What are the major maintenance items for the Magotan at 60,000 kilometers?

1 Answers
Myrtle
07/29/25 6:48pm
Replace engine oil and oil filter, replace fuel filter, replace cabin air filter, replace engine air filter, replace brake fluid, replace transmission fluid, replace spark plugs. Here is more information about maintenance: 1. Maintenance intervals: First service at 5,000 kilometers, then every 10,000 kilometers thereafter. Brake fluid should be replaced every 2 years. 2. Purpose of maintenance: To ensure your vehicle always operates in optimal condition, eliminate potential hazards in advance, prevent malfunctions, slow down the deterioration process, maintain a clean appearance, extend the vehicle's service life, and reduce maintenance costs.
Was this review help?
17
1
Share
More Forum Discussions

What are the techniques for coasting in neutral with an automatic transmission?

Cars equipped with automatic transmissions should not coast in neutral, and there are no techniques to speak of. The reasons why coasting in neutral is not recommended are as follows: 1. When a car is coasting in neutral, the connection between the engine and the drive wheels is disconnected, and the car moves forward solely by inertia. In emergency situations requiring braking, all braking force must be provided by the brakes alone. When coasting with the transmission engaged, the engine itself provides some resistance, which, combined with the brakes, shortens the braking distance. Additionally, coasting in neutral can cause the car to stall easily, leading to brake booster failure and reduced braking performance, increasing the risk of rear-end collisions. 2. If neutral coasting is chosen, the car's computer will put the engine into idle mode, and fuel injection will continue. Therefore, coasting in neutral does not save fuel; in fact, it may even increase fuel consumption.
1
2
Share

How to Solve Water in Car Fuel Tank?

Water in the car fuel tank can be divided into three situations: 1. If there is a small amount of water in the fuel tank and the engine can start and run normally, the owner can add some fuel additives such as fuel tank water remover or fuel system cleaner to help the engine burn better. 2. If there is too much water, the sedimentation method can be used first. Let some water settle out, drain some fuel the next day, then remove and clean the spark plugs. Open the engine hood and expose the spark plugs and engine to sunlight for a while. 3. If the owner finds a significant amount of water in the fuel tank, it is recommended to tow the car to a professional maintenance shop to clean the fuel tank, fuel lines, and injectors, and then replace the fuel filter. In fact, water in the fuel tank is not scary as long as it is dealt with promptly. Never add a large amount of water to act as fuel during travel, and make sure the fuel tank cap is tightened properly on rainy days.
11
1
Share

What are the reasons for the Ford Focus not accelerating when the throttle is pressed?

Below are the reasons why the Ford Focus may not accelerate when the throttle is pressed: 1. When the throttle is pressed, the cable moves the throttle valve, which is equipped with a position sensor. The control unit uses the signal from the throttle position sensor to determine the opening of the throttle valve, calculates the corresponding signal voltage, and then determines the fuel injection amount based on this voltage. If the throttle position sensor is dirty or the voltage is imbalanced, it can cause an electronic throttle malfunction, resulting in the vehicle not accelerating even when the throttle is fully pressed. 2. If electronic throttle issues are ruled out, the problem may lie in the engine's intake, fuel system, or ignition system. The throttle position sensor signal is crucial for the engine's normal operation, which requires sufficient air. If the intake system has leaks or blockages, pressing the accelerator may lead to reduced power, inability to increase RPM, and vehicle shaking. 3. The engine's fuel system is critical. Using poor-quality gasoline can damage the fuel pump, cause catalytic converter failure, piston issues, etc., directly affecting engine power and leading to engine stalling or failure to accelerate.
8
3
Share

How to Debug a Dash Cam?

To debug a dash cam, first insert the memory card while the device is powered off, as most dash cams require one. Then, press and hold the power button to turn on the dash cam. When the vehicle starts, the dash cam will automatically begin recording. Finally, locate the "Settings" option and confirm to proceed with debugging. Below are the relevant details: 1. The main settings that need adjustment on a dash cam include: resolution, loop recording, parking monitoring, screen auto-off, video recording sound, and emergency recording sensitivity. These are just references; specific settings should be adjusted based on personal needs. 2. Resolution: Options include 720P, 1080P, 1200P, etc. Higher resolution results in clearer footage but consumes more memory. For long-distance driving, it is recommended to lower the resolution to extend recording time. For short-distance urban driving, higher resolution is advised to capture more details. 3. Loop Recording: Options include off, 3 minutes, 5 minutes, 10 minutes, etc. When set to off, the dash cam will stop recording once the memory card is full. When other options are selected, older footage will be automatically overwritten when the memory card is full, enabling continuous loop recording. 4. Parking Monitoring: This function can be turned on or off. When enabled, the dash cam will enter parking monitoring mode after the vehicle is turned off.
10
1
Share

What is the fuel tank capacity of the BMW X5 in liters?

The fuel tank capacity of the BMW X5 is 83 liters, as officially announced. Owners who have purchased the BMW X5 can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the BMW X5 is 95 octane, with a fuel consumption of 9.1 to 10.0 liters per 100 kilometers. A full tank can cover a distance of 830 to 912 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no issues, the fuel level will be accurately displayed on the gauge. The fuel gauge usually has 5 to 6 segments. It is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity.
1
4
Share

How to Safely Pass Oncoming Vehicles in Adverse Weather Conditions Such as Rain, Snow, or Fog?

Adverse weather conditions such as rain, snow, or fog can lead to poor visibility or slippery roads, negatively impacting a driver's judgment and operation. When passing oncoming vehicles, it is essential to reduce speed, maintain a sufficient safe distance, and proceed at a low speed. If necessary, stop to yield the right of way, avoiding any attempts to rush or accelerate around the other vehicle. Below are key precautions for passing oncoming vehicles: 1. When driving on roads without central barriers or centerlines and encountering an oncoming vehicle, reduce speed, keep to the right, and maintain a necessary safe distance from other vehicles and pedestrians. 2. When encountering an oncoming vehicle on a road with obstacles, the vehicle on the obstructed side should yield to the unobstructed vehicle. If the obstructed vehicle has already entered the obstacle section while the unobstructed vehicle has not, the obstructed vehicle proceeds first. On narrow slopes, the vehicle going uphill has the right of way. If the downhill vehicle is already halfway while the uphill vehicle has not started ascending, the downhill vehicle proceeds first. On narrow mountain roads without a centerline, the vehicle farther from the mountainside has the right of way. 3. When encountering an oncoming vehicle at night, switch to low-beam headlights at least 150 meters away. Use low beams when passing non-motorized vehicles on narrow roads or bridges.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.