What are the new driving test regulations?

1 Answers
Rojas
07/30/25 8:52am
New driving test regulations include simulated highway toll card collection, narrow road U-turns, simulated tunnel driving, and passing through width-restricted gates. Below are the relevant details: Content of the new driving test regulations: Four new items will be added to Subject 2 of the driving test. These four new items are simulated tunnel driving, width-restricted gates, narrow road U-turns, and parking for toll card collection. Some items in Subject 2 and Subject 3 can be completed directly in simulated teaching, with a stipulated simulation teaching duration of 4 hours. Notes on the new driving test regulations: Theoretical training is limited to a maximum of 4 hours per day, and any training time exceeding 4 hours will be calculated as 4 hours. During the timing process, a verification code will pop up each time, requiring the trainee to verify promptly. Failure to verify will pause the timing, and the test will continue timing after the trainee inputs the code.
Was this review help?
5
3
Share
More Forum Discussions

Where is the heater valve located on the Xiangling M2?

The heater valve of the Xiangling M2 is located in the middle of the air conditioning control area on the center console. The method to turn on the heater is as follows: first start the engine for preheating, wait until the engine temperature pointer reaches the middle position, then turn on the heating air conditioning, and rotate the temperature control knob to the red zone to activate the air conditioning heater. The Xiangling is a light-duty truck under Beiqi Foton. The cargo compartment dimensions of the Xiangling M2 are 3.1 meters in length, 1.71 meters in width, and 1.7 meters in height, while its body dimensions are 5280mm in length, 1850mm in width, and 2590mm in height, with a wheelbase of 2850mm. The vehicle's curb weight is 1.77 tons, its rated load capacity is 1.465 tons, and its gross vehicle weight is 3.365 tons.
16
1
Share

Is the Audi A6L equipped with a wet dual-clutch transmission?

The Audi A6L is equipped with a wet dual-clutch transmission. A wet dual-clutch transmission uses hydraulic pressure for clutch engagement, controlling the transfer of driving force during the processes of clutch disengagement, full engagement, and even under conditions of relative rotation. The Audi A6L is a mid-to-large-sized sedan under the Audi brand, with dimensions of 5038mm in length, 1886mm in width, and 1475mm in height, and a wheelbase of 3024mm. The Audi A6L is powered by three engine options: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 3.0-liter turbocharged V6 engine. The low-power 2.0-liter turbocharged engine delivers a maximum power of 140 kW and a maximum torque of 320 Nm; the high-power 2.0-liter turbocharged engine produces a maximum power of 165 kW and a maximum torque of 350 Nm; the 3.0-liter turbocharged V6 engine generates a maximum power of 250 kW and a maximum torque of 500 Nm.
16
3
Share

How to Turn Off the Auto Start-Stop Function in a Vehicle?

Methods to turn off the auto start-stop function in a vehicle: 1. Press the brake pedal while the vehicle is in normal driving mode; 2. At this point, the auto start-stop system begins to work, and the indicator light on the dashboard will illuminate; 3. Press the OFF button of the auto start-stop system, and wait until the dashboard displays that it has been turned off. The engine auto start-stop system is designed to automatically shut off the engine when the vehicle comes to a temporary stop during driving and to restart the engine automatically when it's time to move forward again. Once the auto start-stop is activated, pressing the brake pedal slightly harder will cause the engine to shut off, and releasing the brake will restart the engine. The auto start-stop system achieves this by incorporating an enhanced motor with idle start-stop functionality into the traditional engine, allowing the engine to completely shut off when the vehicle meets the conditions for idle stopping. When the vehicle needs to start moving again, the idle start-stop motor system quickly responds to the driver's command, rapidly restarting the engine for seamless transition, thereby reducing fuel consumption and exhaust emissions.
16
1
Share

What is the minimum age to obtain a motorcycle license?

Motorcycles are classified as motor vehicles. According to relevant regulations, citizens aged between 18 and 60 years old can apply for a motorcycle license. Below is relevant information: Regulations: Individuals aged 60 or above are not permitted to drive large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams. Those holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks must visit the vehicle management office at the place where the motor vehicle license was issued or another location to exchange their license for one that permits driving small cars or small automatic transmission vehicles. Motorcycle License: Motorcycle licenses are categorized into Class D and Class E. Class D covers ordinary three-wheeled vehicles and includes Class E, while Class E is for ordinary two-wheeled motorcycles. If you have a C1 driver's license and wish to ride a motorcycle, it is advisable to additionally obtain a Class D or Class E license. This allows you to legally ride a motorcycle on the road. Otherwise, if caught by traffic police, you may face a 12-point deduction on your license and even have your motorcycle impounded.
13
0
Share

What are the precautions for vehicle maintenance in summer?

Precautions for vehicle maintenance in summer: 1. Check tire pressure and temperature to prevent blowouts. High summer temperatures can increase tire wear due to excessive pressure and may cause blowouts, so regularly inspect tire temperature and pressure while driving in summer; 2. Monitor engine coolant temperature rise and avoid running the engine with insufficient coolant; 3. Prevent vehicle self-ignition due to aging wiring, and frequently inspect fuel lines to avoid oil leaks; 4. Be cautious of brake system overheating leading to brake failure. Before driving, check if the water sprayer is functioning properly and if there is sufficient water in the tank; 5. Equip a car fire extinguisher for timely self-rescue.
18
0
Share

How to Determine If Brake Fluid Needs Replacement

To determine if brake fluid needs replacement, check its water content. If the water content reaches 3%, the brake fluid should be replaced immediately. When brake fluid absorbs a certain amount of water, its boiling point decreases because water has a lower boiling point. During braking, the heat generated can cause the brake fluid to heat up. If the brake fluid contains water, it may boil and vaporize, leading to vapor lock and reduced braking performance. Brake fluid, also known as hydraulic brake fluid, can be tested for water content using a moisture detection pen available at 4S shops. Simply insert the pen into the brake fluid reservoir to check the water content. If a moisture detection pen is not available, it is recommended to replace the brake fluid every 2 years.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.