···
Log in / Register

What are the maintenance items for a car at 5,000 kilometers?

4 Answers
DelVincent
07/28/25 7:34am

The most basic maintenance items for a car at 5,000 kilometers are the primary car maintenance items. Here are the extended details: 1. The cleaning items for primary vehicle maintenance include: cleaning the car body and wiping the engine and chassis parts. 2. Remove deposits from the oil filter, turn the filter handle 3-4 times, clean the oil filter, and replace the filter element according to the degree of contamination. 3. Lubrication items include: checking the oil levels of the engine, transmission, rear axle, and steering gear, and adding lubricating oil as required. 4. Inspection and tightening items include: checking the steering gear, tie rods, and steering arms for secure connections. Inspect the brake valve and brake pipes for air leaks, check the brake fluid level in the hydraulic brake master cylinder, and add brake fluid as required.

Was this review help?
16
3
Share
OCamilla
08/11/25 2:58pm

The 5,000-kilometer maintenance mainly includes several key points. Changing the engine oil and oil filter is the top priority, as engine operation generates impurities, and failing to replace them in time can lead to increased wear or even engine damage. Next is checking tire pressure and wear condition—I've seen many car owners neglect this, resulting in uneven tire wear that affects handling and safety. The braking system also needs inspection, such as brake pad thickness and brake fluid level, to avoid emergency brake failure. Fluid checks are equally important—coolant, power steering fluid, and windshield washer fluid should all be topped up. The air filter should be cleaned or replaced, as a dirty one can obstruct air intake and affect engine performance. Light checks, including headlights and turn signals, are essential to ensure safe nighttime driving. I also recommend checking for battery terminal corrosion and ensuring the electrical system works properly. In short, performing these maintenance tasks can extend the vehicle's lifespan, save on major repair costs, and boost driving confidence.

Was this review help?
19
0
Share
Expand All
VonAngela
09/28/25 2:26am

For every 5,000-kilometer car maintenance, I thoroughly inspect all items. The engine oil must be replaced along with the filter; otherwise, internal engine friction increases, leading to louder noise. For tire pressure checks, I prefer using a pressure gauge while also checking for nails or cracks. The braking system is visually inspected for brake pad wear, and I listen for any unusual sounds during rotation. Various fluids, like coolant, are checked—I top them up if levels are low. The air filter is removed to shake off dust or replaced entirely. Lights are tested, ensuring both high and low beams function properly. Battery health is also checked by measuring voltage levels. After completing these tasks, I usually wash the car to maintain a clean appearance. Experience has taught me that addressing small issues early saves money and hassle—for example, delaying an oil change can lead to increased fuel consumption or even a breakdown. After years of driving, I’ve learned that regular car maintenance is as crucial as maintaining my own health.

Was this review help?
19
0
Share
Expand All
LaEmily
11/11/25 4:22am

The maintenance items after the car runs 5,000 kilometers are quite simple in my opinion. First, change the engine oil and oil filter to prevent carbon buildup and ensure smooth engine operation. Check the tire pressure to meet the standard, as excessive wear affects safe driving. Inspect the levels of brake fluid and coolant, and top them up if necessary. Clean or replace the air filter if it's dirty. Don't overlook other basics like checking if the lights are working properly. Completing these fundamental tasks will make the car run more stably and reduce the likelihood of breakdowns. Identifying issues early can save money on major repairs later.

Was this review help?
4
1
Share
Expand All
More Forum Discussions

Is the Audi 400 Complaint Hotline Effective?

Audi 400 complaint hotline is effective. By dialing the Audi 400 hotline, you can get in touch with the manufacturer's customer service to help solve problems. Audi places great emphasis on brand building and after-sales service, so complaints are generally handled effectively after calling. Here is more information about Audi cars: 1. Audi is a German luxury car brand with a logo of four interlocking rings. Its headquarters are in Germany, but it has branches in many countries including China. It is also one of the oldest car manufacturers in Germany. 2. The best-selling Audi models in China are the Audi A4 and A6. The Audi A4 is a B-class model launched in April 2003, which was the first to introduce the long wheelbase and turbo concept. It offers three displacement options: 1.8T, 2.4, and 3.0. Among them, the 1.8T has four models, the 2.4 has three models, and the 3.0 has only one model. It is also equipped with a full-time four-wheel drive system.
3
2
Share

How to adjust the radio time on Zhonghua V3?

Zhonghua V3 radio time adjustment steps are as follows: 1. Turn on the radio power switch. 2. Press and hold the volume adjustment knob until the time interface appears. 3. Briefly release the button and then press and hold it again. At this time, you will notice that the (hour setting) is flashing. 4. Release the button and then rotate the volume knob clockwise or counterclockwise to adjust the time. To switch to the next adjustment, simply press the volume adjustment knob briefly. Below is more information about the Zhonghua V3: 1. Body dimensions: The Zhonghua V3 is positioned as a compact SUV, with a length, width, and height of 4200/1790/1600mm, a wheelbase of 2570mm, and a minimum ground clearance of 170mm. 2. Powertrain: The Zhonghua V3 offers two power options for consumers: a 1.5L engine and a 1.5T engine. The 1.5L engine has a maximum output power of 107 horsepower and a peak torque of 145 N·m; the 1.5T engine has a maximum output power of 150 horsepower and a peak torque of 220 N·m. The transmission system paired with the engine is either a 5-speed manual or a 5-speed automatic transmission.
7
4
Share

What is the wheelbase of the domestically produced Jaguar XF?

The wheelbase of the domestically produced Jaguar XF is 3100 millimeters, with a length, width, and height of 5093 millimeters, 1880 millimeters, and 1456 millimeters respectively. Compared to the overseas version, the domestically produced model has an extended wheelbase; relative to the standard version, the wheelbase is increased by 140mm. Below is an introduction to the three engines equipped in the domestically produced Jaguar XF: 1. The low-power version 2.0-liter turbocharged engine has 200 horsepower and a maximum torque of 320 Nm, with peak torque available from 1200 to 4000 rpm. 2. The mid-power version 2.0-liter turbocharged engine has 250 horsepower and a maximum torque of 365 Nm, with peak torque available from 1300 to 4500 rpm. 3. The high-power version 2.0-liter turbocharged engine has 300 horsepower and a maximum torque of 400 Nm, with peak torque available from 1500 to 4500 rpm.
6
0
Share

What engines are used in the Volkswagen Teramont X?

The Volkswagen Teramont X is equipped with a total of three engines: a low-power version of the 2.0-liter turbocharged engine, a high-power version of the 2.0-liter turbocharged engine, and a 2.5-liter turbocharged engine. Below is more information about these three engines: 1. The low-power version of the 2.0-liter turbocharged engine in the Teramont X delivers 186 horsepower and a maximum torque of 320 Nm. This engine reaches its peak torque between 1500 to 4000 rpm and its maximum power between 4100 to 6000 rpm. It features hybrid injection technology, uses an aluminum cylinder head and cast iron cylinder block, and is paired with a 7-speed dual-clutch transmission. 2. The high-power version of the 2.0-liter turbocharged engine produces 220 horsepower and a maximum torque of 350 Nm. This engine achieves its peak torque between 1500 to 4400 rpm and its maximum power between 4500 to 6200 rpm. It is equipped with direct fuel injection technology, uses an aluminum cylinder head and cast iron cylinder block, and is matched with a 7-speed dual-clutch transmission. 3. The 2.5-liter turbocharged engine generates 299 horsepower and a maximum torque of 500 Nm. This engine reaches its peak torque between 2750 to 3500 rpm and its maximum power at 6000 rpm. It features direct fuel injection technology, uses an aluminum cylinder head, and is paired with a 7-speed dual-clutch transmission.
15
4
Share

Can the windows of a Haval H6 be closed with the key after the engine is turned off?

Yes. After turning off the engine, you can close all the windows by long-pressing the lock button. You can also set the windows to automatically close when locking the car in the central control panel. Additional information about the windows is as follows: 1. The windows are an important part of the entire vehicle body. 2. Depending on the installation position of the glass, the windows include: front and rear windshields, side windows, and door windows. 3. The design, structure, and quality of the windows have a significant impact on the driver's visibility, passenger comfort, exterior aesthetics, and aerodynamic characteristics. 4. The window structure is typically a curved, enclosed type, with rubber sealing strips connecting the window frame and the glass. The sealing strips serve as a seal and buffer to prevent damage to the windshield due to deformation of the window frame when the vehicle body is under stress.
5
4
Share

Is It Normal for the Steel Rim Inside New Car Tires to Rust?

It is normal for the steel rim inside new car tires to oxidize and rust. Simply remove the rust with sandpaper, and it generally does not affect normal usage. Below is some relevant information about wheel hubs: 1. Many drivers often overlook the presence of curbs and other low obstacles while driving, which can easily cause damage to the wheel hubs. Therefore, it is important to carefully observe road conditions and surrounding terrain to avoid hub damage due to negligence. To maintain the appearance of the wheel hubs, aside from being extra cautious to prevent accidental damage while driving, regular maintenance and care are also necessary. 2. Generally, the wheel hubs should be thoroughly cleaned once a week. Remove sand particles, brake pad residues, salt, and other contaminants that can damage the wheel hubs. Otherwise, the alloy surface may corrode and deteriorate. After cleaning, apply an acid-resistant cleaner to both the inner and outer surfaces of the wheel hubs. Additionally, it is recommended to wax the wheel hubs every two months to extend their lifespan. However, avoid using paint brighteners or other abrasive materials on the wheel hubs.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.