What are the maintenance details for each stage of a car?

2 Answers
VonKira
09/03/25 5:20am
Here are the specific details of car maintenance: 1. Vehicle appearance: (1) Clean the body, windows, and light covers to remove dust and sand particles, preventing paint erosion. (2) Check the depth of tire treads, whether the tire pressure is normal, and if the screws are tight. (3) Inspect the sealing of the engine intake pipe and whether the air filter has any issues. (4) Check if the battery electrolyte is sufficient, if the terminal connections are tight, and if the vent holes are blocked. (5) Inspect the dashboard, wipers, and lighting system for any faults. 2. Parts: (1) Replace the air filter every year or 10,000 kilometers. (2) Replace the cabin air filter every year or 20,000 kilometers. (3) Replace the oil filter every six months or 5,000 kilometers. (4) The replacement cycle for spark plugs depends on the material: nickel alloy spark plugs should be replaced every 20,000-30,000 kilometers; platinum spark plugs every 30,000-50,000 kilometers; and double platinum spark plugs every 80,000 kilometers.
Was this review help?
10
2
Share
MacLukas
09/15/25 6:50am
I always pay close attention to car maintenance since I want to save both trouble and money in the long run. For the first 5,000 kilometers or six months after getting a new car, remember to change the engine oil and oil filter to protect the engine from premature issues. At 10,000 kilometers or one year, besides replacing the oil, you should also check tire wear, the braking system, and lighting functions to ensure safe driving. When reaching 20,000 kilometers or two years, it's time for a major service—replacing the air filter and cabin air filter, as well as inspecting or changing the brake fluid and coolant to prevent failures at critical moments. For cars over 40,000 kilometers, which are a bit older, focus on drivetrain lubrication, and don’t skip the transmission fluid change, or you’ll face increased noise and fuel consumption. Regular maintenance not only extends your car’s lifespan but also saves you from costly repairs. I keep track of each stage in a notebook to remind myself.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

Is it necessary to repaint the front and rear bumpers of a car after scratches?

It is not necessary to repaint the front and rear bumpers of a car after scratches. Here is a detailed introduction about car paint: 1. Overview: The main function of car paint is to protect the car body from corrosion. In addition, car paint can also enhance the aesthetic appeal of the vehicle. Car paint is a type of coating. The purpose of a paint booth is to provide a clean, safe, and well-lit painting environment for car painting, ensuring that the painting process is free from dust interference and guaranteeing the quality of the paint job. 2. Composition: Car paint mainly consists of resin, pigment, additives, fillers, curing agents, solvents, etc. Metallic car paint usually includes reflective metallic flakes (aluminum powder), while pearlescent paint typically contains mica particles.
7
0
Share

What are the speed requirements for a 3-lane highway?

For roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, with a maximum speed of 120 km/h. The middle lane has a minimum speed of 90 km/h. The rightmost lane has a minimum speed of 60 km/h and a maximum speed of 120 km/h. Other lane speed limits: 1. For roads with two lanes in the same direction, the left lane has a minimum speed of 100 km/h and a maximum speed of 120 km/h. 2. For roads with four lanes in the same direction, the leftmost lane has a minimum speed of 110 km/h and a maximum speed of 120 km/h, the middle lane has a minimum speed of 90 km/h and a maximum speed of 120 km/h, and the rightmost lane has a minimum speed of 60 km/h and a maximum speed of 120 km/h.
8
2
Share

How Long After Production Date is a Domestic Car Considered a Stock Vehicle?

Domestic cars are considered stock vehicles if their production date exceeds 3 months. Below are relevant details about stock vehicles: 1. Introduction: There is no clear legal definition for stock vehicles, but the term "stock vehicle" does exist in the automotive sales industry, generally referring to cars that remain unsold for over a year. 2. How to Identify: Actually, there's no need to identify whether a car is a stock vehicle. For one, the vehicle's manufacturing date is clearly stated on its nameplate; for another, dealers won't conceal the identity of a stock vehicle because it's impossible to hide. What needs to be determined is whether the vehicle has been properly maintained and cared for during its stock period.
19
4
Share

What is the battery model for Mercedes-Benz remote control?

Most Mercedes-Benz key fobs use the 3V CR2025 battery model. For vehicles of the same era, whether it's a C-Class, E-Class, or S-Class, their key fobs are essentially the same, and the battery replacement methods are largely identical. The typical lifespan of a Mercedes key fob battery is about two years, while original factory batteries can last up to six years. Here are the warning signs when your Mercedes key fob battery is running low: 1. When you press the ignition switch, the dashboard will display a "Replace Key Battery" message. 2. Press the lock and unlock buttons on the key fob. If the indicator light on the key becomes dim or doesn't illuminate, it's time to replace the battery.
11
3
Share

Where Can I Rent a Manual Transmission Car?

Car rental apps can rent manual transmission cars. Information about manual transmission cars is as follows: 1. Manual Transmission (MT): Also known as manual gearbox, it requires manually shifting the gear lever to change the gear meshing device inside the transmission, altering the gear ratio to achieve speed variation. 2. Composition: The manual transmission mainly consists of gears and shafts, achieving speed and torque variation through different gear combinations. The principle of manual transmission cars is as follows: 1. Speed and Torque Variation: The pump wheel and turbine form a working pair, similar to two fans placed opposite each other. The wind blown by one fan drives the blades of the other, with wind serving as the medium for kinetic energy transfer. If liquid replaces air as the medium, the pump wheel drives the turbine to rotate via the liquid. Adding a guide wheel between the pump wheel and turbine creates a speed difference through reaction force, enabling speed and torque variation. 2. Manual Gear Lever: Marked P (Park), R (Reverse), N (Neutral), D (Drive), with additional "2" and "1" gears in the drive position for starting or climbing slopes.
10
3
Share

Which warning light indicates an abnormality or malfunction in the engine control system?

The engine check light indicates an abnormality or malfunction in the engine control system. Here is some information about the engine check light: 1. Car engine check light: The meaning when the light is on is an indicator of the engine's working condition. It lights up when the ignition is turned on and goes off after about 3-4 seconds if the engine is normal. 2. Function: It is used to alert the driver whether there is a fault in the engine, and a self-check is performed every time the vehicle is started. The reasons for the engine check light to illuminate are as follows: 1. Sensor issues: Including water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine check light to illuminate. 2. Maintenance issues: Poor engine maintenance is the most common cause of the engine check light illuminating. 3. Poor combustion of the air-fuel mixture: Faults in the engine's spark plugs, ignition coils, fuel pump, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Poor combustion leads to engine carbon buildup or knocking problems, which are eventually detected by the oxygen sensor in the exhaust system. After reporting to the ECU, the engine check light will illuminate as a warning.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.