What are the maintenance methods for car wipers during use?

1 Answers
VonWalker
07/25/25 1:46pm
Car wiper maintenance methods during use are: 1. When using wipers to remove dust from the windshield on sunny days, be sure to spray windshield washer fluid and avoid dry wiping; 2. If there are other stubborn, hard contaminants on the glass, clean them manually and do not force the wipers to remove them directly; 3. When lifting the wiper blades during car washing or routine cleaning, hold the backbone of the wiper blade straight and gently return it when putting it back, avoiding snapping the wiper blade back suddenly; 4. In winter, first use an ice scraper to remove ice chips from the windshield surface to avoid increasing the burden on the wipers; 5. If contaminants on the wipers are difficult to clean or the wipers themselves have problems, repair them promptly.
Was this review help?
3
2
Share
More Forum Discussions

How to Use Cruise Control in the Volkswagen Teramont?

To use the cruise control in the Volkswagen Teramont: Press the SET button on the left side of the steering wheel when the speed exceeds 40 km/h to activate cruise control. The +/- buttons can then be used to accelerate or decelerate. The function of cruise control is to automatically maintain the vehicle's speed as set by the driver without the need to press the accelerator pedal, allowing the car to travel at a constant speed. The Teramont is SAIC Volkswagen's first large SUV, with dimensions of 5039mm in length, 1989mm in width, and 1773mm in height, and a wheelbase of 2980mm. The vehicle is equipped with a multimedia information display featuring the AppConnect mobile integration platform, supporting Apple CarPlay and Android Auto.
5
3
Share

Is replacing the rear axle considered a major repair?

Replacing the rear axle is considered a major repair. The rear axle refers to the rear drive shaft component of a vehicle's power transmission system. It consists of two half-axles that enable differential movement and also serves as a device to support the wheels and connect the rear wheels. Depending on the suspension type, rear axles can be classified as rigid or independent. The functions of the rear axle are: 1. To transmit the power from the engine, which comes through the clutch, transmission, and driveshaft, to the wheels via the differential, reducing speed while increasing torque; 2. To bear the load of the rear axle; 3. To transfer the reaction forces and moments from the road surface to the frame through the leaf springs.
13
3
Share

What is the method for adjusting car headlight height?

Adjusting car headlight height involves the following steps: 1. Locate the headlight height adjustment button in your vehicle; 2. Rotate upwards to lower the beam angle, rotate downwards to raise the beam angle; 3. Adjust the knob to your desired setting. Guidelines for high beam usage: 1. Use high beams when driving on unlit roads; 2. Use high beams when there are no oncoming vehicles; 3. Use high beams during nighttime driving when the approaching vehicle is beyond 150 meters. Hazards of high beam usage: 1. Causes temporary blindness to oncoming drivers during nighttime encounters; 2. Reduces perception of speed and distance; 3. Impairs judgment of road width.
17
2
Share

How many kilometers can the BYD Qin electric car run?

The pure electric mode of the BYD Qin can achieve a range of approximately 70 kilometers. Below is an introduction to the BYD Qin: 1. The BYD Qin is a plug-in hybrid model that adopts the 'dual-engine dual-mode' core power system. In pure electric mode, the BYD Qin achieves a range of 70 kilometers, with a fuel consumption of 1.6 liters per 100 kilometers. Its acceleration from 0 to 100 km/h in just 5.9 seconds demonstrates its excellent performance. 2. In tests where the battery was fully charged to 100% and then depleted to 5%, three BYD Qin vehicles achieved ranges of 66 kilometers, 92.3 kilometers, and 91.7 kilometers respectively, far exceeding the officially claimed range of 70 kilometers.
2
3
Share

How to Pry Open a Maintenance-Free Car Battery?

To pry open a maintenance-free car battery, follow these steps: Use a flat-head screwdriver to press against the battery's protective plate and pull firmly. Maintenance-free batteries feature a fully sealed structure designed in the 1990s and modern production techniques, characterized by: 1. Vibration resistance; 2. High-temperature resistance; 3. Compact size. Methods to repair maintenance-free batteries include: 1. Full charge-discharge repair: Fully charge the battery, then completely discharge it to restore functionality; 2. Water replenishment repair: Open the battery's top cover and inject a specific amount of distilled water into each cell; 3. Pulse repair: Use a specialized pulse repair device to eliminate sulfation through charge-discharge cycles.
7
4
Share

How to Turn Off the Cruise Control Indicator?

The method to turn off the cruise control indicator is: 1. Gently press the brake pedal, and the cruise control indicator light on the dashboard will change from green to white; 2. Remove your foot from the brake pedal, and the vehicle will enter a coasting state with gears engaged, gradually decreasing speed; 3. When the driver presses the brake pedal, the cruise control will automatically deactivate. The cruise control system, abbreviated as CCS, is also known as the cruise control driving device, speed control system, or autonomous driving system. Its function is to maintain the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a constant speed. With this system, drivers no longer need to control the accelerator pedal during long highway drives, reducing fatigue and unnecessary speed fluctuations, which helps save fuel.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.