicle's trajectory, which poses significant safety risks. It is recommended not to continue driving under such conditions; instead, the fault should be resolved before resuming operation. Driving with an illuminated ABS system fault is not advisable because an ABS system fault means the vehicle's anti-lock braking system is malfunctioning. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's path, which presents substantial safety hazards. Where is the ABS sensor located in the car? The ABS sensor is positioned on the inner side of the car's tires and can be seen when the vehicle is lifted. There are three types of ABS sensors: linear wheel speed sensors, ring-type wheel speed sensors, and Hall-effect wheel speed sensors.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.