···
Log in / Register

What Are the Maintenance Items for a Car?

4 Answers
VonStephen
07/29/25 9:43pm
  1. Car Inspection: Regular inspections should be performed on the car, such as checking the steering wheel, tires, horn, indicator lights, and other components for faults, and any issues should be repaired promptly. 2. Car Cleaning: Regular cleaning operations should be carried out, such as cleaning relevant parts of the car. 3. Oil and Oil Filter Replacement: The car's oil and oil filter should be replaced regularly as part of routine maintenance to prevent faults and potential hazards. 4. Comprehensive Vehicle Check: In addition to regular cleaning and component inspections, a full vehicle inspection should be conducted annually to identify and prevent potential faults in any parts of the car.
Was this review help?
9
2
Share
DiEverly
08/15/25 9:04pm

I've been driving for many years and have done quite a few maintenance tasks. Every week, I check the tire pressure to see if there's any air leakage or severe wear, which can prevent blowouts at high speeds. Every month, I inspect the lights and brakes to ensure the brakes are responsive and the lights are bright, making nighttime driving safer. I change the engine oil and oil filter every 5,000 kilometers or so; otherwise, carbon buildup in the engine can shorten its lifespan. The air filter needs to be replaced regularly, especially in dusty areas. Additionally, I replace the cabin air filter before summer to ensure clean cold air; the battery terminals are cleaned once a year to avoid corrosion and power loss. Regular maintenance can save on repair costs and make the car more durable. Don’t overlook small details, like the windshield washer fluid and coolant levels—top them up promptly if they’re low, as breaking down on the road is a hassle. Overall, it’s important to develop good habits, as a well-maintained car ensures a safer and more reliable drive.

Was this review help?
6
0
Share
Expand All
DiGrant
10/17/25 5:25am

As a family car owner, the focus of maintenance is on safety and reliability. I regularly inspect the braking system, including brake pads, discs, and brake fluid replacement, which is crucial for emergency stopping stability; tire tread depth must be sufficient for water drainage and skid prevention in rainy conditions. For the engine, I change the oil and filter every six months to prevent carbon buildup; coolant levels and quality should be checked to avoid overheating. All lights and turn signals must be in working order, and wiper blades should be replaced promptly to ensure clear visibility. Don't forget about drivetrain maintenance—regular transmission fluid changes can extend its lifespan; belts and hoses should be inspected every two years and replaced if aged. Safety is no small matter; maintenance is all about ensuring worry-free travel for the whole family. Address minor issues promptly; don't wait for major problems to arise.

Was this review help?
5
2
Share
Expand All
DelAddyson
11/30/25 6:08am

Maintenance saves big money, and I stick to the basics. Changing oil and filters is crucial—do it every 8,000 km to spend a little now and avoid costly engine repairs. Rotate tires regularly to even out wear and delay replacements. Clean battery terminals to extend their life. Replace air and cabin filters every season—excess dust hurts fuel efficiency. Check tire pressure and brake fluid routinely; fix leaks immediately. Simple upkeep like lights and wipers ensures safety. Skipping maintenance spikes repair bills, so invest a little time monthly. Small efforts yield long-term savings.

Was this review help?
6
1
Share
Expand All
More Forum Discussions

Where is the OBD port located on the Volkswagen Touran?

Volkswagen Touran's OBD port is located behind the plastic cover under the steering wheel. Relevant introduction about the Volkswagen Touran is as follows: 1. In terms of safety, it retains galvanized steel plates and laser-welded body, and adds xenon headlights. Additionally, the entire series is equipped with rear parking sensors and electrically adjustable heated exterior mirrors. 2. In terms of power, the Touran mainly features two major engine displacements: 1.8T and 2.0L. The 1.8T engine delivers a maximum power of 110 kW and reaches a peak torque of 220 Nm between 2000 and 4600 rpm. The 2.0L engine produces a maximum power of 85 kW and achieves a peak torque of 170 Nm at 4000 rpm. 3. The body lines are smooth and elegant, with the silver roof rack and turn signals integrated into the exterior mirrors being the only decorative elements.
2
3
Share

How to Solve the Abnormal Noise in the Clutch of BYD Song Manual Transmission?

BYD Song manual transmission clutch abnormal noise solutions are as follows: 1. Locate the clutch slave cylinder in the engine compartment, remove the clutch slave cylinder, and take off the sealing rubber sleeve of the release fork. 2. After removing the rubber sleeve, the clutch release fork can be clearly seen. Find the correct position, apply grease, and then restore the rubber sleeve and slave cylinder to their original state. If noise persists, manual greasing can be performed subsequently. BYD Song manual transmission clutch abnormal noise faults and solutions are as follows: 1. Check whether the fasteners at each connection of the clutch operating mechanism are loose. If loose, they should be tightened. 2. Check the free travel of the clutch pedal. If there is no free travel, adjust it as required. 3. Check whether the front bearing or bushing of the transmission first shaft is worn and replace it if necessary.
13
4
Share

How to Add Brake Fluid?

Brake fluid adding method: First, open the car hood, locate the brake fluid reservoir, open the reservoir cap, and add brake fluid. Normally, the water content in brake fluid should be below 1%. Brake fluid is the liquid that transmits force in the braking system and is crucial for driving safety. When the water content in brake fluid reaches 3%, the boiling point of the brake fluid will decrease by 25%. Below is a detailed introduction to the hazards of excessive water content in brake fluid: Since brake fluid has strong water absorption, if the water content is too high, it will lower the boiling point of the brake fluid. Over time, a large number of bubbles will form in the brake lines, which can significantly affect the performance of the braking system. This is because the braking system generates high temperatures during operation, causing the water in the brake fluid to vaporize. This makes the gas easy to compress, leading to dangerous situations such as soft brakes, weak braking, or even brake failure. During routine maintenance, a brake fluid water content tester can be used to determine if the brake fluid needs to be replaced. For new brake fluid, the water content is approximately 0%, and the standard should not exceed 2.5%. If it exceeds 2.5%, the brake fluid should be replaced.
17
4
Share

What car is the logo H?

H is the logo of Honda cars. More information about the Honda logo is as follows: To reflect the youthful, technologically advanced, and innovative design characteristics of Honda, the company uses an "H" logo resembling a three-stringed speaker, symbolizing technological innovation, unity and progress, strong management, a sense of tension, and relaxation. Here is more about Honda: 1. Honda's brands include: Accord, City, Odyssey, CR-V, Fit, Legend, Stream, and S2000. 2. Taking the CR-V as an example: It is a compact SUV produced by Dongfeng Honda, with body dimensions of 4621mm in length, 1855mm in width, and 1679mm in height, a wheelbase of 2661mm, and a 5-door, 5-seat body structure. 3. In terms of power, the Honda CR-V is equipped with a 4-cylinder, 1.5T, 193-horsepower turbocharged engine, paired with a 6-speed manual transmission.
8
0
Share

What is the ground clearance of the Lynk & Co 03 in centimeters?

The ground clearance of the Lynk & Co 03 is approximately 13 centimeters. The clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. Vehicles with lower ground clearance have a lower center of gravity but poorer passability. The Lynk & Co 03 is a compact car under the Lynk & Co brand, with dimensions of 4658mm in length, 1840mm in width, and 1459mm in height, and a wheelbase of 2730mm. The Lynk & Co 03 is equipped with three types of engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. All engines feature direct fuel injection technology and use aluminum alloy cylinder heads and blocks.
14
2
Share

What is the time setting procedure for Wuling Hongguang?

The time setting procedure for Wuling Hongguang is: 1. First, press and hold the clock button until you hear a beep, then release the button. The time display will start flashing. 2. To set the hour, press and hold the preset button (H side) until the hour reading increments to the desired time. 3. To set the minutes, press the M side, following the same principle as setting the hour. Finally, press the clock button to confirm the set time. More information about Wuling Hongguang: The Wuling Hongguang is equipped with two engines, the PTEC1.2L and PTEC1.4L, designed and manufactured according to General Motors' global powertrain standards. These engines feature DOHC double overhead camshaft and four valves per cylinder design technology. The 1.4L engine delivers an impressive 75 kW of power and 131 Nm of maximum torque, making it outstanding among similar engines.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.