What are the methods for repairing scratches on the windshield?

1 Answers
NoahMarie
07/24/25 2:36am
Methods for repairing scratches on the windshield: 1. Glass scratch repair agent: Slowly apply the gel along the glass crack. This method is only suitable for minor scratches. 2. Toothpaste application can repair small scratches: Apply a small amount of toothpaste to the scratched area, wipe with a soft cloth, and then rinse with water. 3. If the scratch area is large, it is recommended that the owner seek professional repair. In daily life, car owners should perform regular maintenance on the car windows. Daily maintenance methods include: 1. Proper use of windshield washer fluid. Market-available windshield washer fluids are divided into summer windshield washer fluid, winter antifreeze windshield washer fluid, and special-effect antifreeze windshield washer fluid. 2. Do not use other detergents as substitutes for windshield washer fluid. The sediment in other detergents can corrode rubber pipes and clog spray nozzles over time, and in severe cases, damage the motor. 3. If the owner does not use the car for a long time, a glass cover can be used to protect the windshield.
Was this review help?
5
5
Share
More Forum Discussions

How many liters of engine oil are needed for a Bora oil change?

The 1.6L Volkswagen Bora requires 3 liters of engine oil, while the 2.0L version needs 3.5 liters. Engine Oil Introduction: Engine oil, also known as engine lubricant, serves multiple functions including lubrication and friction reduction, auxiliary cooling, sealing against leaks, rust and corrosion prevention, as well as shock absorption. Precautions for Engine Oil Usage: Engine oil selection should be based on the engine's requirements, choosing oil that matches the engine specifications. Multi-grade oil is recommended due to its advantages in fuel economy, extended service life, and high efficiency, providing better engine protection. The oil level should be slightly below the mark on the dipstick, avoiding overfilling.
18
1
Share

Why does the Elantra make abnormal noise and shake when braking in D gear?

Abnormal noise and shaking when braking in D gear on the Elantra may be caused by excessive carbon deposits in the engine or a mismatch between the engine oil quality and the engine. Specific reasons: Excessive carbon deposits in the engine. This situation mainly occurs when gasoline is not fully absorbed into the engine, leading to the formation of carbon deposits, which causes the car to shake and increases fuel consumption. Once the engine oil viscosity is too high, it can lead to increased fuel consumption and carbon deposit formation. Solutions: Check the car's spark plugs. If a certain cylinder's spark plug cannot ignite normally, it will cause the engine to run unevenly. At this time, the vibration at idle speed will be very noticeable, and it will also be accompanied by a decrease in power. You can go to a 4S shop to find relevant professionals for maintenance.
2
5
Share

Where is the air conditioning drain pipe located on the Audi Q3?

The air conditioning drain pipe of Audi vehicles is located directly beneath the evaporator unit of the car. Function of the air conditioning drain pipe: Primarily serves as an air conditioning drainage device, enabling timely water discharge to ensure normal operation of the air conditioning system. The drain pipe also functions to discharge water when the vehicle is stationary. While it may seem that the car is a relatively enclosed environment, this isn't due to superior airtightness but rather the well-designed drainage holes. Air conditioning system maintenance: The cabin air filter should be replaced regularly. Generally, replacement is needed when driving under urban road conditions. This not only keeps the intake system cleaner but also prevents reduced cooling efficiency caused by a clogged air filter. During summer, when there's a significant temperature difference between the interior and exterior of the vehicle, it's advisable not to immediately set the air conditioning to the lowest temperature upon entering the car.
13
5
Share

What are the hazards of low gear and high RPM?

The hazards of low gear and high RPM: 1. Wastes gasoline; 2. Fails to fully utilize the kinetic energy of the car, causing the engine to run at high speed while the gearbox operates in low gear. Suddenly shifting a high-speed car into low gear will make the car's operation drive the engine, resulting in changes in sound, which is not advisable during operation; 3. Long-term low gear and high RPM can cause a large amount of carbon deposits. The hazards of high gear and low RPM: 1. Driving in high gear and low RPM makes it difficult to utilize the engine's full power and may even damage the vehicle's power system; 2. When the engine operates in high gear and low RPM, the engine output is weak with low torque; 3. Low RPM operation makes it difficult to achieve the engine's self-cleaning effect, easily causing carbon deposits in the engine and fuel system.
8
0
Share

What brand is JTR?

GTR is a sports car under Nissan, known for its exceptional performance and has a large fan base in China. Here are some related details: 1. GTR: Nissan GTR refers to the high-performance, high-reliability, high-power sports car produced by Nissan. After years of evolution and improvement, the GTR model emerged from Nissan's Skyline sedan series, becoming the highest version of the series and highly sought after by countless fans. 2. Specifications: The GTR is equipped with a 3.8-liter twin-turbocharged V6 engine, coded VR38DETT, with a maximum power of 408 kW, a maximum torque of 632 Nm, a maximum power speed of 6800 rpm, and a maximum torque speed ranging from 3300 to 5800 rpm. This engine is paired with a 6-speed dual-clutch transmission.
12
2
Share

Will the Model 3 chassis be damaged if it is hit?

If there is no problem with the car, there is no need to worry. When the car is designed, the chassis has a certain ability to resist impact. Drive the car to a maintenance point and carefully check the chassis. If the pipes are not damaged and only the steel plate is scratched, just add a little paint to prevent rust. The following is a specific explanation of whether there is a problem if the Model 3 chassis is hit: 1. No problem: If the car chassis is hit, as long as the speed is not fast when it is hit and the sound of the scratch is not loud, the problem will not be serious, and there will basically be no problem. 2. Problematic situation: If there is a loud "bang", it is very likely that the oil pan will be dented or even pierced, which will cause problems.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.