What are the materials required for annual inspection?

1 Answers
LeMiles
07/29/25 10:41pm
Materials required for vehicle annual inspection: vehicle license; both original and duplicate copies; valid compulsory traffic insurance policy; vehicle and vessel tax payment receipt; ID card and photocopy of ID card. Below is relevant information about the annual inspection: 1. Purpose of the annual inspection: The purpose of the annual inspection is to determine the technical condition and operational capability of the vehicle, identify the location and cause of any faults. Only after passing the annual inspection can the vehicle continue to operate or undergo repairs. 2. Notes for the annual inspection: Do not alter the vehicle's appearance or tire size. The actual vehicle must match the photo on the driving license. If the vehicle's appearance has changed, it may fail the annual inspection.
Was this review help?
18
4
Share
More Forum Discussions

Should You Use Hot or Cold Air to Defog in Summer?

Both warm air and cold air can be used to defog a car. The differences and precautions between using cold air and warm air for defogging are as follows: Differences between the two: Using warm air to blow the windshield is more effective than using cold air because it essentially dries the water vapor, eliminating concerns about fogging up again. However, warm air defogging is slower than cold air defogging, and the fog may initially worsen when first turned on, requiring a few minutes of patience. If you want to quickly remove fog from the windshield, use cold air. Precautions for warm air defogging: In winter, using warm air for defogging is more comfortable. Although warm air takes longer to defog than cold air, it prevents the windshield from fogging up again. When the driver turns on warm air for defogging, the fog on the windshield may initially increase—don’t panic. After a short wait, the warm air will dry the fog.
8
4
Share

Is it necessary to shift to neutral when parking?

It is necessary to shift to neutral when parking. Below is an introduction regarding gear shifting when parking: Reasons for shifting gears: For vehicles equipped with an engine start-stop function, when waiting at a red light, the engine will enter a shutdown state, meaning there is no idle state that generates impact force. Therefore, there is naturally no need to shift to neutral, eliminating the hassle of frequently switching the transmission. Engine start-stop: The working principle of the engine start-stop is very simple. As long as the brake is firmly pressed or the vehicle remains stationary, the vehicle's engine will temporarily stop working, entering a shutdown state. When the driver releases the brake, the engine will re-enter the working state, allowing the vehicle to continue moving forward.
19
2
Share

The Simplest Cleaning Method for Yellowing Car Headlights?

You can use soapy water for cleaning. Below is a detailed introduction on how to deal with yellowing car headlights: Cleaning with soapy water: Directly wiping with soapy water can provide excellent cleaning results. However, it's important to note that you should never use laundry detergent water, as laundry detergent is corrosive, whereas soap is alkaline and won't corrode the headlight cover. After cleaning, apply polishing wax to enhance cleanliness. The advantage of this method is its simplicity and convenience. Polishing: This is a crucial step that requires patience and thoroughness. Soak a piece of 1000-grit sandpaper in cold water for 10 minutes, then evenly wipe the headlight housing. Sand in a back-and-forth motion in one direction, keeping the surface wet at all times. Apply moderate pressure to avoid damaging the surrounding paint or decorative strips. Continue until all pits or scratches are smoothed out. Wipe the surface gently with a towel to check for evenness, then dry the surface thoroughly upon completion.
20
1
Share

How is the GS4235T engine?

GS4235T is equipped with the Trumpchi Ti-POWER powertrain, with a maximum power output of 112 kW and peak torque of 235 Nm. Below are the specific details of the Trumpchi GS4: Vehicle Positioning: The Trumpchi GS4 is a compact SUV under GAC Motor. Configuration: The 235T model is paired with a 6-speed automatic transmission and four-wheel drive system, featuring a plug-in hybrid system composed of a 1.5L Atkinson cycle engine and G-MC electric coupling system. Fuel Consumption: The gasoline version of the GS4 has a fuel consumption of 6.8 liters per 100 km, while the hybrid version reduces it to as low as 4.6 liters per 100 km. The parts commonality rate reaches 50%, and it is also equipped with the ADiGO smart connectivity system and autonomous driving system.
5
0
Share

Who Invented the Car?

The world generally recognizes the inventor of the car as the German, Karl Friedrich Benz. In 1885, German engineer Karl Benz manufactured the first car in Mannheim. This vehicle was a three-wheeler, equipped with a two-stroke single-cylinder 0.9 horsepower gasoline engine, featuring the basic characteristics of modern automobiles. Karl Benz himself was one of the founders of Mercedes-Benz. More information about automobile manufacturing is as follows: 1. The French hold a different view on who invented the car. 2. The French believe that as early as before the Germans, Frenchman Delamare-Deboutteville invented the car and applied for a patent in 1884, which is indeed a fact. Unfortunately, he did not continue to research cars afterward but instead applied the engine to industrial production, eventually becoming an industrial engine manufacturer, distancing himself from the automobile industry.
7
1
Share

What is the correct way to handle sudden loss of vehicle control?

The correct way to handle sudden loss of vehicle control is as follows: 1. Apply the brakes, turn on the hazard warning lights to alert nearby vehicles of the danger. 2. If safe to do so, set up a warning triangle behind the vehicle, immediately call for roadside assistance, and wait for a tow truck. 3. During normal driving, if the driver notices unresponsive steering, the correct action is to slow down as quickly as possible, stop at a safe location, and identify the cause. 4. For vehicles equipped with power steering, if the driver suddenly experiences difficulty steering with increased effort, they should slow down promptly, choose a safe place to stop, and investigate the cause. 5. After losing steering control, if the vehicle deviates from a straight path, firmly and repeatedly press and release the brake pedal to bring the vehicle to a stop as quickly as possible.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.