What are the new regulations for annual inspection of family 7-seater vehicles?

1 Answers
DiPreston
07/30/25 7:46am
New regulations for vehicle annual inspection: Starting from November 20, 2020, non-operational small and mini passenger vehicles with 7-9 seats (excluding minivans) within 6 years are included in the exemption range; for non-operational small and mini passenger vehicles (excluding minivans) over 6 years but under 10 years, the inspection cycle is relaxed from once a year to once every two years, meaning private cars only need to undergo on-site inspections twice within 10 years, specifically in the 6th and 8th years. Content of the annual inspection: Check whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records; Test whether the vehicle's braking performance, steering control, lights, exhaust, and other safety performance meet the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles"; Check whether the vehicle has been modified, remodeled, or altered, whether the driving license, license plate, and all records in the vehicle file match the actual condition of the vehicle, whether there are any changes, and whether the approval and alteration procedures have been completed; Check whether the license plate, driving license, and the enlarged license plate characters printed on the vehicle are damaged, altered, or unclear, and whether they need to be replaced; Check whether large vehicles have the unit name or the name of the street, township, or town where the vehicle is located and the maximum seating capacity in the driver's cabin printed in imitation Song font on both sides of the door as required; Check whether the rear panel of trucks (including the rear panel of trailers) has the license plate number enlarged 2-3 times printed on the outside as required, and whether the sides of the doors of individual or joint-operation vehicles have the word "individual" printed on them; the characters must be clear, and unit codes or other patterns are not allowed (special cases require approval from the vehicle management office).
Was this review help?
13
2
Share
More Forum Discussions

Can Used Car Dealers Help with Temporary Residence Permit Applications?

Reliable used car dealers can assist with temporary residence permit applications. Here are some precautions when purchasing a used car: 1. Pay attention to the appearance: Some used cars have been involved in accidents. To increase the vehicle's value, dealers may refurbish and repaint it to make it look newer. Therefore, when buying a car, carefully inspect the exterior, check all corners and components for repainting, and look for signs of wear on the tires, headlights, and bumpers. 2. Check the chassis and frame: After an accident, even if the exterior is well repaired, the frame and chassis are difficult to restore. If you notice any deformation or bending, be cautious as the car might be a salvage vehicle.
5
5
Share

What is the car with the lowest drag coefficient?

Currently, the four cars with the lowest drag coefficients in the world are the Zhiji L7, Mercedes-Benz EQS, Model S Plaid, and Lucid Air, with drag coefficients ranging from 0.20 to 0.21Cd. Introduction to automotive drag: Automotive air resistance refers to the component of the force exerted by air on a car moving in a straight line, in the direction of travel. Air resistance is proportional to the square of the speed, meaning that if the speed doubles, the resistance increases by three times. Impact of high-speed driving: Therefore, high-speed driving has a very noticeable effect on air resistance. At high speeds, the engine must allocate a significant portion of its power, or fuel energy, to overcoming air resistance.
16
5
Share

Do dual-engine cars get blue or green license plates?

Dual-engine cars require blue license plates. Vehicles that do not require external charging need to use blue plates. Introduction to green license plates: Green license plates represent new energy vehicles, which are used to distinguish them from traditional fuel-powered vehicles. After all, some cities now implement traffic restriction policies, but new energy vehicles are exempt. This makes it easy to distinguish between new energy vehicles and fuel-powered vehicles at a glance based on their license plates. Green background with black characters: Small new energy vehicle license plates use gradient green as the background color, while large new energy vehicle license plates use a combination of yellow and green as the background color. The number of digits increases from the usual five to six.
5
0
Share

Tiguan L Air Filter Replacement Procedure

Tiguan L air filter replacement procedure is as follows: 1. Locate the fasteners, which are typically found under the glove compartment cover panel. 2. Gently remove the fasteners as plastic components are prone to breakage. After removal, the cover panel can be taken off. 3. The air filter is housed inside the filter box. Simply press the clips on the filter box cover to remove it. 4. The air filter can now be pulled out directly. Handle it gently to prevent dust dispersion. 5. The air filter can be reused if not excessively dirty. Cleaning it for reuse is acceptable. 6. During installation, ensure the text on the filter faces the driver. Reverse installation is not permitted.
12
0
Share

What is the general idle speed of a car?

Car idle speed varies between cold and warm engine conditions. When the engine is warm, the idle speed ranges from 550 to 800 RPM, while in cold conditions, it ranges from 950 to 1300 RPM. Once the engine temperature rises to a certain level, the idle speed will decrease to the normal range. Idle refers to the state when the engine is running without any load, which occurs when the accelerator pedal is fully released during engine operation. Idle speed is one of the engine operating conditions, so its performance significantly impacts emissions, fuel consumption, and comfort. The engine speed during idle is called idle speed, which should not be too high or too low. Excessively high idle speed increases fuel consumption, while excessively low idle speed causes unstable engine operation.
13
2
Share

How to Remove the Fuel Pump on a Beidou Star?

First, prepare the necessary tools for removing the fuel pump, then position the vehicle on a level indoor surface with the ignition switch in the OFF position; engage the parking brake. Use tools to slowly remove the rear inspection hole cover (gently pry it up without using excessive force, as there are wiring harnesses underneath). Disconnect the cable from the negative terminal of the battery, and remember to wrap the disconnected fuel pipe with plastic wrap to prevent dirt from entering. Also, note the original installation position. Clean the upper part and edges of the fuel pump assembly (there may be a lot of dirt, which can be wiped clean with a cloth). Using a screwdriver wrapped with protective tape, remove the No. 1 fuel suction pipe bracket, then carefully take out the fuel pump from below. Press the lower locking clip by hand to remove the O-ring of the fuel pump.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.