What are the maintenance items at a car 4S shop?

2 Answers
VanKayden
09/03/25 4:01am
Car 4S shop maintenance items include: 1. Replacement of engine oil and transmission oil; 2. Replacement of spark plugs; 3. Replacement of oil filters, air conditioning filters, and air filters; 4. Cleaning of throttle valves and fuel injectors; 5. Checking brake fluid levels and for any leaks; 6. Adjusting brake pedal travel; 7. Topping up radiator coolant; 8. Adjusting ignition timing; 9. Checking the tightness of engine cylinder head bolts. Car maintenance refers to the regular preventive work of inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts, also known as car servicing.
Was this review help?
20
5
Share
VanSamantha
09/15/25 5:40am
During my first visit to the 4S dealership for car maintenance, the service staff enthusiastically introduced the basic items: changing the engine oil and oil filter is the most important, as they protect the engine from wear; followed by checking the air filter, replacing it when necessary to maintain clean air intake; they also helped me check the tire pressure and rotation position to extend their service life; additionally, they tested the braking system including the brake pads and fluid levels to ensure driving safety; lighting inspection to avoid nighttime accidents, plus topping up the coolant and windshield washer fluid. The entire process took about an hour, and the car ran smoother after the maintenance. New car owners are reminded to perform maintenance every 5,000 kilometers or six months, and not to delay, otherwise the engine noise may increase, affecting the driving experience. If the air conditioning cooling is insufficient, they will also add refrigerant or clean the pipelines.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

What to Do When the Car Cigarette Lighter Won't Pop Out?

Solutions for a car cigarette lighter that won't pop out: You can try pulling it out by hand, but avoid using excessive force. Gently rotate it while pulling vertically upwards. If the lighter is glowing red and functioning normally, it indicates that the spring clip in the socket is damaged. If it's not glowing red and simply won't pop out, it might be due to a blown fuse, causing the lighter to lose power and preventing it from ejecting properly. The cigarette lighter operates at 12 volts, matching the vehicle's battery voltage. Typically, the lighter has a dedicated power line connected to it, separate from other circuits, and thus has its own fuse. The correct usage method involves inserting and removing the lighter vertically without shaking it, as frequent wiggling during removal can lead to loosening, short circuits, and damage to the fuse or external devices.
10
3
Share

How to start the Roewe RX5?

Use the key to enter the vehicle, allowing the vehicle to detect the key. This enables the car to start normally. Press the brake pedal and press the one-touch start button located in the center of the vehicle to start the engine. Check the vehicle's dashboard to ensure there are no fault warnings, confirming that the vehicle is operating normally. Any faults detected could affect the car's movement. Press the electronic parking brake button to release it, then shift gears to begin driving. The vehicle will now start and move normally.
5
1
Share

How to start a Kia car when the key fob battery is dead?

Place the key near the push-button start for a while. Touch the button with the key. The Kia K3 is a compact car under Dongfeng Yueda Kia, and the 2021 Kia K3 is equipped with a 1.4L turbocharged engine.
13
3
Share

How to Remove the Rear Seats of a Kia?

On both sides of the rear seat headrests, near the windows, there are handles. Pull these handles. The backrest of the rear seat can be folded forward. For the cushion part of the rear seat, in most cases, you simply push the cushion towards the rear of the car and then lift it upwards to remove it.
12
4
Share

How to fold down the rear seats of a Kia Forte?

Purchase a 12mm T-socket wrench. Locate the fixing screws in the gap between the seat and the backrest, and the screws between the backrest and the door frame, then remove them. Feel for a latch under the seat, hold the latch and lift the seat directly upwards to remove it. Lift the backrest slightly (the back of the backrest is hooked on), then remove it after disengaging.
10
3
Share

How to align the camshaft small chain of Kia Sportage 2.0?

Use the timing disc to secure the timing wheel. Loosen the screw of the timing wheel shaft with a wrench. Find the colored timing chain tooth on the camshaft. Rotate the chain on the camshaft to align the tooth with the small dot on the wheel, ensuring correct timing alignment. Release the disc on the timing wheel shaft to complete the timing alignment.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.