What are the methods for testing automotive engine power?

1 Answers
McThomas
07/30/25 6:37am
There are two main methods for testing automotive engine power: 1. Steady-state power testing (load testing or external load testing): Steady-state power testing refers to a method of measuring engine power on a dynamometer when the throttle opening, engine speed, and other parameters remain constant in a stable state. 2. Dynamic power testing (no-load testing or external load-free testing): Dynamic power testing refers to a method of measuring engine power when parameters such as throttle opening and engine speed are in a changing state. According to the power testing principle, dynamic power testing can be divided into two categories: (1) Measuring instantaneous power by determining instantaneous angular acceleration, which is an instrument solution that obtains instantaneous power by measuring the acceleration at a certain speed during the acceleration process. (2) Measuring average power by determining acceleration time, which is a solution that obtains average acceleration power by measuring the acceleration time within a certain speed range during the acceleration process.
Was this review help?
5
3
Share
More Forum Discussions

How to Solve the Problem of Loud Engine Noise During Rapid Acceleration?

Solutions for loud engine noise during rapid acceleration include: 1. Paste heat insulation and sound-absorbing cotton as well as damping plates on the engine cover, and install heat insulation and sound-absorbing cotton and damping plates inside the cabin; 2. Apply soundproofing cotton inside the car trim panels to reduce resonance caused by thin metal sheets during driving, minimize loosening of the trim panels, and decrease metal fatigue and noise generated during twisting; 3. Attach sound-absorbing cotton to the door trim components, install door damping materials, and use sealing materials to enhance sealing, reduce resonance noise, and lower wind noise during high-speed driving; 4. Paste damping plates and sound-absorbing cotton on the front and rear wheel fenders to minimize abnormal sounds transmitted by the shock absorbers during driving and suppress impact noise from tires and road surfaces as well as metal sheets; 5. Apply a layer of heat insulation and soundproofing cotton on the cabin ceiling to effectively block intense sunlight, prevent a rapid rise in cabin temperature, and reduce resonance noise from the roof steel plate vibration.
19
5
Share

How Many Days After Car Painting Can You Wash the Car?

Car painting can wash the car time needs to be divided into situations: 1. Vehicles painted in the paint booth can be washed immediately after coming out; 2. For vehicles painted at 4S shops, they can be washed when the staff delivers the vehicle, just inform the car wash staff to be careful; 3. If the car is painted and picked up on the same day, you can wash it after 2 days; 4. If the vehicle maintains sufficient ventilation and humidity, it can be washed after 6 to 7 hours; 5. If the paint has dried, you can wash the car 2 days after the paint dries. Washing the car is not only to make it clean, bright, and look like new, but its main purpose is maintenance, which means car washing is a basic task of car maintenance.
20
3
Share

Which button to press for one-key start in a car?

For one-key start in a car, press the ENGINE START/STOP button located on the panel below the right side of the steering wheel. The one-key start is a component installed in smart vehicles, serving as a simplified button device for both ignition and engine shut-off. This system can be retrofitted either at the original key lock position or as an independent panel. The functions of one-key start include: 1. Intelligent door control - automatically closes doors when starting the vehicle and opens them when turning off; 2. Protection of the vehicle's power supply system by promptly cutting off fuel and electrical circuits; 3. Anti-theft feature - if the smart key runs out of battery or gets lost, pressing the one-key start button and entering the original activation code can deactivate the anti-theft mode.
13
0
Share

What is the problem with car shaking at startup?

Vehicle shaking during startup is caused by irregular wear of the clutch, resulting in wobbling. During the engagement process, the clutch disc cannot smoothly engage but instead engages and disengages intermittently. This causes the engine power to begin transmitting and then suddenly slip, making the vehicle feel like it's hopping. It is recommended to first check the ignition system issues, remove the ignition coil to inspect whether the contacts are rusty, and ensure the screws are tightened. If rust is present, the poor conductivity may lead to frequent ignition failures, requiring the ECU to correct the frequency, which can cause engine shaking. Spark plugs should be replaced on time, with different materials having different mileage intervals.
18
4
Share

What does Audi TT Quattro mean?

Audi Quattro is a full-time four-wheel drive technology, with its core four-wheel drive technology being the Torsen center differential. This differential features a worm gear planetary gear structure and operates purely mechanically without the need for electronic system intervention. The Torsen center differential can more promptly adjust the torque distribution between the front and rear axles of the vehicle, allowing power to be output from the planetary gears to drive both the front and rear axles. The Audi Quattro was the first car to be equipped with the Quattro four-wheel drive system, hence the name Quattro. The Audi Quattro was developed based on the RS5 model, and its powertrain utilizes Audi's 2.5L 5-cylinder turbocharged engine, delivering an output of 408 horsepower and 480 Nm.
9
2
Share

What is the difference between a handbrake and an electronic parking brake?

The differences between a handbrake and an electronic parking brake are: 1. Different control methods: The handbrake controls the parking brake through a mechanical handbrake lever; the electronic parking brake controls the parking brake via an electronic button. 2. Different operations: The handbrake requires pulling the parking brake handle to control the parking brake; the electronic parking brake only requires pressing a button to control the parking brake. Precautions for using the handbrake: 1. Avoid pulling the handbrake to 100% full force; 2. Avoid parking on a slope with the handbrake engaged for extended periods; 3. Never engage the handbrake directly while driving at high speeds; 4. Engage the handbrake carefully in snowy and icy conditions or after washing the car in winter.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.