What are the methods to prevent tire blowouts?

How long after obtaining a driver's license can you drive?

You can drive immediately after obtaining your driver's license, but first-time license holders must display a probationary sign when driving. Here is additional information: 1. Legal regulations: The validity period of a motor vehicle driver's license is 6 years. The first 12 months after obtaining a driver's license for the first time is the probationary period. During this period, a uniform probationary sign must be affixed or hung at the rear of the vehicle. Failure to display the probationary sign as required will result in a fine of 200 yuan. 2. Important notes: Drivers with less than one year of experience during the probationary period will be subject to stricter supervision. When driving on highways, they must be accompanied by a driver who has held a corresponding or higher-level license for at least 3 years.

7

5

Share

What are the reasons for crossing the line during parallel parking?

There are several reasons for crossing the line during parallel parking: 1. Entering too late: When reversing into the parking space too late, by the time the entire vehicle is inside, it's impossible to straighten, directly pressing against the right line. This is the most common cause of crossing the line. 2. Excessive speed: When reversing into the space, if the speed is too fast and the vehicle isn't straightened in time, the rear wheels may press against the rear line or the vehicle body may touch the line. 3. Ignoring distance: When exiting the space, the driver may focus only on adjusting the front of the vehicle and neglect checking the distance between the right wheel and the edge line in the right mirror. Due to turning the steering wheel too quickly, the right wheel may cross the line when exiting. Before starting parallel parking, it's crucial to position the vehicle correctly, maintaining a distance of 30-50 cm between the right side of the vehicle and the edge line to avoid significant errors.

19

1

Share

What number should I call to report a car blocking the way?

Call 122 to report a car blocking the way. Here is relevant information: 1. 122 emergency service: The 122 emergency service platform is a traffic accident report hotline established by China's public security traffic management authorities. If your vehicle is blocked, you can call 122. 2. Community security: This applies only to car owners whose vehicles are parked within the community. Community security personnel usually have vehicle registration records for the community. If your car is blocked or your parking space is occupied, you can contact them. 3. Insurance company: In theory, car owners usually affix their insurance labels on the windshield. In this case, you can check which insurance company the vehicle belongs to and call them directly.

15

3

Share

What does a bulb with an exclamation mark mean in a car?

Yellow bulb with an exclamation mark: This is the light fault indicator, indicating that there is a fault with one of the car's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. You can also check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. The exclamation mark is a common fault indicator in cars. Besides the yellow bulb with an exclamation mark, there are four other forms of exclamation marks: an exclamation mark inside a triangle, an exclamation mark inside a yellow gear, an exclamation mark inside a circle with brackets, and an exclamation mark with a horizontal line below brackets. Below is a detailed analysis: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating a problem with the transmission or low transmission fluid. Transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with brackets. This represents a brake system warning, indicating either a fault in the brake system or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire Pressure Anomaly: An exclamation mark with a horizontal line below brackets. This represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range.

1

4

Share

Can a Motorcycle Continue to Run After Water Intrusion?

Introduction to whether a motorcycle can continue to run after water intrusion: 1. First, check if the engine has taken in water. If the engine is waterlogged, it is essential to ensure all water is drained, and new engine oil is replaced before restarting. 2. If the engine is not waterlogged, the issue is usually caused by water entering the air filter or carburetor during shutdown, or water intrusion in the ignition system components such as the high-voltage coil, ignition unit, magneto, ignition switch, and their connecting plugs. Cleaning these components thoroughly should allow the motorcycle to start. Additional information on the consequences of water intrusion in motorcycles: 1. When a motorcycle is ridden through water, the main components prone to water intrusion are the fuel supply system and electrical control system, followed by the engine, ignition unit, generator, fuel tank, and other parts. Water entering the fuel supply system typically affects the carburetor and air filter. 2. Water entering the carburetor is mainly caused by water flowing down the throttle cable or a poorly sealed fuel tank cap, allowing water to leak into the fuel tank and mix with gasoline before reaching the carburetor. Particularly, if the sealing rubber sleeve at the carburetor's throttle cable port is aged or cracked, water can easily seep in. If damage is detected, it should be replaced as soon as possible.

2

0

Share

Which dashed line should the reversing alignment line align with for parking?

The reversing alignment line should align with the 3rd dashed line. Below is relevant information about parking: 1. "Non-character type" reverse parking: For "non-character type" reverse parking, the vehicle should be perpendicular to the target parking space. Using your vehicle's B-pillar as a reference point with the first parking space, you can generally reverse into the third parking space. 2. "Linear type" parallel parking: For "linear type" parallel parking, use the front vehicle as a reference, align the car body, turn the steering wheel right, and when the angle between the two vehicles reaches 45 degrees, observe and straighten the steering wheel while reversing. If estimated correctly, you can complete the parking in one maneuver.

12

2

Share

What are the methods to prevent tire blowouts?

How long after obtaining a driver's license can you drive?

What are the reasons for crossing the line during parallel parking?

What number should I call to report a car blocking the way?

What does a bulb with an exclamation mark mean in a car?

Can a Motorcycle Continue to Run After Water Intrusion?

Which dashed line should the reversing alignment line align with for parking?

How Long Does a Joint Venture Car Remain in Stock?

Is the Spare Tire Wheel Rim the Same as the Original One?

What is the passing score for Motorcycle License Theory Test (Subject 1)?

How Long Until New Energy Vehicles Are Scrapped?