What are the maintenance items for an Audi Q3 at 40,000 kilometers?

1 Answers
AdalineMarie
07/30/25 7:36am
Audi Q3 maintenance items at 40,000 kilometers are as follows: Replacement of filters and engine oil: It is recommended to replace the engine oil, oil filter, air filter, cabin air filter, fuel filter, brake fluid, power steering fluid, and coolant. Also, inspect the condition of tires, brakes, chassis, lights, belts, etc. Important notes: The fuel filter and air filter should be replaced every 10,000 kilometers, while the cabin air filter should be replaced annually or every 20,000 kilometers. At 40,000 kilometers, a full fluid replacement is required. During each maintenance service, the transmission should be inspected. Although transmission fluid replacement is not necessary, it is important to regularly check the transmission fluid level and avoid using non-original fluids. Spark plugs should be inspected at 40,000 kilometers and replaced at 80,000 kilometers.
Was this review help?
18
1
Share
More Forum Discussions

What is the reason for the Mercedes-Benz auto hold not engaging?

Mercedes-Benz auto hold not engaging is due to poor foot technique and lack of adaptation, which can be improved with more practice. Below is relevant information about auto hold: 1. Definition: Traditional handbrakes require the driver to manually release the handbrake or skillfully coordinate the clutch and throttle for a smooth start on slopes. The auto hold function uses a slope sensor to provide precise braking force via the controller. During startup, the parking control unit calculates information from the clutch distance sensor, clutch engagement speed sensor, throttle pedal sensor, etc. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly. However, it is best to turn off this function during low-speed parking to avoid frequent activation. 2. Function: It simplifies operation by avoiding the use of handbrakes or electronic handbrakes, and automatic transmission models do not need to frequently switch between D to N or D to P.
7
2
Share

Where is the air conditioning filter of Lingzhi M5 located?

The air conditioning filter of Lingzhi M5 is located behind the glove box on the passenger side. Below is an introduction to the Lingzhi M5: 1. Introduction: The Lingzhi M5 is positioned as a 'business utility' MPV. 2. Features: (1) Exterior: The new vehicle adopts the family-style wing-shaped front grille. Combined with the robust headlights and chrome trim, the overall design aligns with the stable and elegant characteristics of MPV models. (2) Interior: The new vehicle is equipped with a center door assist handle and reading lights for the middle row. (3) Powertrain: The new vehicle is powered by a 1.6L Mitsubishi engine, model code 4A92, and utilizes a system fuel-saving platform, achieving a combined fuel consumption of 7.3L per 100 kilometers.
7
0
Share

What are the requirements for pulling over in Subject 3 of the driving test?

There are many requirements for pulling over in Subject 3 of the driving test. Below is a detailed introduction to the requirements for pulling over in Subject 3: 1. General requirements: Before stopping, failing to observe the traffic conditions behind and to the right through the interior and exterior rearview mirrors will result in failure. After the examiner issues the command to pull over, failing to stop within the specified distance will result in failure. After stopping, if the vehicle body exceeds the right edge line of the road or the sidewalk edge, it will result in failure. 2. Other requirements: After stopping, failing to turn your head to observe the traffic conditions to the side and rear before opening the door will result in failure. Failing to close the door after getting out of the vehicle will result in failure. Before stopping, not using or incorrectly using the turn signal will result in a 10-point deduction. After stopping, if the distance between the vehicle body and the right edge line of the road or the sidewalk edge is more than 30 centimeters, it will result in a 10-point deduction.
18
2
Share

What is the displacement of the Lamando 230tsi?

The 2015 Lamando 230tsi comes in two displacement options: 1.4T and 1.8T, while other models are equipped with a 1.4L engine. Engine displacement is a crucial parameter for measuring a vehicle. Most domestic car models include the engine displacement in their model names, and some even display the displacement directly on the body or rear of the car. Additional information: 1. The 'T' in car displacement: Indicates that the vehicle uses turbocharging. A turbocharged engine compresses air before supplying it to the cylinders to increase air density and intake volume. With increased intake, the fuel supply can be correspondingly increased, thereby boosting engine power. 2. The 'L' in car displacement: Stands for naturally aspirated. Naturally aspirated is a type of engine intake that relies on atmospheric pressure to draw air into the combustion chamber without any supercharger. Naturally aspirated engines offer smoother power delivery and more immediate response compared to turbocharged engines.
20
2
Share

Which type of engine oil is generally used for the Tiida?

Tiida generally uses 5W-30 engine oil. Below are the relevant details about the Tiida: 1. Body Dimensions: The Tiida has a length, width, and height of 4393/1766/1539 mm, a wheelbase of 2700 mm, and a trunk capacity of 435L. The interior space performance can meet most travel needs. 2. Powertrain: In terms of power, the Tiida is equipped with an HR16 1.6L engine, with a rated power of 122 horsepower (90 kW) and a maximum torque of 155 N·m. The transmission system is paired with either a 5-speed manual or CVT gearbox. 3. Smart Features: The Tiida is equipped with the Nissan-Connect super intelligent system, which includes six major functional modules: remote vehicle control, voice control, in-car online services, remote real-time monitoring, all-time online navigation, and online audio-visual entertainment.
12
3
Share

What does the BMW VIN number mean?

The meaning of the BMW VIN number is as follows: 1. Positions 1-3 (WMI): Represent the manufacturer, brand, and type. The 1st digit is the country code of production, the 2nd digit is the manufacturer code, and the 3rd digit is the vehicle type code. 2. Positions 4-8 (VDS): Represent vehicle characteristics. For passenger cars (category, series, body type, engine type, and restraint system type), MPVs (category, series, body type, engine type, and gross vehicle weight rating), and trucks (model or category, series, chassis, cab type, engine type, braking system, and gross vehicle weight rating), etc. 3. The 9th digit: Is a check digit, calculated according to standard weighted methods. Refer to the "World Vehicle Identification Number (VIN) Data Manual" for details. 4. Positions 10-12: Represent the model year, assembly plant, and sequential number.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.