What are the models of BMW sports cars?

1 Answers
OTalia
07/29/25 11:50pm
BMW offers 6 models of sports cars: BMW M2, BMW M4, BMW 2 Series, BMW 4 Series, BMW Z4, and BMW 8 Series. BMW sports cars include: BMW M2: A compact sports car, the BMW M2 is a model that focuses on performance. Although its exterior design is relatively conventional and the interior design is more practical, the S55 engine it is equipped with can provide an excellent driving experience. BMW M4: A mid-size sports car, the M4 not only has a more aggressive and sporty appearance but also attracts a lot of attention. This generation of the BMW M4 has not only a more radical design but also improved power, with 450 horsepower and 550 Nm of peak torque, offering owners an ultimate driving pleasure. BMW 2 Series: The BMW 2 Series is an imported two-door, four-seater coupe for family use, emphasizing style. Its fashionable exterior has won the favor of many consumers. The engine tuning doesn't give a sports car feel, but with good handling as its main feature, there's no need to worry about the BMW 2 Series lacking the feel of a sports car. BMW 4 Series: As a highly distinctive entry-level sports car, the BMW 4 Series offers three models to choose from: hatchback, hardtop, and hardtop convertible. Normally, the hatchback version is more attractive to domestic users. This model focuses on sportiness while still being suitable for family use. BMW Z4: The new BMW Z4 has undergone significant improvements in exterior design. Although it still features a long hood and short rear end, the front face has become more aggressive, with a fierce and sharp look like an eagle ready to strike, exuding a strong sense of combativeness. BMW 8 Series: The new 8 Series is 20 years apart from the previous generation, and the 8 Series has always represented BMW's most advanced sports genes. The 3.0T turbocharged engine can deliver 340 horsepower and 500 Nm of torque, and even at idle, the roar from the exhaust can be clearly heard inside the car.
Was this review help?
9
5
Share
More Forum Discussions

What Are the Reasons for Abnormal Noise When Braking in a Car?

The reasons for abnormal noise when braking in a car are: 1. Corrosion of the brake disc or brake pads; 2. New brake pads; 3. Excessive wear of the brake disc and brake pads; 4. Incorrect installation or mismatched model of brake pads; 5. Use of low-quality or overly hard brake pads; 6. Abnormal brake caliper or lack of brake fluid; 7. Presence of foreign objects between the brake drum or disc and the pads. Solutions for abnormal noise when braking in a car: 1. Apply butter or special lubricant at the connection between the brake pads and the brake caliper; 2. Regularly inspect and replace the brake pads; 3. Regularly adjust the brakes; 4. Avoid frequent use of the brakes.
9
1
Share

What is the rear metal plate of the Mondeo engine?

The rear metal plate of the Mondeo engine is an engine guard. The function of the engine is to convert the heat energy of gasoline or diesel into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston to do work. Taking the 2020 Mondeo as an example, it is equipped with a 1.5T direct-injection 4-cylinder turbocharged engine, with a maximum torque of 243 Nm and a maximum power of 134 kW. The 2020 Mondeo is a sedan with a body size of 4873mm in length, 1852mm in width, 1470mm in height, a wheelbase of 2850mm, a minimum ground clearance of 170mm, a body weight of 1592kg, and a fuel tank capacity of 62L.
15
0
Share

What is the method for replacing the coolant in the Excelle?

The method for replacing the coolant in the Excelle is: 1. Open the engine compartment hood of the vehicle, and the coolant reservoir can be seen in the upper right corner; 2. Open the coolant drain plug under the radiator to drain the old coolant; 3. Add new coolant, tighten the cap, and the coolant replacement is complete. Taking the 2020 Excelle as an example, it is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 113ps, a maximum torque of 141Nm, and a maximum power of 83kW, paired with a 5-speed automatic transmission. The body dimensions of the 2020 Excelle are: length 4609mm, width 1798mm, height 1464mm.
1
4
Share

What are the steps for stopping at a red light with an automatic transmission?

Automatic transmission stopping at a red light steps are: 1. When approaching a red light, release the accelerator in advance and gradually apply the brake until the vehicle comes to a complete stop; 2. After stopping, shift the gear to N (neutral), engage the handbrake, and then release the foot brake. The principle of automatic transmission is to use planetary gear mechanisms for shifting. Driving tips for automatic transmission cars include: 1. Start gently by pressing the accelerator, always start in P (park) or N (neutral) gear, and avoid coasting in neutral; 2. Shift to N (neutral) when waiting at a red light or during brief stops, and use P (park) when parking; 3. Never shift into P (park) while the vehicle is moving; 4. Ensure the vehicle is completely stopped before shifting into R (reverse) for backing up.
3
3
Share

What are the reasons for the engine light coming on in a car?

There are several reasons why the engine light in a car may come on: 1. Damage to the water temperature, crankshaft position, air flow, intake temperature, or oxygen sensors; 2. Poor engine maintenance; 3. Failure to add fuel and oil as required, leading to engine wear; 4. Poor combustion of the engine's air-fuel mixture due to faulty spark plugs, ignition coils, fuel pump, or clogged fuel lines; 5. Engine blockage caused by not regularly cleaning the air filter. Solutions for the engine light coming on include: 1. Regularly inspecting related engine components; 2. Avoiding poor driving habits and choosing reputable gas stations for fuel.
18
1
Share

What are the types of automatic transmission oil pumps?

Automatic transmission oil pumps include: internal gear pumps, rotor pumps, and vane pumps. The automatic transmission oil pump is installed behind the torque converter and is driven by the shaft sleeve at the rear end of the torque converter housing. Its function is to generate hydraulic oil of the required pressure to supply the torque converter, actuating elements, electronic control system, and valve body, as well as to provide lubrication for the internal components of the transmission that require lubrication. The components of an automatic transmission include: 1. Torque converter; 2. Transmission gear mechanism; 3. Oil supply system; 4. Automatic shift control system; 5. Shift operating mechanism. Maintenance of automatic transmissions: 1. Check whether the automatic transmission fluid level is normal; 2. Regularly replace the transmission fluid.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.