What are the methods for testing automotive oxygen sensors?

1 Answers
MacRiver
07/29/25 9:14am
Automotive oxygen sensor testing methods are as follows: 1. Consult the vehicle circuit diagram: Based on the circuit diagram, identify the wire colors corresponding to the oxygen sensor for the specific vehicle model to facilitate on-vehicle measurements, using a four-wire oxygen sensor as an example here. 2. Measure the oxygen sensor heating power supply wire: The heating power supply wire provides 12V. Unplug the sensor connector on the vehicle and measure whether there is a 12V power supply in the wiring harness. If present, it indicates the wiring harness is normal. 3. Measure the oxygen sensor heating control wire: The heating control wire is controlled by the vehicle's computer module, and the actual measured voltage is approximately 5V.
Was this review help?
9
2
Share
More Forum Discussions

How is the crash beam of Changan CS75?

Changan CS75's crash beam is very safe. Here are the specific details about Changan CS75: 1. Exterior: The large horizontal grille incorporates Eastern aesthetic design concepts, complemented by exquisite chrome grille lines, seamlessly integrating with the vehicle. The large-sized wheel design combines strength and beauty, highlighting the quality of the CS75 and reflecting attention to detail. 2. Powertrain: The Blue Core 1.5TGDI direct-injection turbocharged engine delivers enhanced performance, with a maximum power of 131KW and a maximum torque of 265N·m.
9
5
Share

Will a submerged car that doesn't start affect the engine?

If the vehicle is in a static state, meaning it's parked and submerged in water, and the engine hasn't been started, water will not harm the engine as long as it doesn't reach the air intake of the engine's intake system. Concept: An engine (Engine) is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. Classification: Internal combustion engines, external combustion engines (where fuel burns outside the engine), gas turbines, and jet engines.
17
4
Share

How many kilometers should Volkswagen Bora tires be replaced?

Volkswagen Bora tires generally need to be replaced every 60,000 to 80,000 kilometers. Here are some precautions to extend the service life of tires: 1. Pay attention to daily tire maintenance. Regularly check whether the tires are punctured, scratched, or have bulges caused by broken wires. 2. Regularly check tire pressure. Frequently inspect the tire pressure and measure it every month, replenishing as needed. Before driving on highways, it's especially important to check the tire pressure to ensure it's within the normal range. 3. Develop good driving habits. Try to avoid sudden starts, hard braking, and fast cornering, as these actions can accelerate tire wear and increase instantaneous pressure. Avoid running over hard objects on the road and control your speed.
5
2
Share

What to Do When All Vehicle Lights Suddenly Go Out During Night Driving?

When all vehicle lights suddenly go out during night driving, you should immediately pull over to the side of the road. Here are the reasons why emergency braking should be avoided: 1. Poor visibility: Drivers often experience poor visibility during night driving. At night, drivers primarily rely on vehicle lights to obtain information for safe driving. If all the lights on a vehicle go out, it becomes difficult for other drivers to discern the vehicle's movement patterns. 2. Increased risk of rear-end collisions: Other drivers may find it challenging to judge the speed and distance of the vehicle. Emergency braking in such situations can easily lead to rear-end collisions or side-swipe accidents.
19
0
Share

How Long Can a Car Cover Last?

Car covers generally last 2-3 years. Quality of the car film: Using low-quality car films, which are of poor quality, can easily lead to bubbles and wrinkles, and are prone to delamination. Once delaminated, hollow bubbles will appear. The quality of the car film is a crucial factor in determining the effectiveness of the car cover. Lifespan: The lifespan of an invisible car cover is 5 to 10 years. Many car owners choose to apply an invisible car cover to protect the original paint. Currently, there are three popular materials used for invisible car covers on the market: PVC, TPH (a softened version of PVC), and TPU. With proper maintenance, it can last for a long time.
15
2
Share

Will the car alarm sound if the Passat's front hood is left open when locking the car?

If the Passat's front hood is left open, there will be no reminder when locking the car. Owners should ensure the front hood is closed before locking the vehicle. Properly closing the front hood: An improperly closed engine hood may suddenly open while driving, obstructing the forward view and potentially causing accidents and injuries. Checking if the hood is properly closed: After closing the hood, check to ensure it is securely shut. A properly closed hood should be flush with the adjacent body panels. Ensure no one is within the hood's range when closing it. If you notice the hood is not securely closed while driving, stop immediately, close the hood properly, and take precautions to prevent accidents.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.