···
Log in / Register

What are the major maintenance items at 60,000 kilometers?

6Answers
MelanieAnn
07/29/2025, 08:16:48 PM

The major maintenance items for a car at 60,000 kilometers are as follows: 1. Replace engine oil and oil filter. 2. Replace fuel filter. 3. Replace cabin air filter. 4. Replace engine air filter. 5. Replace brake fluid. 6. Replace transmission fluid. 7. Replace spark plugs. Below is relevant information about car maintenance: 1. The difference between 4S shop maintenance and third-party maintenance: 4S shop maintenance is more expensive but comes with guarantees; third-party auto repair shops offer lower costs but higher risks. 2. Precautions for car maintenance: The car engine should be cleaned at appropriate intervals. Prolonged use can form a thick layer of carbon deposits on the engine surface, which can significantly corrode the rubber components in the engine.

Was this review help?
111
Share
AliviaLee
08/16/2025, 12:32:52 AM

I just completed the 60,000 km major maintenance for my car, which included significantly more items than a regular service. The engine oil and oil filter were definitely replaced, given the engine has run for so long. Both the air filter and cabin air filter were also changed—they had turned black from Beijing's air quality. The spark plugs were a key focus, with all six cylinders getting new ones. The transmission fluid was completely replaced using a flush machine, which took 12 liters of oil. The brake fluid had excessive water content, so it was fully drained and refilled. The coolant was also updated to a new antifreeze formula. The technician meticulously checked the tire tread and brake pad thickness, performed tire rotation and balancing. Finally, a full vehicle computer diagnostic was done, and all chassis bolts were tightened. After everything, the car definitely feels much smoother.

Was this review help?
6
Share
Expand All
SavannahAnn
10/19/2025, 03:02:12 AM

As a seasoned driver, I'd remind you to pay close attention to several key items during the 60,000 km maintenance. Engine oil and oil filter are absolute must-changes. Transmission fluid, especially for automatic models, should never be skipped. Replace spark plugs when due, otherwise ignition efficiency will suffer. Both brake fluid and coolant need moisture content testing to determine replacement - I've seen many car owners neglect this, resulting in spongy brakes. Additionally, thoroughly inspect chassis rubber components for aging - replace cracked ball joint bushings immediately. Tires worn to the safety indicators require replacement, and the TPMS needs recalibration. A four-wheel alignment is highly recommended as it significantly improves high-speed stability.

Was this review help?
14
Share
Expand All
SanJudah
12/02/2025, 02:41:37 AM

Last time during maintenance, the technician told me that at 60,000 kilometers, special attention should be paid to the engine system. Fully synthetic engine oil and oil filter are the best choice, and replacing the air filter with a high-flow version can improve intake efficiency. The spark plugs need to be removed to check the gap, as standard nickel alloy plugs typically last about 60,000 kilometers. Don't skimp on transmission fluid changes—low-quality fluid can damage the valve body. If the coolant hasn't been changed in two years, it's recommended to replace it as the anti-corrosion additives degrade. The braking system is most critical; both the fluid and lines need inspection. Finally, carbon deposit cleaning is advised—after cleaning the intake manifold and fuel injectors, the throttle response becomes noticeably sharper. Keeping up with these items can extend your car's lifespan by several years.

Was this review help?
15
Share
Expand All
LeReed
01/22/2026, 09:13:08 PM

The 60,000 km maintenance involves many items but not all need to be done at 4S shops. For basic oil and filter changes, chain quick-service shops are a good option. Replacing the cabin air filter is super easy—just buy a Mann filter online for under 100 yuan. Choose iridium spark plugs for longer lifespan. Transmission fluid replacement should be done professionally using a flush machine for thoroughness. Change brake fluid if the moisture test pen shows over 3% water content. Rotate tires if wear is even; replace only when severely worn. Coolant can be kept if its freezing point is adequate, saving you a grand. Most crucially, don’t forget to check the timing belt—aged rubber components risk roadside breakdowns. Prioritize safety-related items if on a tight budget.

Was this review help?
12
Share
Expand All
LaMarley
04/18/2026, 03:49:13 AM

For peace of mind, ladies should prioritize the 60,000 km maintenance. Essential items like engine oil, oil filter, and cabin air filter must be done as they directly impact in-car air quality. Have the technician inspect cylinder carbon buildup with a borescope—perform walnut blasting if severe. Automatic transmission fluid must be replaced to prevent jerking or rolling. Pay special attention to the braking system: brake fluid testing/replacement, pad & rotor thickness measurement, and line inspection—your rainy-day driving depends on it. Upgrade headlight brightness; swapping halogens for LEDs enhances nighttime safety. Conclude with a full-vehicle disinfection, especially sterilizing the AC evaporator to prevent mold odors that cause headaches.

Was this review help?
9
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.