What are the models of diesel cars available?

1 Answers
Emilio
07/30/25 10:07am
Diesel cars available in the market include the Audi A6L diesel version, BMW 3 Series diesel version, etc. Here is some related information about diesel: Concept: Diesel is a light petroleum product, a complex mixture of hydrocarbons (carbon atoms number about 10-22), used as fuel for diesel engines. Properties: Diesel has a boiling point range and viscosity between kerosene and lubricating oil. It is flammable, volatile, insoluble in water, and soluble in alcohols and other organic solvents. It is a complex mixture with two boiling point ranges: 180°C-370°C and 350°C-410°C. Uses: Diesel is mainly used as power for tractors, large vehicles, diesel locomotives, construction machinery, excavators, loaders, fishing boats, diesel generator sets, and agricultural machinery. It serves as fuel for diesel cars, tractors, and other diesel engines.
Was this review help?
6
4
Share
More Forum Discussions

Is It Safe to Drive with a Broken Shock Absorber?

Driving with a faulty shock absorber can be dangerous. The most common issue with shock absorbers is oil leakage. Once a shock absorber starts leaking oil, the internal hydraulic system loses pressure balance, leading to reduced or completely lost shock absorption effectiveness. This means the shock absorber can no longer control the frequency of the spring's movement, causing the vehicle's suspension springs to oscillate too rapidly and excessively while driving. This can potentially lead to loss of vehicle control, making driving extremely hazardous. Additional relevant information is as follows: 1. Function: The primary role of a car's shock absorber is to dampen the oscillations from the spring's rebound after absorbing shocks and to mitigate impacts from the road surface. When driving over uneven surfaces, while the suspension springs can filter out road vibrations, the springs themselves still undergo reciprocating motion. The shock absorber is designed to suppress this spring movement. 2. Replacement: When replacing shock absorbers, it is generally recommended to replace both shock absorbers on the same axle simultaneously. If not, the differing damping effects of the two shock absorbers can result in inconsistent steering feel between left and right turns, as well as uneven body roll. This not only affects ride comfort but, more critically, impairs the vehicle's handling. It can make the car difficult to control during high-speed lane changes, overtaking, or cornering, thereby increasing driving risks.
16
1
Share

Which consumes more fuel, 2.5L or 2.0T?

2.0T engines are generally more fuel-efficient than 2.5L engines because turbocharged engines require more fuel consumption to maintain stronger power output. Here are more factors that affect a car's fuel consumption: 1. Drag coefficient: Drag is the resistance from air when the vehicle is moving. Tests show that when a car moves at 80km/h, 60% of the fuel consumption is used to overcome air resistance. Therefore, the faster the vehicle speed, the greater the resistance it needs to overcome, and the higher the fuel consumption. 2. Tires: As the only part of the car that contacts the ground, tires play a decisive role in the overall performance of the vehicle. Different tires can also make a noticeable difference in fuel consumption and comfort. The main factor affecting fuel consumption is the width of the tires, while the thickness of the tire walls affects comfort. 3. Transmission: From a fuel consumption perspective, dual-clutch transmissions and CVT transmissions are the most fuel-efficient, while torque converter transmissions are relatively more fuel-consuming. Of course, this is also related to the number of gears in the torque converter transmission. The more gears there are, the clearer the gear division, allowing different gears to match different speeds for better fuel efficiency. Conversely, fewer gears result in higher fuel consumption.
3
2
Share

What is the difference between 2.0t and 2.0td?

The differences between 2.0t and 2.0td include different types, applications, boosted gases, and fuel requirements, as detailed below: Different types: 2.0td engine is a turbocharged direct-injection diesel engine; 2.0t engine is a turbocharged diesel engine with Bosch high-pressure common rail technology. Different applications: 2.0td is mostly used in trucks; 2.0t is mostly used in urban SUVs. Different boosted gases: The boosted gas in 2.0td is a mixture. The boosted gas in 2.0t is just air. Fuel requirements: 2.0t has lower noise but higher fuel quality requirements. 2.0td has an older powertrain with less power but lower fuel quality requirements. The "TD" in car engines stands for turbocharged. Turbo Direct Injection engine (Turbo Direct Injection), abbreviated as TD. The intake volume of a 2.0L naturally aspirated engine is lower than that of a turbocharged engine, resulting in average acceleration performance. The 2.0T engine's acceleration and power are significantly greater than the 2.0L, generally comparable to a 2.5L engine. To address the inherent shortcomings of SDI, a turbocharger is added to the diesel engine, greatly increasing the intake pressure. The compression ratio is usually above 10, allowing for high torque at low RPMs. Moreover, due to more complete combustion, the harmful particulate emissions are significantly reduced. The TDI-equipped turbocharged direct-injection diesel engine (TDI) is highly advanced, incorporating multiple cutting-edge technologies such as the pump-jet system and variable vane turbochargers, which are applied in passenger cars. It utilizes the latest high-pressure fuel injection technology—the pump-jet system. This system ensures more thorough mixing of diesel and air, leading to more complete combustion. Additionally, an oxidation catalytic converter significantly reduces CO, HC, and particulate emissions, with CO2 emissions being 30% lower compared to gasoline vehicles of the same displacement. Furthermore, the EGR system greatly reduces NOx production, meeting Euro 3 emission standards.
1
2
Share

What is the battery model for a Buick car key?

The battery model is CR2032. It is a lithium manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery is cylindrical in shape, with F used as a substitute if it is square; 20 indicates the battery diameter is 20mm; 32 represents the battery height is 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is approximately 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is low or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal usage conditions (sealed, room temperature, no moisture, etc.), the lifespan can be further extended to 8 years or even 10 years. The usage time of a car remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter the lifespan will be. If the remote key battery runs out, you can directly use the mechanical key to open and start the vehicle. The batteries used in car remote keys are button batteries, mainly including models: CR2016, CR2025, CR2032, and CR2450. For the specific model used in each key, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: The usage rate of car key remotes is very high, making it one of the most common car remote batteries. The voltage of this battery is 3V, while most car key batteries are powered by 9V, so all three batteries need to be replaced each time. Examples include Guangben, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter is 20mm, thickness is 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016. However, some car keys still use it. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter is 20mm, thickness is 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium-manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode material is metallic lithium, and the electrolyte is a lithium battery. The main components of the electrolyte are dimethoxyethane, propylene carbonate, and lithium perchlorate. It is shaped like a button, hence the name button lithium battery or lithium-manganese button battery. Button battery CR2450: Compared to the other three models, it is thicker and larger, with a diameter of 24.5mm and a height of 5.0mm. The rated current value of CR2450 is 0.2mA, mainly used in low-power electronic products. Generally, the battery can provide an output current of 0.001mA to 5mA, with a continuous output current of up to 15mA and a flash output current of up to 30mA, meeting the requirements of most small electronic products for light emission, sound production, and RF output.
5
1
Share

What is the trunk space of the Elysion?

Honda Elysion trunk volume is 31cm*110cm*80~90cm. The following are relevant details: 1. Body dimensions: The vehicle's length*width*height (mm) is 4950*1842*1711. 2. Body structure: 5-door, 7-seat MPV. 3. Suspension type: Front suspension is MacPherson strut independent suspension; rear suspension is torsion beam non-independent suspension. 4. Features: The Honda Elysion is equipped with rearview camera, full-speed adaptive cruise control, panoramic sunroof, blind spot monitoring system, etc.
17
4
Share

How to Restore the Mileage Range on a Car?

Car's mileage range cannot be restored on its own and requires professional restoration at a 4S shop. Generally, if the vehicle's mileage range disappears, it may be caused by a car circuit or dashboard malfunction, and it is recommended to conduct timely inspection and repair. Mileage range can also be referred to as endurance capability, which indicates the total distance a vehicle or ship can continuously travel under maximum fuel reserve. For electric vehicles, the mileage range refers to the distance traveled from a fully charged state of the power battery to the end of the test as per standard regulations, and it is also an important economic indicator for electric vehicles.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.