What are the new items added to Subject 2?

Is the rear wheel toe-out normal for Wuling Hongguang S3?

Wuling Hongguang S3 rear wheel toe-out is a normal phenomenon. Generally, negative camber represents better flexibility, while positive camber provides more stable straight-line performance. However, if the wheel camber is severe, it can be adjusted by displacing the ball joint in the long hole of the lower suspension arm. The dimensions of the Wuling Hongguang S3 are 4655mm in length, 1735mm in width, and 1790mm in height, with a wheelbase of 2800mm. The body type is a 5-door, 7-seat SUV, equipped with a 6-speed manual transmission and a 1.5L L4 naturally aspirated engine, delivering a maximum horsepower of 99ps, maximum torque of 140nm, and a top speed of 150km/h.

9

3

Share

Why is the Audi start-stop function not working?

Audi start-stop function may not be working because the automatic start-stop button on the car was accidentally pressed, causing the system to shut down. It is recommended that the owner check whether the system is turned off. The engine automatic start-stop system is a set of systems that automatically shuts down the engine when the vehicle stops temporarily (such as waiting for a red light) during driving, and automatically restarts the engine when it is necessary to continue moving forward. Audi is a luxury car brand under Audi AG, a subsidiary of the Volkswagen Group of Germany. As a representative of high technical level, quality standards, innovation ability and classic car models, Audi is one of the car brands. Taking the Audi A3 as an example, the car has a length, width and height of 4343mm, 1815mm, and 1458mm respectively, with a wheelbase of 2630mm.

15

2

Share

How to Open the Hood of a Buick Verano?

Method to open the hood of a Buick Verano: 1. Open the driver's door, enter the driver's seat, and then turn off the car; 2. Shift into neutral, locate the hood release button, which is positioned at the left side of the driver's leg area or below the left side of the steering wheel. Press the button to release the hood; 3. Lift the hood manually and support it with the prop rod. The Buick Verano has dimensions of 4723mm in length, 1802mm in width, and 1466mm in height, with a wheelbase of 2700mm. It is a 4-door, 5-seater sedan equipped with a 6-speed automatic transmission and a 1.0T L3 turbocharged engine, delivering a maximum horsepower of 125ps and a peak torque of 180nm.

6

5

Share

What are the steps for replacing spark plugs in a car?

Steps for replacing spark plugs in a car: 1. Prepare tools. The tools needed for replacing spark plugs are a quick wrench and sockets. The socket sizes required for this model are 16mm and 8mm, which may vary for other models. However, any socket size that can unscrew the bolts will suffice; 2. Unscrew the high-voltage terminal; 3. Remove the spark plug; 4. Install the new spark plug. Spark plugs, commonly known as sparkers, function by discharging the high-voltage pulses sent through the spark plug wire, creating an electric spark that ignites the air-fuel mixture in the cylinder by breaking down the air between the two electrodes of the spark plug.

2

Share

What engine does the Cadillac Escalade use?

The Cadillac Escalade is equipped with a 6.2-liter naturally aspirated engine, featuring 8 cylinders arranged in a V-formation with a DOHC valve train. In terms of exterior design, the Escalade's eye-catching chrome grille inherits the avant-garde styling of the Sixteen concept car, while seven chrome accents along the body sides give the vehicle a radiant appearance. Despite its imposing stature, the Escalade boasts an exceptionally low drag coefficient. The Cadillac Escalade measures 5697mm in length, 2045mm in width, and 1880mm in height, with a wheelbase of 3302mm, and is paired with an 8-speed automatic transmission.

18

0

Share

What are the methods for adjusting valve clearance?

Adjusting valve clearance involves the following steps: 1. Based on the firing order of the cylinders, determine when a particular piston is at the top dead center of the compression stroke, then adjust the intake and exhaust valve clearances for that cylinder; 2. After completing the adjustment, rotate the crankshaft and proceed to adjust the valve clearances for the remaining cylinders in the same manner. Valve clearance is categorized into cold engine values and hot engine values, and measurements should be taken under the conditions specified for the vehicle. When the engine is running, the valves expand due to increased temperature. If there is no clearance or insufficient clearance between the valves and their transmission components when cold, thermal expansion during operation will cause the valves to not close properly, leading to leakage during the compression and power strokes. This results in reduced power output and, in severe cases, difficulty starting. To prevent this, a certain clearance is typically maintained between the valves and their transmission components when the engine is assembled cold, to compensate for thermal expansion. This clearance is known as valve clearance.

19

1

Share

What are the new items added to Subject 2?

Is the rear wheel toe-out normal for Wuling Hongguang S3?

Why is the Audi start-stop function not working?

How to Open the Hood of a Buick Verano?

What are the steps for replacing spark plugs in a car?

What engine does the Cadillac Escalade use?

What are the methods for adjusting valve clearance?

How to start the Buick GL8 when the remote key is out of battery?

Is the GM L2B One of the Top Ten Engines?

How many seats does the Cadillac XT5 have?

What is the body structure of the Aston Martin V8 Vantage?