What are the license plate policies for new energy vehicles in Guangzhou?

1 Answers
MilaRose
07/29/25 12:12pm
Guangzhou's license plate policies for new energy vehicles are as follows: Local owners: As long as it is a new energy vehicle, there are no special conditions, and you can go to the vehicle management office to register the license plate normally. Non-local owners: If you are a non-local owner, you need to meet certain social insurance duration requirements to apply for a lottery or bidding for a license plate, along with other hardware requirements such as a residence permit. Relevant information about new energy vehicles is as follows: New energy vehicles: These are vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of on-board power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. Classification: New energy vehicles include four major types: hybrid electric vehicles (HEV), pure electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices).
Was this review help?
20
3
Share
More Forum Discussions

Where is the BYD F3 fuel pump fuse located?

BYD F3 fuel pump relay is located on the wiring harness assembly, not inside the fuse box. The wiring harness assembly is positioned below the steering wheel on the left side. More details are as follows: 1. Function: The fuel pump relay primarily serves to amplify signals, allowing a very small current to control a high-power circuit. It also expands the control range. When the signal reaches a certain threshold, it can switch, disconnect, or connect multiple circuits simultaneously based on different contact group configurations, achieving automatic switching. Another function is to adjust the fuel pump's activation and deactivation to ensure the engine operates normally. 2. Principle: This control circuit can alter the fuel pump's power supply line through the fuel pump relay based on changes in engine speed and load, thereby controlling the fuel pump's operating speed.
19
1
Share

What brand is the original engine oil for the Buick Excelle?

Mobil brand, specifically the Mobil 1 5W30 full synthetic engine oil. The selected engine oil must meet certification standards: The engine oil needs to comply with certification standards, as only certified engine oil can provide certain quality assurance. Different Buick models may use different engine oil types and brands, so car owners should choose the appropriate engine oil based on their vehicle model to better protect the engine and extend its service life. Regular oil changes: During daily vehicle use, it is necessary to regularly change the engine oil and oil filter. Full synthetic engine oil is typically changed every 10,000 kilometers, and the oil filter should be replaced at the same time when changing the engine oil.
14
1
Share

What is the reason for the Mercedes-Benz C200L run-flat tire system stopping operation?

If the Mercedes-Benz C200L run-flat tire system stops operating, you can check the tire pressure, as it may be due to low air pressure in one of the tires. Related information: 1. Introduction: Tire pressure, strictly speaking, refers to the air pressure inside the tire. There is a standard tire pressure indicator on the rear end of the driver's side door, which indicates the pressure when the tires are cold, i.e., after the car has been parked for at least three hours or driven no more than 1.6 km. The tire pressure is most accurate when measured with cold tires. 2. Model: C200-Kompressor (supercharged type), facing challenges head-on, the belt-driven supercharger significantly increases the vehicle's power and torque. Acceleration from 0 to 100 km/h takes only 9.4 seconds, with a top speed of up to 231 km/h.
13
4
Share

Where is the intake manifold check valve located on the Buick Excelle?

It is located beneath the intake manifold, close to the engine block, positioned below the No.3 cylinder injector. Below are the detailed specifications of the Excelle: 1. Vehicle Positioning: The Buick Excelle is a compact car under the Buick brand, with dimensions of 4609mm in length, 1798mm in width, 1464mm in height, and a wheelbase of 2640mm. 2. Powertrain: The 1.3L turbocharged engine in the Buick Excelle delivers a maximum power of 120kW and a peak torque of 230Nm. This engine reaches its maximum power at 5500 rpm and achieves peak torque between 1800 to 4400 rpm. It features a 48V mild hybrid system, multi-point fuel injection technology, and utilizes an aluminum cylinder head and block. This engine is paired with a 6-speed automatic transmission. The 1.5L turbocharged engine produces 113 horsepower and 141Nm of maximum torque, with maximum power achieved at 6000 rpm and peak torque at 4400 rpm. This engine incorporates DVVT technology and multi-point fuel injection, using an aluminum cylinder head and cast iron block. It is also mated to a 6-speed automatic transmission.
11
2
Share

What type of engine oil is suitable for Honda CR-V 2.4?

Honda CR-V 2.4 uses 5w40 engine oil. The 'w' stands for winter, and the smaller the number before it, the better the low-temperature fluidity of the oil, indicating a lower usable ambient temperature and better protection for the engine during cold starts. The number after 'w' indicates the oil's high-temperature resistance; the larger the number, the better the oil's protective performance at high temperatures. Steps for changing engine oil: Lift the car, remove the protective plate, and place a container of about 10 liters under the oil drain screw; unscrew the drain screw, blow air into the oil filler port with an air gun for two minutes, then tighten the drain screw after draining and wipe it with a tissue to check for leaks; reinstall the protective plate and lower the car, then use a funnel to add oil to the filler port. Precautions when changing car engine oil: Perform the change while the engine is warm to ensure the old oil is drained as thoroughly as possible; replace the oil filter when changing the oil. The old oil filter may be clogged with impurities, which can slow oil flow and reduce engine lubrication. Residual old oil in the filter can degrade the quality of the new oil. Add the correct amount of oil; after adding oil, start the engine and check all components for leaks. Run the engine for 3 minutes to confirm the oil level is at the normal mark.
19
4
Share

What is the Definition of Continuous Lane Changing?

Continuous lane changing refers to changing directly from one lane to the third lane, rather than following the correct procedure, which involves changing from one lane to the second lane, driving a certain distance, and then changing to the third lane. Here is relevant information: 1. Danger: On the road, seemingly insignificant lane-changing behavior can affect the normal driving of other vehicles. Therefore, it carries certain risks. For this reason, continuous double lane changes are prohibited during the driving test (Subject 3). The correct operation is to signal once, change lanes, and after successfully changing lanes, signal again and change lanes once more. 2. Penalty for Illegal Lane Changing: According to Article 38 of the "Road Traffic Safety Law of the People's Republic of China," which states "Motor vehicles violate prohibition line markings," highway traffic police will impose a 3-point penalty and a fine for solid-line lane changes at highway ramp entrances. If a traffic accident is caused, the driver will be penalized with 3 points and a fine.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.