···
Log in / Register

What are the maintenance items at a 4S shop?

5 Answers
DiFrancisco
07/29/25 6:27am

Regular car maintenance items are as follows: 1. Oil and oil filter replacement: This is maintenance for the lubrication system. These two items are the most basic and important. The function of the oil filter is to remove various impurities from the oil to ensure the normal operation of the lubrication system. The oil filter should be replaced together with the oil during an oil change. 2. Air filter replacement: The cabin air filter is related to the air quality inside the car. It should be replaced according to the cycle specified in the maintenance manual during maintenance. 3. Adding windshield washer fluid, antifreeze, and air conditioning refrigerant. 4. Spark plug replacement: Replace every 20,000 km. In addition, components such as brake fluid, transmission oil, battery, and fuel injectors are inspection items during regular maintenance, and maintenance should be performed based on usage conditions.

Was this review help?
10
1
Share
SanJuliana
08/12/25 9:58pm

There are quite a few maintenance items at the 4S dealership, and I often take my beloved car there for servicing. They start with the basics, like changing the engine oil and oil filter, which is crucial for ensuring smooth engine operation. Next is the inspection of the braking system, checking the thickness of the brake pads and the level of brake fluid to guarantee stopping power when it matters most. Tires are also a key focus, with pressure checks, wear assessments, and even wheel alignment to prevent drifting. Lighting tests are a must—headlights and turn signals need to be bright and functional; wiper blades are cleaned or replaced for clear visibility during rain. Additionally, there's the cooling system and electrical checks, such as topping up coolant and measuring battery voltage. After each service, the car accelerates more smoothly, fuel consumption stabilizes, and I believe regular maintenance extends the car's lifespan, saving money on major repairs down the line. I strongly recommend not overlooking the cleaning of the cabin air filter—it protects the interior air quality during both summer and winter seasons.

Was this review help?
17
5
Share
Expand All
SanMaggie
10/04/25 3:17am

As a family car owner who regularly maintains my vehicle at 4S shops, I prioritize safety and comfort items. They perform oil changes to lubricate the engine, replacing the oil filter as well. Brake inspection is core, including brake disc wear assessment and fluid level adjustment. Tire pressure adjustment and tread inspection prevent skidding. The lighting system tests all light functions. They also take a quick look at the cooling system to ensure sufficient coolant and prevent engine overheating. For electrical aspects, the battery is tested for voltage and charging status. On the comfort side, the AC filter is replaced or cleaned to improve air quality; wiper maintenance ensures safety in rain. I believe these basic items make driving more reassuring, especially when carrying family. Don't forget to ask about other potential issues, like minor suspension or belt checks. Spending a little time on each maintenance visit can avoid the embarrassment of breaking down midway.

Was this review help?
12
2
Share
Expand All
ONevaeh
11/17/25 4:52am

I'm quite familiar with the maintenance items at the 4S shop, as I've been taking my new car there regularly. The basics include changing the engine oil and filter to keep the engine lubricated. Tires are checked for pressure and wear, and rotated if necessary. The brake system is inspected for pad thickness and fluid level. Lights are tested to ensure headlights and turn signals are working. Wipers are cleaned to prevent scratches. The battery voltage is simply measured. Coolant levels are topped up or replaced. Overall, it ensures the car runs smoothly and safely. After each service, the car drives much more steadily. It's recommended to do this at least once a year and not to skip it.

Was this review help?
19
5
Share
Expand All
Orville
01/07/26 6:29am

From an automotive enthusiast's perspective, 4S shop maintenance covers everything from the engine to performance details. Oil and filter changes are the starting point, lubricating internal components. A thorough brake inspection checks pad/disc wear and tests braking response. Tire pressure balancing and tread wear evaluation impact handling. Comprehensive lighting system diagnostics include headlight brightness adjustment. Cooling system checks examine radiator and fluid levels to prevent overheating. Electrical battery status is monitored. They'll also inspect spark plugs or belt conditions if the engine sounds off. These measures enhance vehicle performance, boosting confidence on long drives. I enjoy asking technicians about headlight alignment specifics to ensure optimal nighttime visibility. Regular maintenance offers high return on investment.

Was this review help?
15
2
Share
Expand All
More Forum Discussions

Where to add water to the Chevrolet Malibu XL radiator?

Steps to add water to the Malibu XL radiator are as follows: 1. Turn the pressure cap counterclockwise. If a hissing sound is heard, wait until the sound disappears before opening; 2. Add an appropriate amount of coolant into the coolant expansion tank, ensuring the level is between the MAX and MIN marks on the tank; 3. Start the engine with the coolant expansion tank cap open; 4. After starting the engine, the coolant level in the tank will gradually decrease. At this point, add an appropriate amount of coolant to the expansion tank until the level reaches between the MAX and MIN marks on the coolant expansion tank; 5. Reinstall the cap, ensuring the pressure cap is hand-tightened and fully seated.
18
4
Share

What Causes Abnormal Noise in Car Air Conditioners?

Reasons for abnormal noise in car air conditioners: 1. Lack of lubricating refrigerant oil inside the compressor, causing metal friction sounds when the compressor's electromagnetic clutch engages. 2. Abnormal noise due to excessive tension on the air conditioning belt. 3. Faulty electromagnetic clutch, with damaged internal bearings producing abnormal noise. The following is an introduction to the car air conditioning system: The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle. It includes cooling devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, with a simple structure that is easy to operate. The air conditioning system can provide a comfortable environment for passengers and reduce driver fatigue.
12
2
Share

Will there be any problems if the Verano's chassis is hit while driving?

Hitting the chassis while driving the Verano can cause problems. Below are the main impacts of chassis scraping during driving: 1. Fuel tank - Impact can deform the fuel tank. 2. Wiring - Some wiring is located on the chassis, which may lead to wiring failures. 3. Exhaust pipe - Frequent impacts can damage the exhaust pipe. 4. Engine oil pan - Wear can affect engine performance. Here is additional information: 1. The chassis typically refers to the automobile chassis, which is the main framework of the vehicle's underside. All power components of the vehicle, including the engine, transmission, differential, and suspension system, are installed on the chassis. 2. The chassis serves to support and install the car engine and its various components and assemblies, forming the overall shape of the vehicle. It receives the engine's power to enable movement and ensure normal driving. Additionally, a good chassis can safeguard the driver's life.
8
1
Share

How to turn on the rear wiper of Honda CR-V

Here are the methods to turn on the rear wiper of Honda CR-V: 1. Push the wiper lever backward (press down to the first gear) to activate the rear window wiper. 2. Lift the wiper lever upward to activate the front wiper spray, and pull the wiper lever downward to activate the rear wiper spray (for cleaning the glass water). More information about Honda CR-V is as follows: 1. Honda CR-V is a compact SUV with a 1.5T L4 engine and turbocharged intake. 2. The dimensions of this car are 4621mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. The body type is a 5-door, 5-seat SUV, equipped with a 6-speed manual transmission and front-wheel drive.
9
1
Share

Why Can't the Car Key Be Turned?

Reasons why the car key can't be turned: The car key may not turn because the steering wheel has automatically locked. This is part of the car's automatic anti-theft system. When the vehicle is turned off, the steering lock pin engages with the steering column, preventing the steering wheel from moving. Even if the key is inserted, it cannot be turned. This is a safety feature designed to protect the vehicle. Here are some solutions: If the car key cannot be turned, you can unlock the steering wheel by inserting the mechanical key, pressing the brake pedal, and then gently turning the steering wheel. Although the steering wheel is locked, it can still be moved slightly. While turning the steering wheel, turn the key at the same time to complete the steering wheel unlocking process. At this point, the vehicle can be started normally.
16
5
Share

How to Replace Brake Pads on a Mercedes-Benz C200?

Mercedes-Benz C200 brake pad replacement steps are as follows: 1. Remove the tire. 2. Loosen the caliper fixing screws and remove the caliper. 3. Release the brake pad clips and take out the brake pads. 4. Use large pliers or a specialized piston pushing tool to push the caliper piston back. 5. Install the new brake pads. 6. Secure the clips and reassemble following the original steps. Additional relevant information is as follows: 1. Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking is decisively influenced by the brake pads, making high-quality brake pads the protector of both the driver and the vehicle. 2. Brake pads generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 oven temperature tracker to ensure the temperature distribution during coating meets quality standards.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.