What are the methods to prevent car tire blowouts?

What Tires Are Equipped on the Nissan Sylphy?

The Nissan Sylphy is equipped with Bridgestone tires. The tire size is 195/60R16. Bridgestone Corporation is a world-renowned tire manufacturer, ranking among the top in the global tire industry. When using the Nissan Sylphy's tires in daily driving, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallower. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may also pose a risk of blowouts at high speeds. Additionally, promptly remove pebbles lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may degrade rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool overheated tires. In hot weather or during high-speed driving, tires can overheat, and tire pressure may increase. In such cases, stop to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the road surface.

20

3

Share

What Lights Should Be Turned On in Rainy Weather?

When the rain is light, you should use the width indicator lights; when the rain is heavy, you should turn on the headlights or front fog lights. Also, avoid using hazard lights while driving and do not use the outline lights for extended periods. Relevant details are as follows: 1. Width Indicator Lights: The word 'width' in 'width indicator lights' literally means 'to indicate width,' serving as signal lights to alert other vehicles. 2. Front Fog Lights: Front fog lights are installed at the front of the car, usually in a bright yellow color and positioned slightly lower than the headlights. They are used to illuminate the road during rainy or foggy weather. Due to low visibility in foggy conditions, the driver's line of sight is limited. These lights can increase the driving distance, especially the strong light penetration of yellow anti-fog lights, enhancing visibility for the driver and other traffic participants, allowing oncoming vehicles and pedestrians to spot each other from a greater distance.

9

5

Share

Can Temporary License Plates Be Used Out of Province? Will There Be a Fine?

Only cross-jurisdiction temporary license plates can be used out of province. When applying for temporary plates, it is essential to choose the appropriate type based on your needs. If you plan to travel out of province, you must apply for cross-administrative jurisdiction temporary plates. If you are found using the wrong type of temporary license plate, according to Article 90, you will be fined 200 RMB and receive 12 penalty points. Below are the two types of temporary license plates: 1. Administrative jurisdiction temporary plates (sky blue background with black characters and black borders): These are for urban use only, and vehicles with such plates are not allowed to travel out of province. The validity period is 15 days. 2. Cross-administrative jurisdiction temporary plates (brown-yellow background with black characters and black borders): These are national temporary plates, and only vehicles with such plates can travel out of province. The validity period is 30 days.

19

3

Share

How to Distinguish the Number of Axles on a Truck?

The method to distinguish the number of axles on a truck is to count the rows of wheels from front to back; the number of rows equals the number of axles. Here is additional information: 1. Reason for multiple axles: Trucks have a higher load capacity and self-weight compared to regular vehicles, hence they require more axles to comply with the permissible axle load and weight per meter restrictions on roads. 2. Classification: (1) Large trucks typically have more axles, also referred to as axles or bridges, categorized as single-axle or double-axle; (2) Based on the number of axles, they can also be classified as front-four-rear-eight or front-four-rear-four. 3. Function: The axle's role is to bear the vehicle's load and ensure normal operation on the road.

13

1

Share

How Long Does It Take to Check Temporary License Plate Violations?

Temporary license plate violation inquiries generally take 3 to 7 days after the violation occurs, with the latest being no more than 13 working days. Below is some relevant additional information: 1. Application Conditions: The use of temporary license plates is time-limited and region-specific. You can apply for a temporary license plate at the local vehicle management office if you meet one of the following conditions: When driving a vehicle from the place of purchase to the place of use, you need to apply for a temporary license plate at the vehicle management office where the vehicle was purchased; When transferring vehicle registration and the official license plate has been surrendered, you need to apply for a temporary license plate at the local vehicle management office to drive back to your locality; For a new vehicle in the local area that has not yet obtained an official license plate and needs to be driven to another location for modifications, you must apply for a temporary license plate locally, and after modifications are completed, apply for a temporary license plate at the modification location to drive back to the original area; When purchasing a vehicle locally and needing to drive it to another location, you must apply for a temporary license plate locally to drive to the other location; When the vehicle's registration is not yet fixed and temporary use is required. 2. Application Procedures: When applying for a temporary license plate, you must fill out the 'Temporary Driving Vehicle Registration Form' as required and submit the following documents: Identification proof of the vehicle owner and agent; Proof of vehicle origin; For domestically manufactured vehicles, the whole vehicle factory certificate, and for imported vehicles, the import certificate; Vehicle identification number (frame number) and engine number rubbing.

14

0

Share

How to Open the Battery Positive Terminal Cover?

The method to open the battery positive terminal cover is as follows: 1. Prepare the necessary tools and observe the structure of the positive terminal cover to determine whether it is a standalone cover or integrated with the fuse box. 2. Insert a suitable flat-head screwdriver into the cover and gently pry it upward, noting the position of the fixing pin. 3. Insert the flat-head screwdriver into the battery cover, locate the fixing pin, and simultaneously pry upward to remove the positive terminal cover. If performing this in winter, be prepared to replace the cover if damaged, as plastic components become brittle and more prone to breakage in cold temperatures.

7

0

Share

What are the methods to prevent car tire blowouts?

What Tires Are Equipped on the Nissan Sylphy?

What Lights Should Be Turned On in Rainy Weather?

Can Temporary License Plates Be Used Out of Province? Will There Be a Fine?

How to Distinguish the Number of Axles on a Truck?

How Long Does It Take to Check Temporary License Plate Violations?

How to Open the Battery Positive Terminal Cover?

Where is the first-class seat adjustment button located?

Can only one person's name be registered when buying a car?

What are the differences between bicycles and e-bikes?

What is the solution case for fault code P0340?