What are the methods to reset the maintenance light on an old Sagitar?

1 Answers
DiZoe
07/29/25 3:17pm
Methods to reset the maintenance light on a Volkswagen Sagitar: 1. Manual reset: There are two buttons at the lower left corner of the instrument cluster. 2. Press the maintenance button (mileage reset button) while turning the ignition key to the on position until you hear a beep, then release the maintenance button and hold for two seconds. 3. Without turning off the ignition, press the minute button (MIN) next to the instrument panel. If the minute time does not move, the reset is complete. Below is additional information on car maintenance: 1. Do not run the engine for extended periods in an unventilated garage. Prolonged exposure to low concentrations of carbon monoxide can cause headaches, shortness of breath, nausea, vomiting, weakness, dizziness, confusion, and even brain damage. 2. Avoid sucking on fuel pipes with your mouth. This can harm the nervous system, digestive tract, and kidneys. 3. Avoid contact with carburetor cleaner. Carburetor cleaner contains methyl chloride, aromatic compounds, and ethanol, all of which are toxic to some extent.
Was this review help?
10
5
Share
More Forum Discussions

How Many Points and Fines for Driving the Wrong Way on a One-Way Street?

Driving the wrong way on a one-way street is considered driving against traffic, which incurs a fine ranging from 20 to 200 yuan and a deduction of 3 points. Below is additional relevant information: 1. Several scenarios of driving against traffic: On roads with solid dividing lines, vehicles entering the opposite lane are considered driving against traffic. This includes double solid lines and single solid lines, which must never be crossed under any circumstances. On roads with dashed dividing lines, vehicles may change lanes to overtake if it is safe to do so, but in the event of an accident, the vehicle changing lanes will be deemed to be driving against traffic. On roads marked with one-way signs, any vehicle entering is considered to be driving against traffic. 2. Basis for penalties: According to the 'Road Traffic Safety Law,' failing to follow prohibited line markings will result in a 3-point deduction. This includes the following situations: Prohibited line markings include yellow single or double solid lines, as well as no-turn, no-straight, or no-U-turn signs.
14
5
Share

What Are the Reasons Why a Spare Key Cannot Unlock the Car Door?

There are several reasons why a spare key might fail to unlock the car door, including remote lock failure, magnetic signal interference, and a dead battery in the spare key. Below are detailed explanations: 1. Remote lock failure: If the spare key cannot unlock the door, it is likely due to remote lock malfunction or factors such as aging of the car's remote transmitter antenna, which may render the remote key ineffective. 2. Magnetic signal interference: Another possibility is strong magnetic signal interference around the car. Since smart keys use low-intensity radio waves, they may not function properly under magnetic interference. 3. Dead battery in the spare key: Remote keys typically use coin cell batteries, which may not be readily available in convenience stores. If there are auto parts stores or 4S shops nearby, these places usually carry them. Car owners can also purchase some online for emergency use.
8
5
Share

How to resolve p261a00 coolant pump 2 open circuit?

p261a00 coolant pump 2 open circuit means there is a fault with a coolant pump that needs to be checked or replaced. Coolant pump 2 is an auxiliary water pump located not far from the main water pump, used for continuous cooling after the car is turned off. Check the wiring harness and the small water pump. It is best to have it inspected and repaired at a 4S shop. Here are the specific solutions for coolant pump 2 open circuit: 1. First, check if the small water pump under the wiper cover is damaged. If the small water pump is faulty, it needs to be replaced. 2. Inspect the air conditioning control solenoid valve to see if there is an open circuit in the wiring or if the solenoid valve itself is damaged. The wiring harness connects directly to the engine computer via a plug without a fuse. Replace the air conditioning control solenoid valve or the wiring harness.
20
1
Share

How to renew a Shanghai C1 driver's license after 6 years of expiration?

You must apply for the renewal procedure three months before the expiration of your driver's license. Since the renewal process takes some time, if the new license has not been processed by the time the old one expires, the old license will become invalid. You need to go to the local vehicle management office for the renewal. Here are the relevant steps for renewing an expired driver's license: 1. Apply for a replacement at the vehicle management office where the driver's license was originally issued or at another vehicle management office. Obtain the "Motor Vehicle Driver's Physical Condition Certificate" and the "Motor Vehicle Driver's License Application Form", attach photos as required, and fill in the information. 2. You need to go to the hospital or medical examination center designated by the vehicle management office and undergo a physical examination according to the process. Be sure to bring the original driver's license, ID card, forms, and copies. After completing the procedure, you can receive the new driver's license on the spot.
10
4
Share

What are the penalties for driving restricted vehicles in Chengdu?

The penalty for driving restricted vehicles in Chengdu is a deduction of 3 points and a fine of 100 yuan. Below is relevant information about vehicle restrictions in Chengdu: 1. Restricted vehicles: All vehicles with "Chuan A" license plates and non-local license plates. 2. Restriction rules: Restricted vehicles are divided into five groups based on the last digit of their license plate number (including temporary license plates), with two numbers in each group. Each group is prohibited from driving within the restricted area during restricted hours on a designated weekday. The tail number combinations and corresponding rules are as follows: Monday for "1" and "6"; Tuesday for "2" and "7"; Wednesday for "3" and "8"; Thursday for "4" and "9"; Friday for "5" and "0". On public holidays that are adjusted to weekdays due to falling on a Saturday or Sunday, the "tail number restriction" is implemented according to the corresponding weekday.
20
4
Share

At what age can you apply for a large vehicle driver's license?

Different vehicle types have different age requirements for application. Here are the relevant details: 1. Age requirements for applying for small cars, mopeds, etc.: For small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, and mopeds, the applicant must be between 18 and 70 years old. 2. Application for low-speed trucks, etc.: For low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old. 3. Application for city buses, etc.: For city buses, large trucks, trolleybuses, or trams, the applicant must be between 20 and 50 years old. 4. Application for medium-sized buses, etc.: The applicant must be between 21 and 50 years old. 5. Application for tractors, etc.: The applicant must be between 24 and 50 years old. 6. Application for large buses, etc.: The applicant must be between 26 and 50 years old.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.