···
Log in / Register

What are the maintenance items for a car at 100,000 kilometers?

1 Answers
LeOlivia
07/29/25 8:17pm

Maintenance items for a car at 100,000 kilometers include: changing the engine oil, oil filter, and cabin air filter, as well as cleaning the engine intake and fuel system. Changing the engine oil and oil filter is a mandatory task for every maintenance service. Due to the harsh conditions of high temperature and high pressure inside the engine, the shelf life of engine oil is significantly shortened, and its performance degrades substantially. Over time, it fails to provide adequate protection for the engine. The oil filter prevents impurities from mixing with the oil, which can cause oxidation and lead to the formation of sludge that clogs the fuel system. The cabin air filter functions similarly to the air filter, ensuring that you can breathe fresh air when the car's air conditioning is on, hence the need for regular replacement.

Was this review help?
3
2
Share
More Forum Discussions

What are semi-trailers and full trailers?

Trailers are divided into two types: full trailers and semi-trailers. A full trailer bears its total weight entirely by itself, while a semi-trailer shares part of its total weight with the towing vehicle. The differences between full trailers and semi-trailers are as follows: 1. The connection method with the towing vehicle differs. A full trailer connects its front end to the rear of the towing vehicle, which only provides pulling force without bearing weight. A semi-trailer rests the front half of its body on the fifth wheel coupling of the towing vehicle, with the rear axle of the towing vehicle bearing part of the trailer's weight. 2. Full trailers can increase cargo capacity, reduce fuel consumption, and thereby lower transportation costs. Semi-trailers must not exceed 17 meters in length, except for car carrier semi-trailers.
6
2
Share

Does the term 'vehicle passenger' refer to the front-seat passenger?

Passengers refer to individuals other than the driver. Below is more information about vehicle passengers: 1. In a 5-seat vehicle, there are 4 passengers. When purchasing insurance, there is a separate passenger insurance policy, and the number of policies required corresponds to the number of seats. For example, in a 5-seat vehicle, you need to purchase passenger insurance for 4 people. 2. If a traffic violation is captured by electronic monitoring, it generally refers to the passenger in the front seat. When the vehicle is in motion, the front-seat passenger should also wear a seatbelt. Most violations occur because the front-seat passenger is not wearing a seatbelt, and such violations typically result in a fine of 50 yuan without deducting points.
19
1
Share

Which gear is best for an automatic car when waiting at a red light?

When waiting at a red light with an automatic transmission, the following gear options are available: 1. D gear, hold the brake: Quick start, brake light stays on, prolonged braking can cause foot fatigue, consumes more fuel, and may cause car vibration. Recommended for short stops (a few seconds). 2. Shift to P gear, engage the handbrake: Slower start, safest option. Shifting from D to P usually passes through R gear, causing the reverse light to flash briefly. Recommended for slightly longer stops (around a minute). 3. N gear, hold the brake: Moderate start, safe, brake light stays on, slightly better for the car compared to D gear with braking. Can be adopted.
20
4
Share

Why can't a C1 license holder drive a motorcycle?

According to regulations, a C1 license holder cannot drive a motorcycle because it does not match the permitted vehicle types. To drive a motorcycle, one must hold an E, D, or F license. Permitted vehicle types for a C1 driver's license: The permitted scope of a C1 driver's license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with seating capacity of 9 or fewer people. Vehicles that a C1 license holder cannot drive: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license holder cannot drive vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. What is a C1 driver's license: A C1 driver's license is one of the codes for motor vehicle driver's licenses. The permitted scope of a C1 driver's license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with seating capacity of 9 or fewer people. Age requirements: The minimum age to apply for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 or older must pass tests on memory, judgment, and reaction abilities.
3
5
Share

Where are the position lights on a car?

The position lights of a car are located at the edges of the car's roof. Here is an introduction to car position lights: 1. Position lights are also called width lights, commonly known as small lights. 2. The function of position lights: Position lights are warning lights used to alert other vehicles. Literally, 'position' means warning, and 'light' refers to the outline, so position lights are warning lights used to alert other vehicles. 3. Position lights are generally installed at the edges of the car's roof, which can indicate both the height and width of the car. 4. There are two types of position light switches: rotary knob type and lever type. As shown in the figure above, the owner can find the gear to turn on the position lights according to the markings on the car. The lights that light up front and rear are the position lights.
4
1
Share

Why is there often a gear grinding sound when shifting into reverse?

Gear grinding sound when shifting gears, also known as gear clash during shifting, mainly occurs due to three reasons: 1. Clutch failure, which prevents proper disengagement, leading to gear clash during engagement. Not fully depressing the clutch pedal when shifting can cause gear damage. 2. Improper clutch usage, where gears are engaged before the clutch is fully disengaged. This results in a rattling sound and failure to engage the gear. Gear clash during shifting can cause lifespan damage to the transmission. 3. Shifting the gear lever back and forth when in neutral. This can lead to unnecessary wear of components and affect the timing of gear shifts. Skipping gears when upshifting. Upshifting should be done step by step to prevent loss of power continuity, while downshifting can skip gears.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.