What are the maintenance methods for car windshields?

What is the function of the crankshaft?

The function of the crankshaft is to convert the reciprocating linear motion of the pistons into its own rotational motion to output power externally. The crankshaft is a crucial component in the engine, which bears the force transmitted from the connecting rods and converts it into torque. This torque is then output through the crankshaft to drive other auxiliary components of the engine. To reduce the mass of the crankshaft and the centrifugal force generated during operation, the crankshaft journals are usually made hollow. Oil holes are drilled on the surface of each journal to allow the introduction or extraction of engine oil for lubricating the journal surfaces. To minimize stress concentration, the connections between the main journals, crankpins, and crank arms are all transitioned with smooth arcs.

6

5

Share

What is the function of a cylinder gasket?

The function of a cylinder gasket is to ensure a good seal between the cylinder block and the cylinder head, thereby maintaining the sealing of the combustion chamber and preventing gas leakage from the cylinder and coolant leakage from the water jacket. The cylinder gasket is a sealing component located between the top surface of the engine block and the bottom surface of the cylinder head. During engine operation, the temperature inside the cylinder is extremely high, and both engine oil and coolant have certain corrosive properties. Therefore, the cylinder gasket must possess heat resistance and corrosion resistance. There are very small gaps between the cylinder block and the cylinder head, and the top surface of the engine block and the bottom surface of the cylinder head have certain roughness and unevenness. Additionally, the cylinder head may deform under stress during engine operation. As a result, the cylinder gasket must not only have sufficient strength, pressure resistance, heat resistance, and corrosion resistance but also exhibit a certain degree of elasticity.

5

4

Share

What does the white triangle exclamation mark in a BMW 3 Series indicate?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common causes include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow parenthesis with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire pressure abnormality: A parenthesis with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible. Alternatively, you can perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the issue.

10

3

Share

How to adjust the audio system in Changan CS75?

Changan CS75 audio adjustment method: Open the settings on the central control screen, find the sound settings, and then directly adjust the equalizer according to personal preference. The car audio system is a radio device designed to alleviate the monotony of travel for drivers and passengers. The Changan CS75 is a compact SUV launched by Changan Automobile, with dimensions of 4650mm in length, 1850mm in width, and 1715mm in height, a wheelbase of 2700mm, equipped with a 1.5T turbocharged engine delivering a maximum power of 131kw, paired with either a 7-speed dual-clutch or a 6-speed manual transmission.

11

3

Share

Why Does an Automatic Transmission Car Roll Backward When Starting on a Slope?

Automatic transmission cars may roll backward when starting on a slope due to insufficient fuel supply. The driver should apply the throttle appropriately to ascend the slope. If only the D (Drive) gear is engaged without applying throttle, the idle speed might be insufficient to propel the vehicle uphill, causing it to roll backward. Automatic transmissions eliminate the need for manual gear shifting by the driver, as the vehicle automatically selects the appropriate gear based on speed and traffic conditions. Typically, automatic transmission cars have six gear positions arranged from top to bottom: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). For general driving needs, using the P (Park), R (Reverse), N (Neutral), and D (Drive) gears is sufficient. However, special driving conditions may require the use of other functional gears.

12

5

Share

What is the tire model of the Mercedes-Benz E300?

The front tire model of the Mercedes-Benz E300 is 245/40R19, and the rear tire model is 275/35R19. Among them, 295 indicates that the tire section width is 295 millimeters, 30 represents the percentage of the aspect ratio, that is, the height of the tire section is 30% of the width, R stands for radial tire, and 19 indicates the use of a rim with a diameter of 19 inches. The Mercedes-Benz E300 is a 4-door, 5-seater mid-to-large sedan launched by Mercedes-Benz, with a length, width, and height of 4942mm, 1860mm, and 1475mm respectively, and a wheelbase of 2939mm. It is equipped with a 2.0T turbocharged engine with a maximum power of 190kw, matched with a 9-speed automatic transmission.

20

1

Share

What are the maintenance methods for car windshields?

What is the function of the crankshaft?

What is the function of a cylinder gasket?

What does the white triangle exclamation mark in a BMW 3 Series indicate?

How to adjust the audio system in Changan CS75?

Why Does an Automatic Transmission Car Roll Backward When Starting on a Slope?

What is the tire model of the Mercedes-Benz E300?

How to Resolve the BMW 5 Series Reporting Powertrain Malfunction?

What to Do When Water Leakage from the Sunroof Causes Water Accumulation?

How to Tow the Baojun 510 from the Rear?

What car has the logo with two downward-facing Cs?