What are the maintenance items for a car with 120,000 kilometers?

1 Answers
KimberlyMarie
07/29/25 11:50am
Maintenance items for a car with 120,000 kilometers include: changing the engine oil and transmission fluid; replacing the coolant; inspecting the brake pads; deep maintenance of the lubrication system, etc. Relevant information about car maintenance is as follows: 1. Introduction: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Maintenance scope: Modern car maintenance mainly includes the following items: engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
Was this review help?
18
4
Share
More Forum Discussions

What are the differences between the Tiggo 3 and Tiggo 3x?

The differences between the Tiggo 3 and Tiggo 3x are: 1. Different dimensions: The Tiggo 3 has a length, width, and height of 4420mm, 1760mm, and 1670mm respectively, with a wheelbase of 2510mm; the Tiggo 3x has a length, width, and height of 4200mm, 1760mm, and 1570mm respectively, with a wheelbase of 2555mm. 2. Different fuel tank capacities: The Tiggo 3 has a fuel tank capacity of 55L; the Tiggo 3x has a fuel tank capacity of 48L. 3. Different trunk volumes: The Tiggo 3 has a trunk volume of 550L; the Tiggo 3x has a trunk volume of 420L. 4. Different tire specifications: The Tiggo 3 has tire specifications of 215/60R17; the Tiggo 3x has tire specifications of 195/65R15.
20
1
Share

What is the fuel consumption of the Wrangler 2.0t?

The official fuel consumption of the Wrangler 2.0t is 9L/100KM, while the actual measured average fuel consumption is 12L/100KM, with a range of 10.6-13.44L. Relevant details are as follows: 1. The Wrangler 2.0t has a maximum horsepower of 266 and a maximum torque of 400 Nm, with an 8AT transmission across all models. The Wrangler 3.6 has a maximum horsepower of 284 and a maximum torque of 347 Nm, paired with a 5AT transmission. 2. The 2.0T engine has slightly less horsepower compared to the 3.6L engine, but the difference is not significant. Moreover, the 2.0T engine provides nearly 60 Nm more torque, making it more suitable for off-road vehicles that prioritize low-end torque.
18
5
Share

Who Issues the Motorcycle Loss Certificate?

Motorcycle loss certificates need to be processed at the vehicle management office. The specific procedures are as follows: 1. Steps for applying for deregistration: The owner of the motor vehicle should apply for deregistration at the vehicle management office where the vehicle is registered. When applying, they must fill out an application form and submit the motor vehicle registration certificate, motor vehicle license, the owner's identity proof, and the motor vehicle loss certificate. 2. Proof of motor vehicle loss due to natural disasters: A certificate issued by government departments at the township, town, or higher level in the area where the natural disaster occurred, proving the motor vehicle was lost due to the natural disaster. 3. Proof of motor vehicle loss due to fire: A certificate issued by the fire department of the county-level or higher public security authority in the area where the fire occurred, proving the motor vehicle was lost due to the fire. 4. Proof of motor vehicle loss due to traffic accidents: A certificate issued by the traffic management department of the county-level or higher public security authority in the area where the traffic accident occurred, proving the motor vehicle was lost due to the traffic accident.
12
0
Share

What are the steps to start an automatic transmission car with one-push start?

The steps to start an automatic transmission car with one-push start are: 1. Sit in the car and fasten the seat belt; 2. Press the brake pedal with your right foot and press the one-push start button with your right hand (make sure the gear is in P position when parking), at this time the car engine will start; 3. Shift to R gear or D gear (shift to R gear if you need to reverse, shift to D gear if you need to move forward); 4. Release the handbrake (before this, the right foot should always be on the brake pedal): If you need to reverse, gently lift your right foot and release the brake (but you need to keep your foot on the brake pedal to effectively control the reversing speed), after reversing to a certain position, press the brake pedal firmly, shift to D gear, move your right foot to the accelerator pedal, and gently press the accelerator to move forward. If you need to move forward and are already in D gear, move your right foot to the accelerator pedal and gently press the accelerator to move forward.
5
4
Share

What is the top speed of the Audi RS7?

Top speed refers to the maximum driving speed achievable on a well-maintained road surface. The top speed of the Audi RS7 is 250 km/h. The following factors can influence the speed: Impact of road conditions: Among the technical performance indicators of road conditions, the state of the road surface coating has a significant effect on various assemblies of the car. Good road conditions lead to better driving conditions and higher speeds; conversely, poor road conditions result in slower driving speeds. Impact of operating conditions: Operating conditions are one of the factors affecting the usage of car assemblies. For example, cars with the same load capacity driving in bustling urban areas versus suburban areas (with different road surface coatings) will have lower speeds in urban areas compared to suburban areas, higher engine speeds, and more frequent use of the transmission. Transportation conditions: In automotive transportation conditions, factors such as the length of the transport trip, trip utilization coefficient, load capacity utilization coefficient, trailer utilization coefficient, and the type of goods transported can all affect the driving speed. Climate and natural conditions: Natural climate conditions (ambient temperature, humidity, wind force, wind direction, and solar radiation intensity) influence the working temperature state of car assemblies, thereby affecting the driving speed.
5
3
Share

How is the oil film on car glass formed?

Car glass oil film may be formed due to automobile exhaust, oil smoke pollution, or residues from insects, bird droppings, resin, jam, etc. Automobile exhaust contains various pollutants produced by incomplete combustion. Frequent traffic congestion in urban roads inevitably leads to the adhesion of these pollutants on car glass, forming an oil film. Methods to deal with glass oil film include: using glass cleaner instead of tap water, as glass cleaner has better cleaning ability and provides lubrication and antifreeze functions that tap water cannot replace. Additionally, regularly applying a coating on the glass can prevent the formation of oil film. On coated glass, water droplets quickly slide off, ensuring clear visibility during rainy days.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.