What are the methods to deal with aging and cracking of the center console?

How Many Kilometers Between Brake Maintenance?

Brake maintenance is typically performed every 20,000 kilometers, but if the brakes are used infrequently, maintenance can be extended to every 30,000 to 40,000 kilometers. The conditions for brake maintenance are as follows: 1. Based on brake pad wear: If the brake pads have worn down to one-third of their original thickness, it's time to replace them. 2. Brake fluid replacement: Brake fluid, like other lubricants, has an expiration date and needs to be replaced periodically. Information about automotive brakes is as follows: 1. Brakes: As the name suggests, they are mechanical braking devices that can slow down a vehicle, also known as decelerators. 2. Method: The car's brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake pads on the brake drum, which then clamp the brake rotor, slowing or stopping the vehicle.

17

5

Share

How to Remove Carbon Deposits from a Car Engine?

Common methods for removing carbon deposits are as follows: 1. Using a cleaning solution: Cut off the fuel supply and connect the carbon cleaning agent to the engine injector. The cleaning agent softens the carbon deposits inside the engine, allowing them to be burned and expelled. However, this method is only suitable for mild carbon buildup and is not very effective for vehicles with severe carbon deposits. 2. Disassembling and cleaning the engine intake manifold: Remove the engine intake manifold, scrape off stubborn carbon deposits, clean it, and then reassemble it. This method yields the best and most noticeable results. 3. Driving long distances or on highways: Vehicles in a warmed-up state hardly produce any carbon deposit buildup. Additionally, the high-speed operation of the engine can expel some carbon deposits. Therefore, cars that frequently drive on highways are more fuel-efficient and easier to drive.

20

0

Share

What is the role of lanthanum-doped zinc oxide in tires?

Lanthanum-doped zinc oxide acts as a promoter and auxiliary agent in tires. The following is an introduction to zinc oxide and its role in tires: Introduction to zinc oxide: It serves as a reinforcing agent, activator, and vulcanizing agent for natural rubber and synthetic rubber, as well as a colorant and filler for white rubber compounds. Adding active zinc oxide to rubber compounds can enhance the rubber's wear resistance, tear resistance, and elasticity. Role of zinc oxide in tires: Zinc oxide is primarily used as a vulcanization activator in rubber, improving the crosslinking density of rubber to ensure optimal physical and mechanical properties. Zinc oxide also acts as a crosslinking agent for chloroprene rubber. As a new functional material, nano zinc oxide possesses unique properties and applications in magnetism, optics, electricity, antibacterial sterilization, and UV shielding that ordinary zinc oxide products lack. It can impart new characteristics to rubber products, such as high-speed wear resistance, electrostatic shielding, sunlight aging resistance, luminescence storage, and antibacterial properties, enabling the production of high-performance rubber and related products.

14

3

Share

What does the physical examination for driver's license renewal include?

The physical examination items for driver's license renewal mainly include the following: 1. Height: Applicants for large buses, tractors, city buses, large trucks, or trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. 2. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or streetcars must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, the requirement is at least 4.9. 3. Color vision: No red-green color blindness. 4. Hearing: Able to discern the direction of sound with each ear at a distance of 50 cm from the tuning fork. 5. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement function. 6. Lower limbs: Normal movement function. For manual transmission vehicles, the difference in lower limb length should not exceed 5 cm. For automatic transmission vehicles, the right lower limb must be intact. 7. Trunk and neck: No movement dysfunction.

7

5

Share

Will exceeding the second maintenance time void the warranty?

After the car reaches its second maintenance, exceeding the time limit is not a problem and will not void the warranty. Things to note for the second maintenance: 1. Go for maintenance on time: Even if the car hasn't been driven much and the mileage is insufficient, it's still necessary to go to the 4S shop for maintenance. This is because even if the car isn't driven, there will still be wear and tear. For example, engine oil, under the harsh conditions of high temperature and high pressure inside the engine, its shelf life will be significantly shortened, and its performance will greatly decline. Over time, it won't be able to protect the engine. Therefore, even if the car's mileage is low, it's still necessary to regularly change the engine oil and oil filter. 2. Not going to the 4S shop doesn't count as voiding the warranty: Since 2017, the "Regulations on the Administration of Motor Vehicle Maintenance" clearly stipulate that manufacturers and 4S shops cannot refuse to provide warranty services for vehicles on the grounds that maintenance was not performed at an officially authorized shop. This means car owners are free to choose where to have their cars repaired. Except for automobile manufacturers fulfilling their responsibilities for defective automobile product recalls and the "three guarantees" for automobile quality, no unit or individual may force or covertly force the designation of a maintenance operator.

4

Share

Will I be fined if my driver's license expires and needs renewal?

No fine, you can renew it normally. Whether a new license can be issued after expiration depends on the specific situation: Less than one year: If the expiration period is less than one year, you can renew the license normally. Between one and three years: If the expiration period is between one and three years, the license will be revoked, but you can renew it by passing the subject one test. More than three years: If the expiration period exceeds three years, the license will be invalid and cannot be renewed. The age requirements for applying for a motor vehicle driver's license are: Between 18 and 70 years old for small cars, small automatic transmission cars, and light motorcycles. Between 18 and 60 years old for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery. Between 21 and 50 years old for city buses, medium-sized buses, large trucks, trolleybuses, or trams.

13

2

Share

What are the methods to deal with aging and cracking of the center console?

How Many Kilometers Between Brake Maintenance?

How to Remove Carbon Deposits from a Car Engine?

What is the role of lanthanum-doped zinc oxide in tires?

What does the physical examination for driver's license renewal include?

Will exceeding the second maintenance time void the warranty?

Will I be fined if my driver's license expires and needs renewal?

Why Does the Tire Pressure Warning Light Stay On When Tire Pressure is Normal?

How to start a motorcycle if the ignition switch is broken?

How to Deal with BMW X6 Key Remote Not Unlocking the Door?

How Do Bus Drivers Ensure Driving Safety?