What are the measures for slight steering wheel wobble during straight-line driving?

2 Answers
VanCali
09/06/25 2:37am
Here are the relevant measures regarding slight steering wheel wobble during straight-line driving: 1. Steering wheel: While the vehicle is in motion, it is essential to promptly correct the direction by making slight adjustments to the steering wheel with gentle force. 2. Avoid staring straight ahead: Focus on a distant point on the road instead of fixating on the immediate path ahead, and refrain from letting your eyes wander. 3. Driving speed on bumpy roads: When encountering uneven road surfaces, remember to decelerate in advance, partially release the clutch while easing off the throttle, and allow the car to coast through at idle speed to minimize the sensation of bumps as much as possible.
Was this review help?
9
3
Share
JessicaLynn
09/18/25 2:42am
I remember once when driving straight, the steering wheel wobbled slightly, making the car feel unstable, as if driving on a gravel road. I checked the tires myself and found uneven tire pressure and irregular wear. I immediately went to the repair shop, where the mechanic said a wheel balance and alignment calibration were needed. The process was simple and took only half an hour, but the driving experience improved significantly afterward. If you encounter similar issues, don’t ignore them—it could also indicate suspension system problems or a worn-out driveshaft causing the wobble. Developing a habit of checking your vehicle's condition every six months can save you a lot of hassle and ensure a safe, comfortable drive.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What are the reasons why the clutch sometimes fails to return?

The reasons why the clutch sometimes fails to return: 1. The clutch fluid is dirty with impurities, causing severe wear of the internal piston of the clutch master cylinder or blockage of the return oil hole, preventing the clutch from returning to position; 2. As the vehicle mileage increases, the clutch return spring lacks sufficient elasticity or breaks, resulting in the clutch pedal not returning to position. The symptom is that the clutch pedal height decreases and the free play reduces or disappears; 3. Excessive wear gap of the clutch linkage push rod causes poor return. This type of fault requires replacement of the clutch master cylinder or linkage mechanism; 4. Air enters the clutch pipeline system, causing excessive clutch travel and poor return. For this type of fault, you can make a preliminary judgment yourself. If the first press of the clutch pedal feels resistance-free with excessive travel, and the pedal rises after repeated presses, it is mostly caused by air entering the hydraulic system. In this case, the cause of air ingress should be identified promptly and the air in the hydraulic system should be purged.
6
3
Share

What to Do When the Motorcycle Seat Lock Won't Open?

Motorcycle seat locks come in various types, and their installation and opening methods differ. Therefore, when a locked seat lock won't open, the approach to unlocking it also varies. Specific solutions are as follows: 1. Disassembly: This method requires a repair technician to remove the components around the seat lock based on the actual situation and then open the seat lock by pulling the lock cable or using leverage. If the seat lock or lock base itself is damaged, it may need to be disassembled or forcibly broken depending on the situation, followed by replacement with new parts. 2. Seek Professional Help: In such cases, it is almost impossible for a non-professional to open the lock themselves—otherwise, the seat lock would lose its anti-theft capability. It is recommended to visit an after-sales service or a motorcycle repair shop and let a professional mechanic assess and open the lock as needed.
3
0
Share

How much does the Benelli TNT 600 weigh?

The Benelli TNT 600 motorcycle weighs 440 jin (approximately 220 kg). Here are the specific details about the Benelli TNT 600: 1. Power: The TNT 600 is equipped with a 600ml, four-cylinder, water-cooled, DOHC 16-valve engine with a compression ratio of 11.5:1. It can produce a maximum power of 60kW at 12,000 rpm and a maximum torque of 55N·m, providing sufficient traction even at low speeds. The engine features a long-stroke design with a bore and stroke configuration of 65×45.2mm. 2. Vehicle positioning: The Benelli TNT 600 falls into the category of heavy motorcycles, with dimensions of 2120/800/1100mm and a wheelbase of 1480mm.
7
4
Share

How to Check Driver's License Revocation Status on Mobile Phone?

You can check traffic violation points and whether your driver's license has been revoked through the Traffic Management 12123 mobile app. Simply log in to the 12123 APP and click on 'Driver's License' in the upper left corner. Relevant information is as follows: 1. Platform Inquiry: Revoked driver's licenses can be checked by logging into the Comprehensive Traffic Safety Service Management Platform website before the restricted period for reapplying for a motor vehicle driver's license ends. 2. Revocation Due to Accidents: Those who have their driver's license permanently revoked due to drunk driving causing major traffic accidents constituting a crime, being held criminally responsible, or fleeing after causing a traffic accident can always check their status by logging into the Comprehensive Traffic Safety Service Management Platform website.
16
0
Share

What is the maximum power of a 125cc motorcycle in kW?

The maximum power of a 125cc motorcycle is 8.3kW. Below are specific details about motorcycle fuel consumption: 1. Average fuel consumption: Motorcycle engines of the same displacement can exhibit significant differences in average fuel consumption, influenced by factors such as model, technology, road conditions, and driving skills. Generally, the comprehensive fuel consumption for a 125cc motorcycle is around 2L per 100 kilometers, 150cc around 2.3L, 200cc around 2.5L, and 250cc around 3L. 2. Different stages: Fuel consumption tends to be higher during the break-in period. If the motorcycle is aggressively driven at high speeds during this period, fuel consumption may also be higher. Motorcycles used for over 6 years may have higher fuel consumption due to wear and increased component gaps.
15
1
Share

Should the AC in the car be turned on in winter?

In winter, the AC in the car should not be turned on. The AC is the air conditioning cooling switch, and the principles of warm air and cold air are different. Warm air only requires adjusting the air conditioning button and is generated by the heat dissipation from the engine. There is a small fan in the engine compartment that blows the heat collected by the cooling system into the car. If it rains or snows and the temperature difference between the inside and outside of the car is significant, the front windshield is prone to fogging up. At this time, do not turn on the AC button; simply adjust the warm air outlet direction to the setting that blows air onto the front windshield, and the fog can be easily removed in a few minutes. The car air conditioning is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue. It also creates good working conditions for the driver and plays an important role in ensuring safe driving as a ventilation device. It generally includes a cooling device, a heating device, and a ventilation device.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.