What are the main functions of tires?

1 Answers
DelCollin
07/30/25 2:18am
The main functions of tires: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions; 2. Transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power performance, braking performance, and passability; 3. Work together with the car suspension to mitigate the impact during driving and dampen the resulting vibrations; 4. Prevent severe vibrations and early damage to car components, adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy-saving economy.
Was this review help?
19
0
Share
More Forum Discussions

Do You Need to Keep Your Foot on the Accelerator While Driving?

Whether you need to press the accelerator while driving depends on the road conditions: 1. During driving, if there is no need to slow down or stop, your right foot should remain on the accelerator pedal (vehicles with cruise control do not require continuous pressing of the accelerator pedal once cruise control is activated). 2. During driving, if you need to slow down or stop, your right foot should be moved away from the accelerator pedal and, if necessary, press the brake pedal. If you are preparing to stop, your right foot should be moved away from the accelerator pedal and then press the brake pedal. After coming to a complete stop, if you do not intend to turn off the engine, there is no need to press the accelerator pedal, as the engine will automatically idle.
13
5
Share

What kind of engine oil should be used for the Great Wall Fengjun 5 diesel version?

Great Wall Fengjun 5 diesel version can use C35W-30 engine oil. Here is some introduction about engine oil: 1. Engine oil: also known as engine lubricant, it can lubricate and reduce wear, assist in cooling, seal and prevent leakage, prevent rust and corrosion, and cushion shocks for the engine. 2. Composition of engine oil: the base oil of engine oil currently in use is composed of hydrocarbons, poly-alpha-olefins (PAO), and poly-internal-olefins (PIO), all of which are organic compounds made up of carbon and hydrogen. 3. Engine oil viscosity standard: SAE (Society of Automotive Engineers) viscosity classification is used to distinguish the different temperature ranges suitable for lubricating oils.
2
2
Share

Does the Throttle Need Cleaning?

The throttle needs cleaning, and the cleaning cycle is approximately every 20,000 to 30,000 kilometers. Steps to clean the throttle: 1. Open the car's engine hood, locate the black air pipe connector where there is a metal component secured with a metal clamp—this is the throttle; 2. Use a screwdriver to loosen the metal clamp on the throttle. It doesn't need to be completely removed, just loosened sufficiently. Then, remove the plastic tube connected to the throttle; 3. After removing the throttle, the inside will be visible, covered in oil stains and carbon deposits. Take out the throttle cleaner, spray it inside the throttle a few times, and watch as the oil stains and carbon deposits dissolve; 4. Wipe it clean with a paper towel, then use your finger or another object to push open the movable baffle inside the throttle. Spray a few more times inside and wipe clean again with a paper towel; 5. Once cleaned, reassemble everything in reverse order. Start the car and let the engine run for a while to expel any remaining debris from the throttle.
2
1
Share

How to Open the Front Hood of a Volkswagen Bora?

To open the front hood of a Volkswagen Bora, follow these steps: 1. Enter the driver's cabin of the Volkswagen Bora and locate the hood release lever near the foot pedals. Manually pull the lever to release the hood. 2. Press the release button located on the left side of the foot pedals to open the front hood from the outside. 3. You will notice a small gap appearing on the front hood of the Volkswagen Bora, indicating that the hood has been successfully released. 4. Insert the hydraulic strut into the designated slot on the hood to support it. Lift the front hood of the Volkswagen Bora and secure it with the support rod.
6
2
Share

What Causes the Engine to Make Noise When the Car's Air Conditioner is On?

There are several reasons why the engine makes noise when the car's air conditioner is on: If the sound is not particularly loud, it is a normal phenomenon. This is because turning on the air conditioner increases the engine load, and the fan operates at high speed, resulting in louder noise. If the sound is particularly loud, there are several possible reasons: 1. Abnormal noise from the air conditioning pump. Any issue with the electromagnetic clutch or the bearings inside the air conditioning pump can cause abnormal noise. Noise from the electromagnetic clutch is mainly due to wear, which increases the gap, while noise from the air conditioning pump bearings is usually caused by a lack of lubrication. In severe cases, this can lead to the air conditioning pump burning out, rendering the cooling system inoperable. 2. Dirty or stuck throttle. Turning on the air conditioner increases the engine load, requiring the throttle to open wider to allow more air intake. If the throttle has carbon buildup or is stuck, it can cause engine vibration and abnormal noise. 3. Improper tension of the compressor drive belt. If the drive belt tension is incorrect, it can cause abnormal noise or even damage the air conditioning compressor. The principle is that if the drive belt is too loose, the electromagnetic clutch will slip. If the drive belt is too tight, the load on the electromagnetic clutch will increase.
20
1
Share

What is the method to reset the maintenance light on the Lancer?

The specific method to reset the maintenance light on the Lancer is as follows: Start the car and power on the dashboard. Press and hold the button on top of the Lancer's wiper for about ten seconds, and the maintenance light on the dashboard will be reset. When the maintenance light on the Lancer's dashboard illuminates, it indicates that the vehicle requires maintenance. The routine maintenance includes the following three items: 1. Replace the engine oil, oil filter, and air filter. 2. Replace consumable rubber parts and slowly wearing components. 3. Conduct a comprehensive inspection of the vehicle and repair any worn areas.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.