What are the models equipped with wet dual-clutch transmission?

What are the differences in appearance between the Porsche 718 and 911?

The main difference in appearance between the Porsche 911 and 718 lies in the rear doors: the 911 does not have air intakes on the rear doors, while the 718 does. Porsche is a luxury car brand under the Volkswagen Group, a major representative of European and American automobiles, headquartered in Stuttgart, Germany. Porsche is renowned for manufacturing sports cars and participating in motorsports. Here is some related information about Porsche: 1. Introduction: Porsche, a world-famous luxury car brand under Volkswagen, also known as "Porsche," is headquartered in Stuttgart, Germany, and is one of the primary representatives of European and American automobiles. Its main models include the 911, 718, Boxster, Cayman, Panamera, Cayenne, and Macan. 2. Logo Meaning: The English logo of Porsche uses the surname of the company's founder, Ferdinand Porsche. The graphical logo adopts the shield-shaped city emblem of Stuttgart, where the company is based. The word "PORSCHE" is at the top of the logo, indicating that the trademark is owned by Porsche Design Company. The word "STUTTGART" appears above the horse in the logo.

19

4

Share

How to Clean a Diesel Particulate Filter?

Remove the end cover and take out the external filter element for cleaning. Use a soft-bristled brush to gently sweep away dust particles from the filter surface along the pleat direction. Diesel particulate filters operate via two regeneration methods: active and passive. The system actively creates conditions to process particulate matter.

14

0

Share

Where is the handbrake of Porsche 718?

Porsche 718 uses an electronic parking brake, and there is no longer a handbrake lever. It is an electronic button. The position is also not in the traditional car handbrake lever position. It is located below the steering wheel, on the left side (next to the headlight knob). Here is some additional information: 1. Brake system: Porsche's brake system consists of steel plates, bonded heat insulation layers and friction blocks. The steel plates are coated to prevent rust, and the coating process is monitored by an SMT-4 furnace temperature tracker to ensure the temperature distribution during the coating process to guarantee quality. The heat insulation layer is made of non-heat-conducting materials to insulate heat. 2. Automobile braking system: It refers to a series of special devices that apply a certain pressure to certain parts of the car (mainly the wheels) to enforce a certain degree of braking. 3. Function of the braking system: To make the moving car decelerate or even stop as required by the driver; to keep the parked car stable under various road conditions (including on slopes); to maintain a stable speed for the car going downhill.

14

0

Share

Detailed Steps for Removing the Half Shaft?

It is necessary to first remove the wheel, then proceed to remove the brake disc and brake caliper, after which the sealing rubber sleeve between the half shaft and the transmission can be seen. The half shaft and the transmission are tightly connected using a flange, and after removing the wheel and brake disc, the half shaft is fully exposed.

11

1

Share

What Causes the Noise from the Lower Control Arm When Braking in an Audi A4L?

Audi A4L produces noise from the lower control arm when braking, and the common causes include the following: 1. Noise when braking in a new car: The brake pads and brake discs of a new car have not been fully broken in, so they may sometimes emit a "squeaking" friction sound, which is normal. The noise will naturally disappear after some use. 2. Noise after replacing brake pads: After installing new brake pads, incorrect installation may cause noise. Common installation errors include installing the brake pads backward, with the metal side touching the brake disc, leading to noise. 3. Noise due to brake disc issues: Prolonged use can cause deep grooves on the brake disc surface or deep steps on the edges. Uneven contact between the brake pads and the brake disc can produce noise. In this case, the brake disc needs to be replaced or polished using a brake disc repair machine. 4. Noise caused by sand in the brake disc: If foreign objects like sand or small stones get between the brake pads and the brake disc while driving, the brakes may emit a sharp hissing sound. Continuing to drive normally will usually dislodge the sand or stones, eliminating the noise. If the noise persists, the wheel may need to be removed to extract the debris. 5. Noise during hard braking: When braking hard, if you hear a "clicking" sound and feel vibrations in the brake pedal, this is a normal phenomenon caused by the activation of the ABS system.

1

5

Share

What is the reason for the abnormal noise in the Geely Emgrand clutch pedal?

Geely Emgrand clutch pedal abnormal noise is mainly caused by damaged car parts, such as the return spring of the release bearing being damaged, loose bearings or rivets, or broken steel plates. When the engine is idling and the clutch is released, abnormal noise occurs. If the clutch returns normally, check whether the gap between the release bearing and the release lever meets the regulations and adjust it accordingly; if the clutch cannot return normally, it indicates that the return spring of the release bearing is damaged and needs to be replaced in time. When the engine is idling and the clutch is pressed, abnormal noise occurs, indicating that the bearing is damaged, the bearing balls are broken, or there is a lack of oil causing burning, and it needs to be replaced or repaired in time. When the car starts and the pedal is just released, abnormal noise indicates that the rivets of the driven plate and the spline shaft sleeve are loose or the steel plate is broken. If there is a single impact sound when the clutch is engaged, it is generally due to the loose fit between the driven plate spline shaft sleeve and the transmission first shaft; if the driven plate has a damper, it may be due to the broken damper spring. Tighten the loose rivets or replace the broken steel plate.

2

Share

What are the models equipped with wet dual-clutch transmission?

What are the differences in appearance between the Porsche 718 and 911?

How to Clean a Diesel Particulate Filter?

Where is the handbrake of Porsche 718?

Detailed Steps for Removing the Half Shaft?

What Causes the Noise from the Lower Control Arm When Braking in an Audi A4L?

What is the reason for the abnormal noise in the Geely Emgrand clutch pedal?

How long is the range of BYD Dolphin new energy vehicle?

What is the problem with manual transmission gear disengagement?

What brand is Honda motorcycle?

What is the reason why the hand oil pump does not become hard when pressed?