What are the maintenance items for 20,000 kilometers?

2 Answers
McDaniela
07/24/25 10:06am
The following is a detailed introduction to the 20,000-kilometer maintenance items for a car: 1. Replacement parts: Replace the air filter, oil filter, cabin air filter, engine oil, and spark plugs. 2. Cleaning: Clean the throttle body, fuel injectors, and catalytic converter. 3. Tire inspection: Check tire pressure and wear condition. 4. Exterior inspection: Inspect the paint and lights. 5. Battery check: Measure whether the battery voltage is normal. 6. Chassis: Inspect various parts of the chassis and suspension for abnormal oil leakage or looseness. 7. Fluid check: Inspect whether the brake fluid, coolant, and power steering fluid are at the proper levels.
Was this review help?
6
4
Share
DelHailey
08/11/25 5:16am
When the mileage reaches 20,000 kilometers, I believe maintenance should not be taken lightly. Generally, it's essential to change the engine oil and oil filter—this is fundamental because aged oil can affect the engine's lifespan. The air filter should also be inspected or replaced, as excessive dust can reduce engine performance. Tire wear and air pressure need careful checking, and the braking system requires maintenance, such as examining the thickness of the brake pads. Small details like lights and wipers shouldn't be overlooked either. Some car models may also need the cabin air filter replaced to improve air quality. It's a good habit to book an appointment with a 4S shop or repair shop in advance to avoid long waits. During every maintenance session, I personally check the tools in the trunk for added peace of mind when going on trips. Based on my experience, timely maintenance helps avoid costly major repairs.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

What to Do When the Honda CRV Sunroof Shade Clip Breaks?

Open the front sunroof to its maximum position to reveal the screws of the rear sunroof. Remove all four screws inside the sunroof, then take off the rear sunroof and remove the lower screws as well. Remove the original sunroof shade fabric, install the newly purchased sunroof shade, and then replace it with new clips.
6
2
Share

Can a Cracked Windshield Be Repaired?

A cracked windshield can be repaired depending on the severity of the crack. Some cracks are repairable, but only if the damage is limited to the outer layer of the glass. Generally, repairable crack types include star-shaped cracks and linear cracks. Cracks near the edges are more difficult to repair. Windshield Crack Repair Steps: Clean the damaged area with alcohol and glass cleaner, then blow away any small glass fragments to smooth the surface. Apply positioning paste from the repair kit. After positioning, drip glass repair fluid, being careful not to use too much. Prepare a syringe, pull it to the top, and block the syringe's bottom opening for about 10 minutes until all air bubbles escape. This ensures no air remains in the damaged area. Reinsert the syringe into the holder and press it downward to force the repair fluid into the crack. Maintain pressure for 15 minutes to allow the fluid to penetrate the crack. After 15 minutes, replace with a curing film and use a blade to remove any air bubbles. Note that the resin cures using sunlight's UV rays, not heat. Finally, park the car in sunlight for 15 minutes. Remove the cured film and scrape off excess adhesive with a blade. If your windshield has a crack, repair it as soon as possible. Otherwise, temperature fluctuations throughout the day can cause the glass to expand and contract, while wind resistance further stresses the damaged area, potentially worsening the crack. Delaying repairs may reduce effectiveness. Additionally, if the crack is too long, repair is not recommended as it may easily crack again later, compromising the windshield's strength and posing safety risks. In such cases, replacing the windshield promptly is advisable.
19
5
Share

How to reset the electric door of Trumpchi GM8?

Trumpchi GM8 electric door switch is located next to the roof light; When the electric door cannot be reset, it is likely that the electric door button has been turned off, switching from the original electric mode to manual mode; Press the electric door switch to turn on the electric mode.
12
5
Share

How to Reset After Replacing the Battery in a Land Rover?

Turn on the key with the engine off. Select the Land Rover menu and click on automatic search; Select "Special Functions", choose "Battery", click on Battery - Battery Replacement, then click OK, select the main battery, and turn on the ignition switch; For battery replacement, click OK, turn off the ignition switch, click OK again, the control module program will be successfully completed, click OK, and then repeat the ignition a few times.
18
0
Share

How to Press the Interior Trunk Button in Golf 8?

There is a storage compartment with a water trough on the door handle in the driver's cabin, which has a button that serves as the trunk opening key. The methods to open the Golf trunk are as follows: To open the tailgate with the car key, press the tailgate button on the car key for less than 1 second to unlock the tailgate; or hold the button on the car key until the tailgate automatically opens a few millimeters. Press the upper part of the Volkswagen logo with your thumb while flipping the lower part outward. Then, reach under the Volkswagen logo and lift the tailgate. The Golf's trunk has a capacity of 380L, which is 30L more than the previous model. The interior space is very flat, and the rear seats support a 4:6 split-folding ratio, allowing one side to seat passengers while the other side can connect with the trunk for storage, making it very flexible. When all rear seats are folded down, the trunk's maximum capacity can reach 1270L.
12
2
Share

How to Connect Jumper Cables for Car Battery?

When connecting jumper cables for a car battery, connect positive to positive and negative to negative. The red charging cable should be connected to the positive terminal of the rescue vehicle's battery. Connect the black end of the charging cable to the negative terminal of the rescued vehicle's battery or another suitable grounding point. Jump-starting method: First, open the engine compartment hood of your car by using the switch located below the steering wheel. Then, locate the battery position under the front hood and identify the positive and negative terminals. Connect the red cable to the positive terminal of the rescued vehicle first, then to the positive terminal of the rescue vehicle. Connect the negative terminal of the rescue vehicle to the negative terminal of the rescued vehicle. After starting the rescue vehicle's engine, start the rescued vehicle's engine, then remove the positive cable first followed by the negative cable. Let the rescued vehicle's engine run for a while to ensure the battery receives sufficient charge. Precautions for jump-starting: During the process, ensure the positive and negative cables do not come into contact, as this may cause a short circuit. Regularly check your car battery's condition during normal use, and promptly inspect if any issues arise.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.