···
Log in / Register

What are the must-know tips for passing the B2 license Subject 2 test?

3 Answers
LeDamian
09/06/25 3:25am
B2 license Subject 2 test tips are: drive as slowly as possible, steer the wheel correctly, and align the car body properly. Before entering each test section, try to keep the car body parallel to the boundary lines. Here are the details: Drive as slowly as possible: Poor speed control is the most common cause of crossing the line. As a beginner, your ability to judge wheel distance and react is not strong, so driving slowly ensures better vehicle control. Steer the wheel correctly: Except for the slope stop and start, the other four sections of Subject 2 require steering the wheel. Remember this rule: steer as much as you need to correct, steer less for minor corrections, steer slowly for slow corrections, steer more for major corrections, and steer quickly for fast corrections. Unsteady steering can easily cause the car body to tilt. Learn to judge the position by observing the rearview mirrors and adjust toward the wider side. Align the car body properly: Before entering each test section, try to keep the car body parallel to the boundary lines. If the car body is not aligned, it will be like buttoning a shirt wrong—everything will be off. You can check the rearview mirrors to see if the car body is parallel to the boundary lines or observe if the front of the car is roughly parallel to the lines.
Was this review help?
15
2
Share
DeMary
09/18/25 3:26am
I recently passed the B2 Subject 2 test and found there's no secret trick—just lots of practice and a good mindset. Subject 2 mainly tests reversing into a garage, parallel parking, and stopping on a slope. Many people fail because they get nervous, their hands shake, or they have poor spatial awareness. During practice, I always took a few deep breaths before starting to ensure I was relaxed. On the exam day, don't overthink the outcome—treat it like playing a simulation game with friends. The key to reversing into a garage is to go very, very slowly and find your reference points, like aligning the bottom of the rearview mirror with the garage line before turning the wheel, and don't rush to straighten the wheel too quickly. I usually timed each practice session for at least half an hour to build muscle memory, which naturally leads to stability. Remember: drive slowly, aim accurately, stay calm, and the test will be easier to pass.
Was this review help?
2
5
Share
Expand All
HopeAnn
11/01/25 3:53am
I think the key to passing Subject 2 smoothly is to nail every detail. For reverse parking, adjust the mirrors properly to ensure clear visibility of the car body and lines, and keep the speed as slow as a turtle crawling. Be patient during parallel parking, and make sure to straighten the steering wheel at the right time—not too early or too late. During practice, you can find an open space and stick adhesive dots on the car as markers. For the hill start, check the brakes and handbrake, and avoid rolling back when starting. Many beginners overlook seat belts and turn signals, and these small mistakes can cost a lot of points. I recommend recording videos during mock tests to review errors. In short, familiarize yourself with the test layout in advance, stay calm during the test, and take breaks after an hour of daily practice—relaxed body conditions make it easier to perform well.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

What is the sewing method for a steering wheel cover?

First, place the steering wheel cover over the steering wheel, using the built-in seam as a reference point for alignment. To prevent slipping during sewing, secure it with tape. Adjust the position, align the curves, and tuck the edges of the steering wheel cover into the seams. Before sewing, leave a thread length 2-3 times the length of the arc to be sewn. When sewing the upper half, you can start the car, turn the steering wheel 180 degrees, and then turn off the engine. Continue sewing in this manner, ensuring the leather cover remains aligned throughout the process. Pay attention to the tightness of the thread to prevent looseness after sewing.
15
3
Share

How to Adjust the Steering Wheel of Xingrui?

Open the car door and enter the driver's seat. Locate the lever on the left side of the steering wheel and push it upward. Hold the steering wheel with both hands and pull it up, down, forward, or backward to adjust. After adjusting to your desired position, reset the lever switch.
4
5
Share

How to Deal with Automatic Opening of Octavia's Sunroof?

When the vehicle is powered on, push the sunroof control switch backward to its limit position and release it. The sunroof will then automatically open to the middle position or fully open. Before opening the sunroof, if the sunshade is closed, the system will automatically open the sunshade to the middle position first and then open the sunroof.
2
0
Share

How to Open the Car Door When the Smart Key is Locked Inside?

When you buy a car, it usually comes with two keys. If one key is locked inside, you can use the spare key to open the door. If the spare key is not nearby, you can look for a nearby dealership of the car brand to help resolve the issue. If neither of the above options works, find a professional locksmith.
13
2
Share

How to Replace a Car Headliner?

First, remove components such as the sun visors, dome light, and handles. After removal, clean the headliner thoroughly, organize all wiring, flatten the front seats, and pull the headliner out through the rear door. At this stage, be careful not to cut too much, as any excess trimming can make the exposed part of the headliner look unattractive. Once securely adhered, reinstall the removed components.
4
1
Share

How to Reset the Expired Vehicle Condition Check for Lavida Plus?

Press and hold the button on the right side of the odometer. Power on the vehicle. Wait until the dashboard displays "Confirm Reset," then press the OK button on the steering wheel to reset. The vehicle condition check will be canceled. Then insert the key and start the car. Once the dashboard lights up and the car enters self-check mode, the vehicle will display the option to reset the vehicle condition check.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.