What are the methods for adjusting car high beam headlights?

1 Answers
VanWeston
07/29/25 5:48pm
There are manual adjustment and automatic adjustment for car high beam headlights. The following are specific introductions to common high beam adjustment methods for cars: Manual adjustment: Using a sliding rheostat to achieve height adjustment of the motor. The driver can adjust the angle of the light beam through the light knob under the car dashboard according to the driving route conditions. Automatic adjustment: Through the input signal from the height position sensor, it is converted into a voltage signal by an algorithm, and the headlight control module drives the motor to control the adjustment of the headlights. There are corresponding sensors inside the car, which can automatically detect the dynamic balance condition of the car during driving.
Was this review help?
18
3
Share
More Forum Discussions

What does the OBD inspection in vehicle annual inspection mean?

Vehicle annual inspection OBD inspection refers to the On-Board Diagnostics system, which continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If they do, the system will immediately issue a warning. When a fault occurs in the system, the malfunction indicator lamp or check engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. Through specific procedures, the fault code can be read from the PCM. Based on the fault code, maintenance personnel can quickly and accurately determine the nature of the fault. If the OBD light is on, it indicates poor combustion conditions in the vehicle, leading to excessive emissions. When the OBD light is on, the vehicle needs to be inspected and repaired at a 4S shop, as general car owners cannot diagnose the cause of the fault themselves.
16
5
Share

Can the new X-Trail directly replace LED lights?

The new X-Trail can directly replace LED lights. Automotive LED lights primarily serve lighting and signaling purposes, illuminating the road ahead of the vehicle to ensure safe driving at night. Currently, based on the light source, they can be mainly categorized into halogen lamps and xenon lamps. The new X-Trail is a compact 5-door, 5-seat SUV with dimensions of 4675mm in length, 1820mm in width, and 1722mm in height, and a wheelbase of 2706mm. It is equipped with a 2.0L engine, delivering a maximum power of 111 kilowatts and a maximum torque of 194 Newton-meters. The vehicle features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension utilizing a multi-link independent suspension.
7
2
Share

How to Automatically Fold the Rearview Mirrors on the Volkswagen T-Cross?

Method for automatically folding the rearview mirrors on the Volkswagen T-Cross: The rearview mirror control knob is located on the door armrest. Rotate the knob to the folding symbol position, and the mirrors will automatically retract. Note that you must first turn the knob to the left or right rearview mirror button before you can fully adjust the desired mirror. Below is an introduction to the functions of the power-folding rearview mirrors: 1. Avoid scratches on the mirrors. As the widest component installed on the vehicle, rearview mirrors are most susceptible to impact in case of a side collision. The power-folding feature helps prevent scratches on the mirrors. 2. Improve vehicle passability. Foldable rearview mirrors can be retracted when passing through narrow sections, enhancing the vehicle's passability. 3. Protect the mirror surface. The power-folding function allows the mirrors to be folded after the owner leaves the car, protecting the mirror surface.
7
4
Share

What are the differences between DEF motorcycle licenses?

The differences between DEF motorcycle licenses lie in the types of vehicles they authorize. Specifically, D is the license for ordinary three-wheeled motorcycles, E is for ordinary two-wheeled motorcycles, and F is for light motorcycles. Among these, D is the highest level of motorcycle license, allowing the holder to operate vehicles covered by E and F licenses, while E permits the operation of vehicles covered by F (i.e., D > E > F). Classification of motorcycle license types: Ordinary three-wheeled motorcycle: A three-wheeled motorcycle with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h. Ordinary two-wheeled motorcycle: A two-wheeled motorcycle with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h. Light motorcycle: A motorcycle with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less. Required documents for applying for a motorcycle license: Original and photocopy of valid ID, one-inch bareheaded photo, completed motorcycle license application form with payment, medical examination at a qualified hospital or self-service photo booth, and submission of these four documents to the examination center. For those applying for an additional motorcycle license, the original driver's license must also be provided. Motorcycle license test: Subject 1: Theoretical test (road safety laws and regulations). Similar to the C1 license theoretical test, candidates can prepare using apps like "Driving Test Treasure" or "Driving School One Pass." The test consists of 50 randomly selected questions, each worth 2 points, with a passing score of 90 out of 100. Subject 2 (Field driving skills): The test includes three main components: pole test, single-plank bridge, and slope parking and starting, with a passing score of 80. Subject 3: Road driving skills: Starting, driving straight, passing through crosswalks, making U-turns, and parking by the roadside, with a passing score of 90. Safe and civilized driving knowledge: Consists of 50 questions presented as text, images, or videos, including true/false, single-choice, and multiple-choice questions. Each question is worth 2 points, with a passing score of 90 out of 100. Motorcycle test Subjects 2 and 3 comprehensive evaluation criteria: Criteria for failing the test: Failing to follow the prescribed route sequence. Touching or scraping the poles. Vehicle body crossing the line. Stopping twice during the test where stopping is not allowed. Engine stalling. Failing to use seat belts or wear a helmet as required. Failing to follow traffic lights, signs, markings, or police signals. Exceeding the speed limit. Vehicle rolling back more than 30cm when starting. Poor control of vehicle direction. Both hands leaving the handlebars while driving. Inability to control direction effectively with one hand on the handlebars. Coasting in neutral while driving. Looking away from the direction of travel for more than 2 seconds. Failing to maintain a safe distance and speed while driving. Competing for the right of way, hindering other vehicles. Creating dangerous situations due to poor observation, judgment, or operation. Failing to follow the examiner's instructions. Violating traffic safety laws or regulations deemed unsafe by the examiner. Hands leaving the handlebars while driving. Two-wheeled motorcycle swaying or feet touching the ground while driving. Failing to use both front and rear brakes simultaneously when stopping. Age requirements for motorcycle license application: Light motorcycle: 18 to 70 years old. Ordinary three-wheeled or two-wheeled motorcycle: 18 to 60 years old. Conditions disqualifying applicants: Organic heart disease, epilepsy, Meniere's disease, vertigo, hysteria, Parkinson's disease, mental illness, dementia, or neurological diseases affecting limb movement. Drug use or injection within the past three years, or release from compulsory drug rehabilitation within the past three years, or long-term dependence on addictive psychotropic drugs. Hit-and-run resulting in criminal charges. Driving under the influence causing major accidents with criminal charges. Driving under the influence or drunk driving of commercial vehicles resulting in license revocation within the past five years. Drunk driving of commercial vehicles resulting in license revocation within the past ten years. License revocation for other reasons within the past two years. License cancellation within the past three years. Other conditions specified by laws or regulations. Test instructions: Candidates unable to attend the scheduled test must apply for cancellation one day in advance. Absence without cancellation results in a fail. Each subject allows one retake after a fail. Failing the retake terminates the test, requiring reapplication. Subject 3 can be rescheduled after ten days. Failing the safe driving knowledge test does not invalidate the passed road skills test. Consequences of unlicensed driving: Unlicensed driving incurs fines and possible detention. Article 99, Paragraph 2 of the Road Traffic Safety Law: Driving without a license, with a revoked license, or during suspension results in fines of 200–2000 RMB and up to 15 days detention. Insurance companies do not cover damages caused by unlicensed driving. Accidents caused by unlicensed drivers result in denied claims for compulsory and commercial insurance, with all losses borne by the driver. Even if insurers advance medical expenses, they retain the right to recover costs from the driver. Unlicensed driving increases the likelihood of traffic offense charges. Unlicensed drivers causing accidents with full or primary responsibility and serious injury to one person may face traffic offense charges, whereas licensed drivers require death or serious injury to three or more for similar charges. The same applies to hit-and-run offenses.
20
4
Share

Why is the display screen still on after the Changan CS75 is turned off?

Changan CS75's display screen remains on after turning off indicates that the start button was pressed twice, or the vehicle was turned off without shifting to P gear. Correct shutdown steps: 1. Step on the brake, stop the vehicle smoothly, shift the gear from D to N and tighten the handbrake; 2. Release the foot brake, but do not turn off the power, continue to step on the foot brake, shift the gear from N to P; 3. Release the foot brake, press the one-button start button, the power is turned off, and the shutdown is completed. The length, width and height of Changan CS75 are 4650mm, 1850mm and 1715mm respectively, the wheelbase is 2700mm, equipped with a 6-speed manual transmission, and the body type is a 5-door 5-seat SUV. The vehicle uses a 1.5T L4 turbocharged engine, the maximum torque of the engine is 265 Nm, and the driving method uses front-wheel drive.
20
2
Share

What are the differences between the e200 and e300?

The differences between the e200 and e300 are: 1. Different maximum engine power: The e200 has a maximum engine power of 135 kW; the e300 has a maximum engine power of 180 kW. 2. Different maximum engine torque: The e200 has a maximum engine torque of 300 Nm; the e300 has a maximum engine torque of 370 Nm. Both the e200 and e300 have the same length, width, and height of 5065mm, 1860mm, and 1476mm respectively, with a wheelbase of 3079mm. They are equipped with a 9-speed automatic transmission, reach a top speed of 235 km/h, and feature a 4-door, 5-seater sedan body type.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.