What are the maintenance items for 100,000 kilometers?

3 Answers
PresleyMarie
07/29/25 9:47am
10,000-kilometer maintenance items include: changing the engine oil, oil filter, and cabin air filter, cleaning the engine intake and fuel system. Changing the engine oil and oil filter is a mandatory task for every maintenance service. Under the harsh conditions of high temperature and high pressure inside the engine, the shelf life of engine oil is significantly shortened, and its performance deteriorates substantially. Over time, it fails to provide adequate protection for the engine. The working principle of the cabin air filter is similar to that of the engine air filter. To ensure fresh air while using the car's air conditioning, the cabin air filter needs to be replaced regularly. In the braking system, special attention should be paid to the brake fluid and brake pads. Brake fluid is affected by environmental humidity, and over time, it can lead to reduced braking performance. The same applies to brake pads.
Was this review help?
13
2
Share
JamesMarie
08/13/25 11:27am
As a seasoned driver with ten years of experience, I believe that the 100,000-kilometer major maintenance is a critical milestone for a car's lifespan and should never be overlooked. Key tasks include changing the engine oil and oil filter to protect the engine from wear; replacing the air filter and cabin air filter to ensure proper airflow; inspecting and replacing spark plugs to prevent ignition issues that could lead to power loss; and changing the transmission fluid—especially important for automatic transmissions. Additionally, check the timing belt, as many cars are prone to belt aging and snapping at this stage. Don’t forget the coolant and brake fluid—the former prevents overheating, while the latter ensures the braking system remains safe and efficient. Also, inspect tire wear and consider a wheel alignment if necessary. Every time I perform this maintenance, my car runs smoother, avoids breakdowns, and enjoys a longer lifespan. Spending a bit more on professional maintenance is far more cost-effective than dealing with expensive repairs later.
Was this review help?
5
2
Share
Expand All
Freddy
10/06/25 7:45am
I drive an economical family car, and when it comes to the major maintenance at 100,000 kilometers, I prioritize saving money and practicality. The core items include changing the engine oil and oil filter, which should be done approximately every 5,000 kilometers; inspecting and replacing the air and fuel filters to help save fuel and avoid clogs; and replacing the spark plugs if they are worn out to prevent engine performance degradation. Additionally, the transmission fluid should be changed, which is especially important for automatic transmission cars. The brake pads should be checked for wear, as worn-out pads can damage the rotors. The cooling system, including the coolant and water pump, should also be maintained to prevent rust and overheating. Tire pressure and tread depth should be measured for safety. I usually go to a reputable shop to save on labor costs and compare online parts prices in advance to reduce expenses. After maintenance, the car accelerates more smoothly, fuel consumption decreases, and I feel confident taking long trips on weekends—small investments bring big returns.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

Where is the USB port of Baojun 730 located?

The USB port of Baojun 730 is located in the storage compartment under the center console. You can see it by opening the cover. Here is some information about the USB port: 1. The car USB port can be used to read USB drive information for the car entertainment system, charge mobile phones, etc. After inserting the USB drive into the USB port, you can play the songs in the USB drive by opening the music player in the car entertainment system. 2. Besides the USB port, the cigarette lighter can also be used to charge mobile phones, but a power converter is needed. Precautions for using the car charger: 1. Do not use the car charger in a humid environment. 2. Do not store the car charger in a humid environment. 3. The suitable temperature for use is 0-45℃. 4. Keep it away from children. 5. Avoid lightning strikes. 6. Unplug the charger in time after charging.
3
5
Share

How to Adjust the Time in a Verna Car?

Here are the steps to adjust the time in a Verna car: 1. Turn the key to the ACC position and hold the CLOCK button for a few seconds. 2. Enter the time adjustment mode and rotate the knob on the right. 3. After adjusting the hour, press the knob on the right once to proceed to minute adjustment. 4. Once adjusted, press the knob on the right again to complete the process. Additional Information: The Verna features smooth, flowing lines in its design, with a style that leans towards fashion, targeting young consumers. The inverted trapezoidal grille paired with sleek, diamond-shaped headlights enhances its modern appeal. The rear of the vehicle adopts a continuous taillight design, emphasizing the lines and contours. Overall, its exterior is more distinctive and exudes a stronger sporty vibe.
19
2
Share

How to Break in a New Volkswagen Tiguan L?

The following are methods for breaking in a new Volkswagen Tiguan L: 1. Warm up before starting: For fuel-injected cars, before starting, turn the key to the second position and wait for 5-10 seconds before ignition. This is because once the ignition is turned on, the fuel pump begins working to adjust oil pressure and fuel injection volume. Therefore, waiting a few seconds before starting helps protect the new engine. 2. Avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. 3. Avoid overloading: If a new car is driven at full load during the break-in period, it can cause damage to mechanical components. Therefore, within the first 1000 kilometers, domestic cars should not exceed 75%-80% of the rated load capacity. Extension: The break-in period for a new Volkswagen Tiguan L refers to the initial driving distance after the car leaves the factory, during which the engine components are smoothed out. The break-in mileage for a new car is generally between 1000 kilometers and 3000 kilometers.
2
5
Share

How to Turn On the Outlander's Headlights?

Here are the methods to turn on the Outlander's headlights: 1. The headlight switch is generally integrated into the lever-type switch on the left side of the steering wheel, although there are exceptions—some models feature a rotary knob switch. Simply turn or toggle the switch to the designated position, and the corresponding exterior lights will illuminate, with the corresponding indicator appearing on the instrument panel. 2. The high beams are typically activated by pushing the lever forward or inward. Pushing it forward turns the high beams on continuously. When using high beams, it is essential to turn them off when encountering oncoming traffic and only reactivate them after passing the other vehicle. This prevents your high beams from dazzling the other driver's vision and causing accidents, which is also a standard of courteous driving.
8
5
Share

What brand are the brakes on the Cadillac CT6?

The Cadillac CT6 uses TRW brake pads. The brake pads on the Cadillac CT6 can normally last for over 30,000 kilometers, with no fixed replacement interval. Cadillac CT6 brake pad replacement tutorial: 1. Connect the computer to the vehicle, locate the "Brake Pad Replacement Setting" and open the rear wheel brake caliper. Wait for five seconds until a sound indicates that the caliper has disengaged, meaning the brake motor has retracted. Be sure to open the brake fluid reservoir cap because brake fluid will flow back as the caliper retracts. 2. Then loosen the two nuts on the cover. If the caliper has not fully retracted, use a flathead screwdriver to pry it open slightly. 3. Open the outer cover of the brake caliper to install the new brake pads. The side with the text label should face outward, while the side without the production text label should face inward. 4. After installing the new brake pads, select "Close Rear Wheel Brake Caliper" in the settings. The brake motor will reset and extend in about 5 seconds.
13
5
Share

Does the Geely Binyue Three-Cylinder Engine Vibrate?

Geely Binyue three-cylinder engine does not vibrate. More information about the Binyue three-cylinder engine is as follows: 1. The Geely Binyue three-cylinder engine has adopted turbocharging, with a more reasonable layout and smaller mass. Although there is still some vibration, it is not significant, and the Geely Binyue three-cylinder engine runs very smoothly, providing a comfortable driving experience. 2. In terms of fuel consumption, the three-cylinder engine in the Geely Binyue is not high. Compared to some four-cylinder engines of the same displacement, this car's fuel consumption is even lower. Extension: The Geely Binyue is equipped with two turbocharged engines, a 1.0T and a 1.5T, both of which are three-cylinder engines. The maximum power outputs are 136 horsepower and 177 horsepower, respectively, and the maximum torque outputs are 205 Nm and 255 Nm, respectively.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.