What are the main issues with the BMW X1?

1 Answers
McAnderson
07/30/25 1:56am
BMW X1 main issue is door noise. The reasons for door noise are as follows: Noise from the door panel: When driving on bumpy roads, the wiring harness inside the door may hit the door panel, causing continuous noise. To eliminate this, remove the door trim panel, secure the wiring harness inside, and it's best to attach a small piece of sponge to the door panel where the wiring harness is located. Noise from the door seal: After prolonged use, the door seal may gradually age, causing friction between the seal and the car body, which can result in noise while driving. Replacing the seal with a new one can resolve this issue.
Was this review help?
1
4
Share
More Forum Discussions

How to Replace the Rubber Blade of a Wiper?

Before replacing the rubber blade of the wiper, you need to remove the wiper first. Check which end of the wiper's rubber blade cannot slide back and forth. Remove the clip that secures this end. Take off the rubber blade. Install the new wiper.
18
0
Share

How to Connect Bluetooth in Golf 7?

From the panel of the car's multimedia system, locate the Bluetooth function switch and turn on the car's Bluetooth; Activate the Bluetooth function on your phone and set the phone's Bluetooth to 'Visible to All' or make it discoverable or open for detection; Search for Bluetooth devices on your phone, and once found, select it to pair and connect.
16
4
Share

How to Replace the Air Conditioning Filter in a Santana?

When replacing the air conditioning filter, it is necessary to remove the glove compartment first. After removing the glove compartment, locate a horizontally placed cover. Both sides of this cover can be pried open by gently pulling them outward. Once the cover is opened, you can see the air conditioning filter inside, which can then be taken out. Insert the new air conditioning filter into place.
10
3
Share

How to Open a Locked Car?

If only the commonly used key is lost, use the spare key to send the car to a repair shop for assistance. If cost is not a concern, it is recommended to choose a 4S shop for repairs; otherwise, seek a professional company in the industry. The best solution is to replace all the car locks, which is a permanent fix, though the cost is considerable.
19
2
Share

How to adjust the audio effects of Cadillac XTS?

Turn on the music. The BOSE AudioPilot function automatically compensates for music frequency gain based on noise, essentially acting as a fully automatic sound tuner. There is a menu in the lower right corner of the screen for tone settings. Simply increase the treble. Generally, set the treble and midrange to maximum, while the bass can be adjusted as preferred.
6
2
Share

How to Reset the Service Wrench on Emgrand GS?

Turn off the ignition switch, and simultaneously press and hold the two arrow buttons, then turn on the ignition switch. After the ignition switch has been on for about 3 seconds, release the two arrow buttons. At this point, the display will show the maintenance menu, indicating whether to reset. Press and hold the SET (reset) button for more than 3 seconds, then press the MODE (mode) button. Turn off the ignition switch to complete the reset.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.