···
Log in / Register

What are the maintenance items for a car at six years?

3 Answers
NevaehRose
07/30/25 1:15am
Here are the maintenance items for a car at six years: 1. Whether it's a domestic, joint venture, or imported model, a six-year-old car requires inspection of the timing belt and all vehicle fluids. 2. Check the transmission fluid, brake fluid, spark plugs, and tires to see if they need replacement. 3. Finally, inspect the engine for carbon buildup to determine if the throttle body and fuel injectors need cleaning. Additional information: 1. Engine oil: Full synthetic oil should be changed every 10,000 km, semi-synthetic every 7,500 km, and mineral oil every 5,000 km. 2. Transmission fluid: For manual transmissions, change every 60,000-100,000 km. Automatic transmissions require more frequent changes, typically every 4-6 years. Long-term neglect of transmission fluid changes may result in poor cold-start performance.
Was this review help?
17
1
Share
DiEmily
08/15/25 6:51am
Six-year car maintenance items cannot be taken lightly. As an experienced driver with decades of driving experience, I can tell you that the key tasks are changing the engine oil and oil filter every 10,000 kilometers or once a year. Check if the brake pads and brake fluid have aged to avoid issues in emergencies. Ensure tire wear is even, and replace them if the tread depth is below 1.6 mm to prevent skidding in rainy weather. Spark plugs should also be replaced, typically every 5-6 years, to ensure proper ignition. The timing belt must be inspected—neglecting it could damage the engine. Replace the coolant and transmission fluid to prevent freezing, rust, or overheating. For a six-year-old car, also pay attention to aging suspension components and listen for any unusual noises. With these steps done properly, your car can keep running smoothly for several more years without breaking down.
Was this review help?
17
0
Share
Expand All
OAlexa
10/20/25 6:05am
As a young person who often repairs cars, I've noticed that many vehicles start developing minor issues around the six-year mark. Essential maintenance items include changing the engine oil and oil filter regularly to prevent carbon buildup in the engine. Don't forget to replace the air filter as well, as a clogged one can affect air intake and fuel consumption. A thorough inspection of the braking system is necessary, checking for worn brake discs and pads, and whether the brake fluid has deteriorated. Suspension components like shock absorbers should be examined for any signs of oil leakage. The battery typically nears the end of its lifespan at six years, so testing its voltage can prevent unexpected power failures. Additionally, inspect the tension of drive belts and timing belts, and repair the timing system if it shows signs of wear. Don't overlook lighting checks to ensure safe nighttime driving. Keeping these aspects in order will result in smoother and more cost-effective driving.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

Can You Change Lanes When There's a Dotted Line Next to a Solid Line?

One side is a dotted line and the other is a solid line. You can change lanes in this case, but only from the dotted line side to the solid line side, and the lane change must be completed within the dotted line segment. If you exceed the end of the dotted line, it counts as driving over the line. Here are some precautions to take when changing lanes at a dotted line: 1. Violations: During peak traffic hours, do not force a lane change, as this may disrupt the normal flow of traffic behind you and could result in penalty points or fines. Additionally, when waiting in line at a traffic light, if the queue extends to the dotted line area, some drivers might try to squeeze into the adjacent lane if the vehicles there are slow to start. This is also considered a violation. 2. No consecutive lane changes: Even if the road is clear, you cannot change more than two lanes consecutively in a dotted line lane. Consecutive lane changes are a violation and can result in a 3-point deduction and a fine.
5
5
Share

Which Cars Can Drive Autonomously?

Currently, autonomous driving cars include: Tesla Model X, Volvo XC90, Audi Q7, Volkswagen Tayron, and Geely Binyue. The expansion of autonomous vehicles is as follows: 1. Definition: Autonomous vehicles, also known as driverless cars or computer-driven cars, are unmanned ground vehicles with transport power. 2. Levels: Level 0 is completely operated by the driver; Level 1 means the car can assist the driver in completing certain driving tasks under specific conditions; at Level 2, autonomous driving can complete certain driving tasks, but the driver needs to constantly monitor the surrounding environment and be ready to take over in case of danger, which is the autonomous driving technology that many current autonomous vehicles have achieved; Level 3 means the driver hardly needs to be ready to take over, and the car can independently complete all actions; Levels 4 and 5 represent fully autonomous driving technology, where the car no longer requires driver control, with the difference being that Level 4 is fully independent only under specific conditions such as highways, while Level 5 operates under any conditions.
20
5
Share

Where is the Audi Brake Pedal Located?

Audi's brake pedal is essentially the foot brake. Function of the Brake Pedal: For small vehicles descending long slopes: It is recommended to use lower gears and rely on engine braking to decelerate, minimizing the use of the brake pedal. For large vehicles descending long slopes: Large vehicles or heavily loaded trucks must avoid prolonged braking; engine braking must be utilized for deceleration. Pedal Position: The brake pedal, commonly referred to as the foot brake, features a small pedal connected to the brake lever, hence also called the brake pedal. Similarly, the clutch has a small pedal known as the clutch pedal—the clutch is on the left, and the brake is on the right.
18
5
Share

What causes a sudden complete power loss in a Buick GL8?

Buick GL8 sudden complete power loss may be caused by prolonged vehicle parking leading to battery discharge, battery reaching the end of its service life, engine damage, or insufficient battery electrolyte. Below are detailed explanations: 1. Car battery: Also known as storage battery, it's a type of battery that works by converting chemical energy into electrical energy. Typically, what people refer to as batteries are lead-acid batteries. These are mainly composed of lead and its oxides, with sulfuric acid solution as the electrolyte. Ordinary batteries have plates made of lead and lead oxides, with sulfuric acid solution as the electrolyte. Their main advantages are stable voltage and low cost; disadvantages include low specific energy (the amount of electrical energy stored per kilogram of battery), short service life, and frequent maintenance. 2. Dry-charged lead-acid battery: Its main characteristic is that the negative plate has high electrical storage capacity. In a completely dry state, it can preserve the obtained charge for two years. When in use, you only need to add electrolyte and wait 20-30 minutes before it can be used.
3
3
Share

Why Are There Many Rust Spots on the Hood of the Chery Arrizo 5?

The reason for rusting is insufficient anti-rust treatment of the components. Precautions for car rust: Most cases of paint rust are caused by collisions, scratches, or other damage to the paint surface, which gradually leads to rust spots. This may not significantly affect the car's functionality but can be very unsightly. Handling methods: For minor paint damage like scratches, you can use water sandpaper to remove the rust. Wet the sandpaper and carefully sand away the rust—avoid random or careless sanding. After removing the rust, apply primer yourself. However, if the paint damage is severe, it's best to visit a professional auto body shop for repainting as soon as possible. The more severe the rust, the more troublesome it is to fix.
14
4
Share

Under What Circumstances Should You Not Press the Brake Pedal?

You should not press the accelerator pedal when shifting gears because during gear shifting, the engine and transmission gears are in a separated state. Pressing the accelerator pedal at this time means the engine's power cannot be transmitted to the transmission, resulting in wasted effort, fuel consumption, and potential gear wear. Below is relevant information about car pedals: 1. Clutch Pedal: Most clutches use hydraulic assistance. If air enters this hydraulic system, it can cause incomplete clutch disengagement and difficulty in shifting gears. This is reflected in the pedal feel as a loose and spongy sensation, as if stepping on air. 2. Brake Pedal: The brake pedal is the largest and sturdiest among the three pedals. Its function is to slow down or stop the car. Different car models have varying brake sensitivity and pedal travel, which are related to the manufacturer's tuning. 3. Accelerator Pedal: The brake pedal is used to control the car's speed. Pressing the accelerator pedal increases the engine's RPM and power output, while releasing it decreases the engine's RPM and power.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.