···
Log in / Register

What are the new driving test regulations?

1 Answers
JulianaDella
07/29/25 4:00am
The new driving test regulations allow for self-study and direct testing at designated pilot locations. Students can use reserved vehicles equipped with safety auxiliary devices, under the guidance of accompanying personnel with driving experience, to learn and practice driving safety according to specified routes and schedules, and then apply for the test promptly. Regulations related to the driving test: After passing the first subject test, candidates can schedule either the second subject (venue test) or the third subject (actual road test), or even schedule both subjects two and three to be taken consecutively on the same day. Methods for practicing at the test site: You can contact the instructor to inquire about the possibility of practicing at the test site in advance. The practice test is not the official test; it is only meant to familiarize candidates with the test site environment.
Was this review help?
12
3
Share
More Forum Discussions

What causes the beeping sound while driving an Audi?

Audi driving in the beeping sound may be due to the handbrake not being released or not wearing a seat belt. You can check if there is a teapot symbol on the dashboard, which indicates insufficient oil pressure. Relevant information about car seat belts is as follows: 1. Introduction: The car seat belt is a safety device designed to restrain occupants during a collision and prevent secondary collisions with the steering wheel or dashboard, or to avoid injuries caused by being thrown out of the vehicle. 2. Working principle: The retractor contains a ratchet mechanism. Normally, occupants can pull the webbing freely and evenly on the seat, but when the webbing stops being pulled out continuously or when the vehicle encounters an emergency, the ratchet mechanism locks the webbing automatically to prevent it from being pulled out further.
14
2
Share

What are the disadvantages of the Kymco AK550?

The disadvantages of the Kymco AK550 include: no traction control system, poor readability of the instrument panel, and a short cruising range. Below is an introduction to the Kymco AK550: 1. The AK550 has excellent stability in corners: The front disc brake provides excellent braking performance, paired with the Bosch 9-series ABS, which effectively prevents rear wheel lock-up. The factory-fitted Metzeler Feelfree tires offer good grip, allowing for confident riding even without TCS on dry roads with temperatures above 20 degrees Celsius. 2. Braking: The front brake uses Brembo products, with a well-configured braking system that provides strong braking force. With the help of ABS, the rear brake can be used freely in corners to reduce the turning radius.
17
1
Share

How to use the cruise control on GAC Trumpchi GS4?

The method to use the cruise control on GAC Trumpchi GS4 is as follows: First, press CRUISE to activate the cruise function, and a white cruise light will illuminate on the dashboard. When the vehicle speed reaches the desired cruising speed (above 40km/h), press the SET minus button, and the cruise light on the dashboard will turn green, indicating that the speed is set. Release the accelerator, and the vehicle will maintain the set speed. More information about the cruise control on Trumpchi GS4 is as follows: 1. The cruise control switch is located in the functional area on the right side of the steering wheel. 2. The button functions are: CRUISE (turn on/off cruise); SET minus (set speed/decelerate); RES plus (accelerate/resume cruise); CANCEL (pause cruise).
8
5
Share

What transmission does the Buick Velite 6 use?

The Buick Velite 6 is equipped with two types of transmissions: a 6-speed dual-clutch transmission and a 6-speed automatic transmission. More details about the Velite 6 are as follows: 1. The Velite 6 features a sleek and sporty exterior design with a youthful appeal, sharing a similar front end with the Buick Excelle and a large rear end typical of a station wagon. It comes standard with daytime running lights and automatic headlights, offering good configuration. 2. The interior of the Velite 6 is highly consistent with that of the Excelle, with a symmetrical design that fits well with its family-oriented positioning. The strong three-dimensional effect created by the lines is notable. Additionally, the Velite 6 has adjusted its color scheme for the station wagon version, incorporating vibrant seat colors, which significantly enhances the overall style.
11
5
Share

How to adjust the headrest of Mercedes-Benz C260L?

There is a dot on the headrest, press it to adjust the height. The car headrest plays a crucial protective role for passengers in emergency situations. Below are the relevant details: 1. Headrest too high: Cannot cushion head impact. The softest part of the headrest is in the middle. If the headrest is too high, the back of the head can only touch the lower edge of the headrest, rendering it ineffective as a cushion. 2. Headrest too low: May cause cervical fracture. Adjusting the headrest too low can have severe consequences. In the event of a collision, the head will instantly rebound against the headrest due to inertia. If the headrest is too low, the neck will whip against it, potentially causing a fatal cervical fracture.
11
4
Share

What is the fuse number for the Cruze air conditioner?

Chevrolet Cruze commonly uses high-current fuses and medium-low current fuses. The medium-low current fuses are generally more accessible. Medium-low current fuses can be roughly divided into blade fuses (including automatic fuse box mini fuses), plug-in fuses, screw-in fuses, tubular fuses, and flat fuses. Here is more information: 1. International standard for fuse colors: 2A gray, 3A purple, 4A pink, 5A orange, 7.5A brown, 10A red, 15A blue, 20A yellow, 25A transparent, 30A green, and 40A dark orange. Different amperage ratings can be clearly distinguished by their colors. 2. Function: Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will melt within seconds to protect the circuit. They are commonly used for overcurrent protection in automotive circuits and also for overcurrent protection in industrial equipment.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.