What are the main function keys of the 11th generation Odyssey?

2 Answers
LeVivian
07/24/25 2:57pm
Here is an introduction to the main function keys of the 11th generation Odyssey: 1. Vehicle Stability Assist (VSA): Can be manually turned off in conditions such as rain, snow, or muddy roads. It is generally recommended to keep it on during normal driving to prevent skidding or fishtailing. 2. Hazard Warning Lights: Should be activated in emergencies to flash the hazard lights, alerting other vehicles to prevent rear-end collisions. 3. Parking Sensors/Camera: This button activates the panoramic camera and parking sensor functions, providing audible alerts and visual feedback to help the driver detect surrounding obstacles. 4. Auto Hold: Eliminates the need to keep the foot on the brake pedal; the system automatically locks the wheels. The electronic parking brake will release the wheels when the driver presses the accelerator pedal again. 5. Auto Start-Stop: When activated, the engine will temporarily shut off. The vehicle will restart when the driver's foot leaves the brake pedal.
Was this review help?
4
5
Share
MayaMarie
08/11/25 8:37am
I have been driving an 11th-gen Odyssey for five years and find the function buttons very user-friendly, frequently used in daily driving. There are several key buttons on the steering wheel: the volume adjustment buttons on the left can turn the music volume up or down, while the buttons on the right control audio channel switching or Bluetooth call answering, and also integrate cruise control buttons to activate the speed-maintaining function for effortless driving. The central console area has multiple air conditioning buttons for adjusting temperature, fan speed, and cooling/heating modes; the audio system buttons allow switching between radio, CD, and USB inputs. The inner door panel features window control buttons and a door lock button for safe and convenient one-touch operation; the left stalk controls low/high beam lights, while the right stalk manages wipers and washer. There’s also a folding button below the rearview mirror—the overall layout is logical and minimizes driving distractions.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

At what level of wear should a wire rope be scrapped?

GB6067-2010 "Safety Regulations for Lifting Appliances" specifies the following criteria for scrapping wire ropes: 1. When the number of broken wires within one lay length reaches 10% of the total wires in the rope: For example, a 6×19=114-wire rope should be scrapped and replaced when 12 wires are broken, and a 6×37=222-wire rope should be scrapped when 22 wires are broken. For wire ropes composed of both thick and thin wires, the calculation is one thin wire counts as one, and one thick wire counts as 1.7. 2. If radial wear or corrosion exceeds 40% of the original diameter, the rope should be scrapped: If it is less than 40%, the number of broken wires can be reduced proportionally for scrapping. 3. For wire ropes used in lifting hot metals or hazardous materials, the scrapping standard is half the number of broken wires compared to general lifting wire ropes. 4. For wire ropes conforming to ISO2408 (Characteristics of wire ropes for general purposes), the number of broken wires for scrapping should follow the standards specified in GB5972—86. 5. If an entire strand breaks, the rope should be scrapped. 6. If the diameter of the wire rope decreases by 7% or more compared to the nominal diameter, the rope should be scrapped even if no broken wires are found. 7. If the core is exposed, the rope should be scrapped. 8. If the wire rope shows obvious corrosion, it should be scrapped. 9. If the outer wires locally elongate and form a birdcage shape, the rope should be scrapped.
3
2
Share

How to drive a Volvo XC60?

Method to drive a Volvo XC60: 1. First, press the vehicle's brake pedal, otherwise the vehicle cannot be started; 2. Press the vehicle's one-touch start button to start the engine; 3. Flip the vehicle's electronic parking brake lever to release the electronic parking brake; 4. Shift the gear lever to D (Drive) position; 5. Release the brake pedal, and the vehicle can then move. Features of driving a Volvo XC60: 1. Spacious interior, with electrically adjustable front seats; 2. Strong power; 3. Clear road feel and solid overall performance; 4. Good comfort; 5. The car's rearview mirrors can be heated, feature electric folding, and have memory function; 6. All areas of the center console are covered with soft-touch materials.
1
0
Share

How to Remove the Screws of a License Plate?

Steps to remove the screws of a license plate: 1. First, clean the surface of the screws, especially any rusty areas, to facilitate the subsequent removal; 2. Use a small flat-head screwdriver to pry under the screw cover, focusing on the crimped edge that acts as a fastener. Loosen one or two fasteners, insert the screwdriver into the loosened gap, and gently pry the cover off; 3. Insert a Phillips screwdriver into the hole and unscrew the inner screw, and you're done. The license plate is a legal mark registered by the statutory authority, permitting the motor vehicle to drive on the road, and it is the number that identifies the vehicle's identity, usually hung in a specific position of the motor vehicle. Blue license plates represent ordinary small vehicles, yellow represents ordinary large vehicles, and black represents vehicles used by foreign investors in China or important figures.
18
1
Share

Is 18 Too Early to Get a Driver's License?

18 is not too early to get a driver's license. Here is some relevant information about obtaining a driver's license: 1. Subjects required for the driver's license test: Subject 1, Subject 2, Subject 3, and Subject 4. 2. Materials needed for the driver's license test: medical examination form, application form, ID card, etc. 3. Precautions for the driver's license test: Subject 1 is a theoretical test, so don't take it lightly, and always check your ID card before the test; Subject 2 involves an in-car test, so make sure to adjust the seat and rearview mirror properly after getting in the car; after completing Subject 3, always shift to neutral when parking by the roadside; Subject 4 includes multiple-choice questions, so don't mistake multiple-choice questions for single-choice ones—always read the question requirements carefully.
7
2
Share

What is the reason for the warning light to illuminate after restarting a car with a dead battery?

After restarting a car with a dead battery, the warning light may illuminate due to a generator circuit malfunction. Related information: 1. Introduction: A generator (English name: Generators) is a mechanical device that converts other forms of energy into electrical energy. It is driven by a water turbine, steam turbine, diesel engine, or other power machinery, transforming the energy generated from water flow, air flow, fuel combustion, or nuclear fission into mechanical energy, which is then converted into electrical energy by the generator. Generators are widely used in industrial and agricultural production, national defense, technology, and daily life. 2. Expansion: There are many types of generators, but their working principles are all based on the laws of electromagnetic induction and electromagnetic force. Therefore, the general principle of their construction is to use appropriate magnetic and conductive materials to form magnetic and electric circuits that interact electromagnetically, generating electromagnetic power to achieve energy conversion.
2
4
Share

What are the symptoms indicating a transmission fluid change?

Symptoms indicating a transmission fluid change: 1. The replacement interval for manual transmission fluid is 40,000 kilometers or 2 years, while for automatic transmission fluid it's 60,000 kilometers or 3 years; 2. Noticeably rough gear shifting, significantly less smooth than before, and a clear increase in transmission noise after exceeding 100 kilometers - in such cases, regardless of the mileage, it's essential to promptly replace the gear oil. Transmission fluid is a lubricant that maintains the cleanliness of the gear system, ensuring proper transmission operation and extending the lifespan of the drivetrain. Early automatic transmissions didn't use specialized fluids but instead relied on engine oil. Due to vastly different working conditions and technical requirements, this practice was quickly phased out. Today's dedicated automatic transmission fluids serve multiple purposes: they act as hydraulic fluid for torque converters, lubricants for planetary gear structures, and hydraulic oil for shift mechanisms.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.