···
Log in / Register

What are the length, width, and height of the Zotye T700?

4 Answers
DiRichard
07/29/25 7:27am
The length, width, and height of the Zotye T700 are 4748mm, 1933mm, and 1697mm respectively, with a wheelbase of 2850mm. The Zotye T700 is a new mid-size SUV model under the Zotye brand, featuring numerous fashionable design elements in its exterior. The interior is equipped with a large central control screen. It comes with two engine options: one is a 1.8-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.8-liter turbocharged engine has a maximum power output of 130 kW and a maximum torque of 245 Nm. The 2.0-liter turbocharged engine delivers a maximum power of 140 kW and a maximum torque of 250 Nm.
Was this review help?
7
2
Share
Franklin
08/13/25 12:52am
I remember driving the Zotye T700 for quite some time. The car is 4740mm long, 1933mm wide, and 1697mm tall, which converts to approximately 4.74 meters in length, 1.93 meters in width, and 1.7 meters in height. This size works quite well in the city—it's much more stable than the smaller car I drove before, with a small turning radius that makes it easy to navigate narrow alleys without scraping. The rear seats are spacious, comfortably accommodating three people, making family trips a breeze. The trunk is also sufficiently large; last week, I managed to fit two large suitcases and a bunch of backpacks without feeling cramped at all. However, the height does pose a slight risk of scraping under overpasses, so you have to be mindful of height restriction signs. Overall, the dimensions strike a good balance between comfort and maneuverability, making it practical for daily commutes and short trips.
Was this review help?
11
3
Share
Expand All
AdelineRose
10/04/25 7:08am
The dimensions of the Zotye T700 are approximately 4740mm x 1933mm x 1697mm, which is roughly 4.74m x 1.93m x 1.7m. I often drive this car with my wife and kids, and the width is sufficient—the cabin doesn't feel cramped, and the kids have plenty of room to play in the back seat. The height ensures no headroom pressure, making long drives comfortable. The length is just right for local roads, making it relatively easy to navigate residential areas and find parking spots, though I've had to maneuver carefully a few times in crowded supermarket parking lots. The trunk can fit a stroller and grocery shopping, making it very practical for daily life. This SUV's size offers great value among domestic cars, with affordable maintenance costs and hassle-free driving, making it a solid choice for budget-conscious families like mine.
Was this review help?
17
0
Share
Expand All
LeJeffrey
11/17/25 8:42am
I am the owner of a Zotye T700, with a length of approximately 4.74 meters, a width of 1.93 meters, and a height of around 1.7 meters. The size design is quite modern, featuring smooth exterior lines that often draw compliments from friends when I drive it around, especially as it doesn’t appear bulky on city streets. The width and height create a spacious interior, making it perfect for cruising with my buddies—rear legroom is generous. The low height reduces wind resistance, ensuring smooth acceleration from a standstill. However, parking requires extra caution; beginners are advised to use the auxiliary camera. Its dimensions give it an edge over similar SUVs like the Geely Boyue, offering reasonable pricing, easy maintenance, decent fuel efficiency, and a fun driving experience.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

What is the purpose of car ABS?

The purpose of car ABS is to continuously switch between the critical point of tire sliding and rolling, effectively shortening the braking distance and preventing the vehicle from skidding during emergency braking. The working principle process of car ABS is: 1. The ABS system monitors the rotation speed of the four wheels. When a wheel is about to lock, the system releases the brake of that specific wheel, allowing it to resume rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to that wheel; 3. When the wheel is about to lock again, the system releases the brake of that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes and ensure the stability and normal operation of the vehicle.
17
5
Share

What Causes the BMW 740 to Shake During Rapid Acceleration?

Reasons for the BMW 740 shaking during rapid acceleration: Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The engine's combustible mixture alternates between being too lean and too rich, leading to idle shaking after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also cause this type of problem. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel gasket and spark plugs, but still notice the car shaking at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are functioning properly. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car to shake.
19
4
Share

Does the replacement of the front windshield for Skoda Octavia require an original factory part?

Skoda Octavia front windshield replacement does not require an original factory part. Windshield: The function of the windshield is to provide a survival space for passengers. When impacted and shattered, the glass breaks into small pieces with blunt edges, minimizing harm to occupants. Currently, most car front windshields are made of laminated tempered glass or zoned tempered glass, which can withstand strong impacts. Zoned tempered glass is a new type of tempered glass that undergoes special treatment to maintain a certain level of clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Precautions for windshield replacement: Do not wash the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Avoid driving on excessively bumpy roads, sudden braking, and rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. Avoid driving on highways and keep the maximum speed below 80 km/h. Do not apply window tinting within seven days. After rear windshield replacement, do not open the windows while driving for three days to prevent displacement caused by wind pressure.
14
1
Share

How to Set the Tire Pressure for Buick Verano?

Buick Verano tire pressure setting method: Select the tire pressure mode on the dashboard, press and hold the checkmark button to enter the learning mode, then inflate and deflate the tires in sequence to complete the setting. The dimensions of the Buick Verano are: length 4723mm, width 1802mm, height 1476mm, with a wheelbase of 2700mm. The Buick Verano is equipped with a 1.3L three-cylinder turbocharged engine, delivering a maximum horsepower of 165PS, maximum torque of 240Nm, and maximum power of 121kW. The maximum power speed is 5600rpm, and the maximum torque speed ranges from 1500 to 4000rpm. It is paired with a CVT continuously variable transmission.
2
4
Share

What Causes Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power; 2. Loose connection between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc. The correct method for starting a manual transmission is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing or lifting to prevent stalling. Hold steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the right foot. Gradually release the accelerator, fully depress the clutch to shift to second gear, and repeat the process to shift to third gear, ensuring a smooth and stable vehicle startup.
19
1
Share

What engine is used in the Toyota RAV4?

The Toyota RAV4 is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power output of 126kW and a maximum torque of 209Nm. In terms of the transmission system, the 2.0L engine is paired with a CVT continuously variable transmission. The 2.5L engine delivers a maximum power of 178kW and is matched with an eCVT continuously variable transmission. The Toyota RAV4 has dimensions of 4570mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2660mm. It has a minimum ground clearance of 195mm and a curb weight of 1420kg.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.