What are the main items included in new car maintenance?

1 Answers
VonAsher
07/29/25 12:52pm
Generally speaking, car maintenance mostly refers to changing engine oil, replacing various filters, and cleaning carbon deposits. Below is an introduction to relevant knowledge about car maintenance: 1. Definition: Car maintenance refers to the periodic preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. 2. Purpose: The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. 3. Precautions: The car engine should be cleaned at an appropriate time. Prolonged use can form a thick layer of carbon deposits on the engine surface, which can significantly corrode the rubber components in the engine.
Was this review help?
9
1
Share
More Forum Discussions

Can a Car That Uses 95 Octane Gasoline Also Use 92 Octane?

A car that uses 95 octane gasoline can occasionally use 92 octane, but it should not be done frequently. Here is some information about gasoline octane ratings: Gasoline octane ratings represent the octane value of the gasoline. 1. For 92 octane gasoline, the isooctane proportion is about 92%, and the heptane proportion is about 8%. 2. For 95 octane gasoline, the isooctane proportion is about 95%, and the heptane proportion is about 5%. Additional information: Rules for selecting gasoline octane ratings: 1. For a compression ratio of 7.5-8.0, use 90-93 octane gasoline. 2. For a compression ratio of 8.0-8.5, use 90-93 octane gasoline. 3. For a compression ratio of 8.5-9.0, use 93-95 octane gasoline. 4. For a compression ratio of 9.5-10.0, use 95-97 octane gasoline.
3
0
Share

How Many Cylinders Does the Fit Have?

It is a four-cylinder car. The specific details of this car are as follows: 1. The Fit is a compact car under Honda, with a wheelbase of 2530 mm, and dimensions of 4109 mm in length, 1694 mm in width, and 1537 mm in height. 2. This car is equipped with Honda's 1.5-liter naturally aspirated four-cylinder Earth Dreams engine. 3. The engine code is L15BU, with a maximum power of 96 kW, a maximum torque of 155 Nm, a maximum power speed of 6600 rpm, and a maximum torque speed of 4600 rpm. 4. It features i-VTEC technology and direct fuel injection, and uses an aluminum alloy cylinder head and block, which significantly reduces the engine's weight, improving the car's fuel efficiency and handling.
6
4
Share

How to Perform the First Maintenance for a New Car?

The first maintenance for a new car is typically due at around 3,000 kilometers or three months, whichever comes first. Some brands may require the first service at six months or 5,000 kilometers, also whichever comes first. Below is an introduction to the first maintenance for a new car: 1. The primary tasks of the first maintenance include changing the engine oil and replacing the oil filter. After a month or 3,000 kilometers of driving, the engine oil will inevitably contain some residue. Replacing it with fresh oil will help the vehicle achieve optimal performance. 2. The first maintenance involves multiple inspection items, such as checking the vehicle's lights, tires, chassis, various fluid levels in the engine compartment, and the onboard computer system. The most crucial step is replacing the engine oil and oil filter, which is the most valuable part of the first maintenance. Normally, the first maintenance includes a comprehensive check and diagnosis of the vehicle's condition and usage. Typically, the first maintenance is free of charge. If the technician suggests additional services not included in the first maintenance, the owner should inquire whether these services are chargeable before deciding whether to proceed. 3. Before the first maintenance, it is advisable to make an appointment with the 4S store in advance to avoid delays. Essential items such as the maintenance manual and vehicle registration should be brought along. Other required documents should be clarified during the appointment.
3
3
Share

How to Activate the Pre-Collision Function in Geely Boyue?

Here are the activation steps: 1. Start the vehicle and power it on. 2. Locate the button on the left side of the steering wheel and press the left directional button once. 3. In the instrument panel settings, find PCS (Pre-Collision System) and confirm. 4. Press and hold the central OK button to enter PCS sensitivity adjustment, where you can choose from 3 levels, then click OK to confirm. The pre-collision system can detect obstacles ahead and calculate the likelihood of a collision. If it determines a high probability of collision, it will sound an alarm. When the system judges that a collision is unavoidable, it will pre-tighten the front seat belts and activate braking to minimize collision damage. The concept of the PCS pre-collision system is to prevent problems before they occur, making full use of the time before a collision to avoid it as much as possible. Once a collision is inevitable, it will take protective measures in advance to maximize driver safety.
6
0
Share

What kind of car is Pagani?

Pagani is a world-renowned supercar manufacturer, founded in 1982 and headquartered in Modena, Italy, specializing in the production of supercars and professional racing cars. Pagani's sports cars are widely recognized for their exquisite craftsmanship, often handcrafted, with each model in a series bearing unique numbering. Pagani also offers customization services, allowing owners to tailor their vehicles according to personal preferences. Notable models in the Pagani lineup include the Pagani Zonda F Clubsport, Pagani Huayra Roadster, Pagani Zonda F Roadster Clubsport Ultimate Edition, and the Huayra.
5
1
Share

What does quattro mean?

Quattro, meaning permanent four-wheel drive, is a registered trademark of Audi's four-wheel-drive technology under the Volkswagen Group. Here is an introduction to Quattro: 1. Quattro stands for a full-time four-wheel-drive system, which maintains a four-wheel-drive state under all conditions. During turns, the Torsen differential allows a certain speed difference between the front and rear axles, avoiding the interference phenomenon common in traditional four-wheel-drive systems. The core of Quattro's full-time four-wheel drive is the Torsen central differential, which adjusts the power distribution between the front and rear axles faster than any electronic control technology. 2. How Quattro works: When external conditions cause speed differences between the front and rear axles, the Torsen differential automatically and efficiently transfers most of the power to the axle with better traction, optimizing and distributing power to all four wheels. Due to the balanced distribution of axle load, drivers can achieve better steering precision and flexibility without the need for torque steering assistance. 3. Four brakes ensure braking effectiveness, while four driven wheels provide acceleration and higher cornering stability. Audi's Quattro full-time four-wheel drive is a systematic application of these fundamental physical principles. 4. Quattro technology continuously distributes driving force between the front and rear axles based on driving conditions and road surfaces, especially on slippery roads, ensuring superior traction and safe driving even when two driven wheels lose grip.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.