What are the main penalty points for C1 Subject 2?

1 Answers
OTimothy
07/30/25 5:12am
C1 Subject 2 examination penalty standards are: not following the prescribed route sequence when reversing into the garage, 100-point deduction; not completely reversing into the garage, 100-point deduction; vehicle body crossing the line, 100-point deduction; stopping midway, 100-point deduction. During right-angle turns, any wheel pressing the road edge line results in a 100-point deduction; stopping midway, 100-point deduction. For parallel parking, after the vehicle stops in the garage, if the body crosses the line, 100-point deduction; wheels touching or pressing the lane boundary line while moving, 10-point deduction; not parking within the garage, 100-point deduction; not turning on the left turn signal when starting, 10-point deduction; not turning on the right turn signal when reversing, 10-point deduction; stopping midway, 100-point deduction. For curve driving, wheels pressing the edge line, 100-point deduction; stopping midway, 100-point deduction. For fixed-point parking and slope starting, not parking at the fixed point, 100-point deduction; after the vehicle stops, if the front bumper does not reach the control line, 100-point deduction; rolling back more than 30 cm after stopping, 100-point deduction; rolling back less than 30 cm after stopping, 10-point deduction; not turning on the left turn signal when starting, 10-point deduction; pressing the solid edge line of the road while moving, 100-point deduction; after the vehicle stops, if the front bumper does not reach the parking line, 10-point deduction; when parking, if the right front wheel is more than 30 cm from the edge line, 10-point deduction; taking more than 30 seconds to start, 100-point deduction. Age requirements for C1: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants over 70 years old must pass tests on memory, judgment, and reaction abilities.
Was this review help?
11
2
Share
More Forum Discussions

How to Check ETC Records?

To check ETC records, follow these steps: 1. Open the search bar on your mobile device and enter the name of the local ETC official account; 2. Enter the official account, click on "Add More Accounts," and then click on "Bind User Account"; 3. Fill in the user name and ID number, then click on "Bind ETC Card Account" and enter the ETC card number and license plate number; 4. After successfully binding the account, return to the homepage, click on "My Services," and then "Monthly Bill" to check the records. ETC (Electronic Toll Collection) is a non-stop electronic toll collection system, also known as an automatic road payment system. It is a road toll method specifically designed for toll roads, commonly used on highways, bridges or tunnels with toll policies, and some sections of urban centers to alleviate traffic congestion.
3
5
Share

Where is the Buick Excelle factory located?

Buick Excelle factory is located in Wuhan. The Buick Excelle is a compact car. Taking the 2021 Buick Excelle as an example, its body dimensions are: length 4609mm, width 1798mm, height 1464mm, wheelbase 2640mm, fuel tank capacity 44l, and curb weight 1270kg. The 2021 Buick Excelle features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113ps, maximum power of 83kw, and maximum torque of 141nm, paired with a 6-speed automatic transmission.
18
1
Share

What is the actual fuel consumption per kilometer for the BYD Song 1.5T?

The actual fuel consumption per kilometer for the BYD Song 1.5T is approximately 0.1 liters, with a real-world fuel consumption of around 10 liters per 100 kilometers. Taking the 2021 BYD Song 1.5T as an example, its body dimensions are: length 4600mm, width 1830mm, height 1700mm, with a wheelbase of 2660mm, a fuel tank capacity of 63 liters, and a curb weight of 1630kg. The 2021 BYD Song 1.5T features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 160PS, a maximum power of 118kW, and a maximum torque of 245Nm, paired with a 6-speed manual transmission.
5
4
Share

Where is the transmission oil filler port on the Honda Lingpai?

The transmission oil filler port on the Honda Lingpai is located on the oil pan, and the filler port and oil level inspection port are the same. Taking the 2020 Honda Lingpai as an example, its body structure is a 4-door, 5-seater sedan with dimensions of 4756mm in length, 1804mm in width, and 1509mm in height, with a wheelbase of 2730mm. The 2020 Honda Lingpai features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109PS, a maximum power of 80kW, and a maximum torque of 134Nm, paired with an electronic continuously variable transmission (CVT).
4
4
Share

What is the reason for the hissing sound when stepping on the brake?

The reasons for the hissing sound when stepping on the brake are: 1. It is the sound made by the movement of the master cylinder core and the booster pump, which is a normal phenomenon; 2. It is the sound of air leakage from the booster package, which needs to be repaired in time, and the booster assembly should be replaced. The function of the brake is to reduce the speed or stop the vehicle. Its working principle is to use the friction between the brake pads and the brake drum, as well as the friction between the tires and the ground, to convert the kinetic energy of the vehicle into heat energy after friction, thereby slowing down or stopping the vehicle. The reasons for brake failure are: 1. There are impurities in the master cylinder and the seal is not tight; 2. The vacuum booster pump fails; 3. The brake oil is too dirty; 4. The master cylinder or sub-pump leaks oil; 5. The air tank or pipeline interface leaks air; 6. Severe overload; 7. The brake drum is carbonized; 8. The master cylinder lacks brake fluid; 9. The piston of the master cylinder is worn.
15
1
Share

Where is the cabin air filter located in the Mercedes-Benz V260?

The cabin air filter in the Mercedes-Benz V260 is located inside the glove compartment on the passenger side. Simply open the glove box to access it. Taking the 2020 Mercedes-Benz V260 as an example, its body dimensions are: length 5140mm, width 1928mm, height 1880mm, with a wheelbase of 3200mm. The 2020 Mercedes-Benz V260 features a MacPherson strut front suspension and a semi-trailing arm independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 211PS, a maximum power of 155kW, and a maximum torque of 350Nm, paired with a 9-speed automatic transmission.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.