What are the maintenance items for a car with 50,000 kilometers?

1 Answers
JulietAnn
07/29/25 7:44pm
The maintenance items for a car with 50,000 kilometers include: 1. Replace engine oil, oil filter, clean the air filter, and check whether the generator belt and wiper blades are damaged; 2. Check whether the levels of various fluids are normal; 3. Check whether the tire pressure is normal and whether there is any abnormal tire wear, bulging, or damage; 4. Inspect the car chassis for any abnormalities, including checking the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Verify whether all switches and lights in the car are working properly. Car maintenance precautions are: 1. Make an appointment in advance; 2. Record any faults or questions encountered while driving and inform the staff during the maintenance registration.
Was this review help?
11
4
Share
More Forum Discussions

What is the fuel tank capacity of the 2018 Volkswagen Bora?

The 2018 Volkswagen Bora comes in 8 models with a fuel tank capacity of 55 liters. It offers 2 engine options: 1.4T and 1.5L, and 3 transmission choices: dual-clutch, manual, and automatic. The engine delivers a maximum power of 96.0 kW, maximum horsepower of 131 PS, and maximum torque of 225.0 N·m. The vehicle dimensions are 4562×1793×1468 mm (length×width×height). For reference, the 2020 and 2021 Bora models have a fuel tank capacity of 50 liters, while the 2019 Bora retains the 55-liter capacity. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the manufacturer's specified capacity is measured from the tank bottom to the safe fill level, leaving some space between the safe fill level and the tank opening. This space accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening, the actual refueling amount may exceed the marked capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (empty) and F (full). When the needle approaches E, it indicates low fuel, while nearing F means sufficient fuel.
2
1
Share

Reasons for Changing the Automatic Transmission Fluid in the Alivio

Reasons for changing the automatic transmission fluid in the Alivio include the following hazards if the fluid is not replaced: 1. Damage to the transmission's shift control mechanism; 2. Abnormal wear of gears and clutch plates inside the transmission; 3. Impact on the normal operation of the transmission, leading to damage to the transmission valve body. Transmission fluid is different from engine oil. Although both fluids serve a lubricating function, their roles are distinct and should not be confused. Difference: Engine oil is the lubricant for the engine system, possessing properties such as oxidation resistance, anti-wear, and corrosion prevention. Transmission fluid, on the other hand, is primarily used to keep the gear system clean and extend the service life of internal transmission components. Due to the different structures and operating environments of the transmission and the engine, transmission fluid cannot be used as engine oil, nor can engine oil be used as transmission fluid.
16
3
Share

Is the Mercedes-Benz S400 an imported car?

Mercedes-Benz S400 is imported. Powertrain: The hybrid version system, commonly translated as the oil-electric hybrid system in the market, as the name suggests, represents that its powertrain has more than two power sources, allowing users to mix and use them. The Mercedes-Benz S-Class sedan is equipped with a fuel-optimized gasoline engine. Mercedes-Benz engine technology increases power output while reducing carbon dioxide emissions and fuel consumption. S400-V6 Engine: This power unit is designed with lightweight materials, with four valves per cylinder and adjustable camshafts, which not only enhances performance potential but also reduces weight.
6
3
Share

What is the real fuel consumption of the BMW M5?

BMW M5 real fuel consumption is 14 liters. Power configuration: The powertrain is equipped with a 4.4T V8 twin-turbocharged engine, which has a maximum output of 441 kW and a peak torque of 750 N·m, making it very powerful. The transmission is matched with an 8-speed automatic manual gearbox. Method to check fuel consumption: Press the corresponding button on the dashboard or steering wheel to switch the display to the desired data. For example, AVG stands for average fuel consumption (showing the vehicle's fuel consumption information over a certain period); A represents the total mileage; B is the single trip mileage. Press and hold the reset button to reset the odometer to zero.
5
2
Share

Why does the Audi A4 engine speed increase when going downhill?

Audi A4 uses lower gear engine braking when going downhill, so the engine speed naturally increases at this time. Engine speed: The engine speed is related to the number of work cycles per unit time or the effective power output of the engine. That is, the effective power of the engine varies with different speeds. Therefore, when indicating the effective power of the engine, the corresponding speed must also be specified. The effective power and its corresponding speed specified on the engine product label are called the rated power and rated speed, respectively. The operating condition of the engine at rated power and rated speed is referred to as the rated condition. The rated power is not the maximum power the engine can produce; it is the maximum usable limit of effective power determined based on the engine's intended use. For the same engine model, the rated power value may differ depending on its application. Effective torque also varies with engine conditions. Therefore, the maximum torque a car engine can output and its corresponding speed are used as indicators to evaluate the engine's dynamic performance. Engine working principle: The engine is a machine that converts chemical energy into mechanical energy. This conversion process is essentially the working cycle of the engine. Simply put, it involves burning fuel in the engine cylinders to generate kinetic energy, which drives the pistons inside the cylinders to move back and forth. This movement drives the connecting rods attached to the pistons and the crankshaft connected to the rods, causing them to rotate around the crankshaft center in a reciprocating circular motion, thereby outputting power. The working process of a four-stroke gasoline engine is complex, consisting of four strokes: intake, compression, combustion (expansion), and exhaust.
5
1
Share

What is the body material of the Ant car?

The body material of the Ant car is aluminum alloy. Aluminum alloy material: Aluminum alloy is a general term for alloys with aluminum as the base element and one or more alloying elements added. It is lightweight, soft, has good strength, excellent corrosion resistance, and processing performance. Body structure: The Ant car adopts a 3R-BODY ring-shaped body structure design. This lightweight ring-shaped path anti-collision body technology is one of the core standards of Chery's internal technical standard - CHERYSMA Intelligent Balanced Vehicle Lean System. This body design allows the vehicle to quickly disperse the force received during a severe collision throughout the entire body, offsetting the strong impact force and providing safety assurance for the driver and passengers.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.