What are the maximum and minimum speed limits on a two-lane highway?

1 Answers
VanBriella
07/28/25 3:57pm
The basic speed limits on highways are a minimum of 60 km/h and a maximum of 120 km/h. Below are specific details about vehicle speed limits on highways: 1. Vehicle speed limit standards: The maximum speed for small passenger vehicles must not exceed 120 km/h, for other motor vehicles it must not exceed 100 km/h, and for motorcycles it must not exceed 80 km/h. The minimum speed must not be lower than 60 km/h. 2. Penalty standards: If the speed exceeds the limit by less than 10%, a warning will be issued. On roads with a speed limit below 50 km/h: (1) Exceeding the speed limit by 10% to less than 20% will result in a fine of 50 yuan. (2) Exceeding the speed limit by 20% to less than 50% will result in a fine of 100 yuan. (3) Exceeding the speed limit by 50% to less than 70% will result in a fine of 300 yuan. (4) Exceeding the speed limit by 70% will result in a fine of 500 yuan.
Was this review help?
5
2
Share
More Forum Discussions

What does a yellow exclamation mark on the car dashboard indicate?

When a yellow exclamation mark appears on the car dashboard, there are four possible scenarios: general malfunction, automatic transmission failure, abnormal tire pressure, or lighting system issues. Below is a detailed analysis of each situation: General Malfunction: A triangle with an exclamation mark inside indicates a general performance or component malfunction. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor issues. It is advisable to visit a 4S shop for diagnosis and repair to identify the source of the problem. Automatic Transmission Failure: A yellow gear with an exclamation mark inside is the automatic transmission warning light, indicating a transmission malfunction or low transmission fluid level. The transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark inside a horizontal line under a bracket represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting System Issues: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with brackets indicates a braking system warning, typically due to braking system failure or low brake fluid level. Immediate inspection and repair of the braking system are necessary to prevent accidents.
14
5
Share

How to Shift to Neutral in an Automatic Transmission?

Any forward gear can be shifted to Neutral (N) at any time, but shifting from Park (P) or Reverse (R) to Neutral requires pressing the brake first. The vehicle must be brought to a complete stop by pressing the brake before shifting from Neutral to any other gear. However, under special circumstances, Neutral can be shifted directly to a forward gear, though this may damage the transmission. Turn on the power (without starting the engine), press the brake, and shift gears. (First shift to Neutral, then start the engine, and then shift to Drive (D)). Release the parking brake, lift your foot off the brake, and start moving.
8
5
Share

Audi Q3 Parking Brake System Malfunction?

Audi Q3 parking brake system malfunction may be due to sensor failure or ABS pump failure! Go to a repair shop for computer diagnostics and repairs. Additional information about parking brake system malfunctions is as follows: 1. Fault indication: The electronic parking brake light keeps flashing, accompanied by "Automatic parking function failure". After parking and restarting, most vehicles no longer display this fault. 2. Three causes and related solutions: A socket on the switch bus is not properly seated. The parking brake sensor may have mud or water attached during rainy days or iron filings during the new car break-in period, leading to inaccurate detection. Most 4S shops explain this as an occasional fault code that can be cleared for normal operation.
8
5
Share

What are the differences between the high-end and standard configurations of the BMW X4?

BMW X4 high-end and standard configurations mainly differ in the vehicle's equipment. Standard configuration: The most recommended model of the all-new BMW X4 should be the entry-level 25i M Sport package. The overall configuration is quite complete, but it would be better if there were more comfort features, as it only includes some basic equipment. High-end configuration: Based on the standard equipment, the high-end configuration adds the M Off-Road appearance package, keyless entry, and HUD head-up display for the exterior and interior. In terms of safety and technology, it includes automatic parking, as well as power-folding mirrors and anti-glare function for the exterior rearview mirrors. The most noticeable interior upgrade, the full LCD instrument panel, is also equipped in the Off-Road package.
14
1
Share

Can 92 Gasoline Be Mixed with 95?

92 gasoline can be mixed with 95 if there is still some left in the tank. However, prolonged mixing is not recommended. While mixing the two grades does not cause significant harm to the car or the engine itself, the engine's compression ratio may not be high enough to fully utilize the properties of 95 gasoline, leading to "delayed combustion" and increased fuel consumption. Here is a related introduction to the differences between 92 and 95 gasoline: 1. Different contents of n-heptane and isooctane. The two fundamental components of gasoline are n-heptane and isooctane. Isooctane has strong anti-knock properties and acts as a stabilizer for gasoline, while n-heptane is highly flammable and acts as an accelerator. These two components interact, and the higher the isooctane content, the stronger the anti-knock performance of the gasoline. 92 gasoline has an octane rating of 92 and is suitable for mid-range cars (with relatively low compression ratios), while 95 gasoline has an octane rating of 95 and contains 3% n-heptane. 2. Higher octane ratings indicate stronger anti-knock performance. The grade of gasoline is an indicator of its anti-knock performance and is not directly related to cleanliness, power, or combustion value. The higher the gasoline grade, the better its ability to resist engine knocking. The main difference between 92 and 95 gasoline is that 95 has stronger anti-knock properties than 92.
18
5
Share

What does a yellow exclamation mark on the dashboard indicate?

There are four possible scenarios when a yellow exclamation mark appears on the car dashboard: general malfunction, automatic transmission failure, abnormal tire pressure, and lighting system failure. Below is a detailed analysis of these four situations: General Malfunction: A triangle with an exclamation mark inside indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the problem. Automatic Transmission Failure: A yellow gear with an exclamation mark inside is the automatic transmission warning light, indicating a transmission malfunction or low transmission fluid level. The transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark inside a horizontal line under a bracket represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting System Failure: A yellow bulb with an exclamation mark is the lighting failure indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with brackets indicates a brake system warning, which may be due to brake system failure or low brake fluid level. Immediate inspection of the brake system is necessary to prevent accidents.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.