What are the maintenance items for BMW i3?

1 Answers
DelKayden
07/29/25 7:05pm
BMW i3 maintenance items include cleaning, inspection, replenishment, lubrication, etc. Cleaning: Clean external dirt from the vehicle, tidy up the cabin and interior, keep the engine and chassis surfaces free of dirt, and maintain the cleanliness of fuel, engine oil, air filters, and the battery. Inspection: Inspect the external appearance of various assemblies and mechanisms of the vehicle, check the tightness of external connecting bolts, assess the technical condition of electrical, lighting, signal, and instrument equipment, and check tire pressure. Replenishment: Inspect fuel, lubricating oil, coolant, brake fluid, battery electrolyte, and the working medium of the air conditioning system, and replenish as needed. Inflate tires with insufficient pressure as specified. Lubrication: Perform regular lubrication using the specified grade of lubricating oil according to the vehicle's lubrication chart. All lubrication nipples and vent plugs must be in place and kept unobstructed.
Was this review help?
19
5
Share
More Forum Discussions

Is There Clearance in Car Front Wheel Bearings?

There is clearance in car front wheel bearings. Here are additional details: 1. The axial clearance of car hub bearings, also known as preload: If it is too small, it will increase rolling friction resistance and reduce the vehicle's coasting performance. In severe cases, it may cause the bearings to overheat and lead to high-temperature sintering. If it is too large, it will cause wheel wobble and shimmy faults during driving, increasing abnormal wear on tires and related components. In extreme cases, it may cause a "flywheel" phenomenon, endangering driving safety. Typically, the standard limit for axial clearance in hub bearings is 0.05mm, which should not be exceeded. 2. Symptoms of failure: When one of the four wheel bearings is damaged, a continuous humming sound can be heard inside the car while driving, and the sound becomes louder as the speed increases. Generally, a slight humming sound can be heard starting at around 60km/h, becomes noticeable at 70-80km/h, and requires raising voices for conversation at 100km/h. At this point, a fine vibration can be felt underfoot.
7
3
Share

Why does the Boyue suddenly lose power and fail to start?

The reason why the Boyue suddenly loses power and fails to start is due to a dead or faulty battery. Below is an introduction to related content about Geely Automobile: 1. Geely Automobile: Geely Automobile is a domestic brand, not a joint venture. Geely is a Chinese automotive brand. 2. Vehicle Models: Includes SUVs, sedans, and other models. There are six automotive brands under Geely: Geely, Lynk & Co, Volvo, London Taxi, Proton, and Lotus. Below is extended information on the differences between domestic and joint venture vehicles: 1. Price Aspect: Due to core technologies being held by foreign companies, joint venture vehicles often have higher prices. 2. Investment Method: Domestic vehicles are designed and manufactured by Chinese themselves; joint venture vehicles are produced through Chinese investment in land, factory usage rights, and capital, while foreign investors contribute brand, technology, etc. 3. Brand Aspect: Domestic vehicles are independent brands; joint venture vehicles are produced through Sino-foreign cooperation.
18
0
Share

Does Car Glass Water Repellent Damage the Glass?

If used incorrectly, it may not only fail to repel water but also cause the glass to become blurry. Some low-quality water repellents can even make the wiper blades slip. If applied unevenly, it can prevent the wiper blades from cleaning the glass effectively. Here is some additional information: 1. Function: When sprayed on the glass, car glass rain repellent forms a nano protective film on the surface. This film has a hydrophobic effect, preventing the formation of a water film and maintaining the clarity of the glass. The rain repellent is non-corrosive and contains silicone resin and fluorinated organic compounds that repel water, reducing the contact area between water droplets and the glass, making it easier for the wind to blow them away. 2. Working Principle: During the application of car glass water repellent, special fluorine ions are combined with the addition of F12 super wear-resistant agents, forming an ultra-thin special coating layer on the windshield. This creates a strong water-repellent effect, causing rainwater to quickly form droplets upon contact with the glass and be blown away by the wind generated while driving.
19
2
Share

What Causes Poor Cooling Performance in a Van's Air Conditioning System?

The reasons for poor cooling performance in a van's air conditioning system include insufficient or excessive refrigerant, uncleaned air conditioning components, and excessive moisture in the dryer tank. Below are detailed explanations: 1. Insufficient or excessive refrigerant: The refrigerant's role is to transfer heat within the refrigeration system to achieve cooling. The air conditioning system requires a specific amount of refrigerant for optimal performance. If the refrigerant level is too low, it won't provide adequate cooling, or if it leaks, the refrigerant can deteriorate. Lower-quality refrigerants degrade faster, leading to poor cooling performance. 2. Air conditioning cleaning: There are two main components that need cleaning: the air filter and the air conditioning ducts. The air filter's purpose is to trap dust from the air, ensuring clean airflow inside the vehicle. If the air filter becomes too dirty and clogged, cold air cannot circulate properly, resulting in a lack of cooling. 3. Excessive moisture in the dryer tank: The dryer tank in the air conditioning system is crucial as its primary function is to absorb excess moisture from the pipelines. If the dryer tank is damaged and cannot absorb the excess moisture, the moisture can freeze in the expansion valve's throttle orifice, blocking the refrigerant flow and significantly reducing cooling efficiency.
13
4
Share

What is the voltage of a car alternator?

The normal voltage range of a car alternator after starting is "15.3V-12.8V"; below is relevant information about car alternator voltage: 1. Normal alternator voltage conditions: When the vehicle's air conditioning is operating and other electrical devices are used excessively, the alternator voltage may drop below 12.8V. At this point, the vehicle draws current from the battery and cannot charge the battery. After starting, the battery voltage is essentially equal to the alternator voltage, differing only by the line loss voltage from the alternator to the battery. When the vehicle is not started, the normal battery voltage range is 13.8V-12.8V. 2. Introduction to the alternator: The car alternator is the main power source of the vehicle. Its function is to supply power to all electrical devices (except the starter) when the engine is running normally (above idle speed) and simultaneously charge the battery. Based on the three-phase stator winding of a conventional AC generator, additional winding turns are added with lead-out terminals, and an additional three-phase bridge rectifier is included. At low speeds, the output is from the original and additional windings in series, while at higher speeds, only the original three-phase winding provides the output.
9
1
Share

What are the car brands starting with V?

The car brand starting with V is Volvo, and its models include: Volvo XC60, Volvo S90, Volvo XC90, Volvo S60, Volvo XC40, etc. Taking the 2021 Volvo S60 as an example, its body dimensions are: length 4761mm, width 1850mm, height 1437mm, wheelbase 2872mm, and fuel tank capacity 70L. The 2021 Volvo S60 is equipped with a 2.0L turbocharged engine, with a maximum horsepower of 163PS, maximum power of 120kW, maximum torque of 265Nm, and is paired with an 8-speed automatic transmission.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.