What are the length, width, and height of the Trumpchi GS8?

1 Answers
Gertrude
07/30/25 2:04am
The length, width, and height of the Trumpchi GS8 are 4835mm, 1910mm, and 1765mm respectively, with a wheelbase of 2800mm. The vehicle dimensions and interior space are quite large, and the exterior design is very imposing. The car is equipped with a 2.0-liter turbocharged engine across the entire lineup, delivering a maximum power of 185 kW and a maximum torque of 390 Nm, paired with a 6AT transmission. The Trumpchi GS8 is a mid-size SUV, featuring a MacPherson independent front suspension and a multi-link independent rear suspension. The vehicle also offers a four-wheel-drive version, equipped with an on-demand four-wheel-drive system. This system is simple in structure, compact in size, and lightweight, enhancing the vehicle's off-road capability and escape performance.
Was this review help?
13
1
Share
More Forum Discussions

Why is there water accumulation on the co-driver's floor mat of the Roewe 550?

Water accumulation on the co-driver's floor mat may be due to a leaking heater core or a clogged air conditioning drain pipe. Below is additional information about car floor mats: 1. Car Floor Mats: Car floor mats are eco-friendly automotive interior components that integrate five main functions: water absorption, dust absorption, stain removal, noise insulation, and protection of the main carpet. As part of interior decorations, car floor mats help maintain cleanliness inside and outside the vehicle, providing aesthetic comfort and embellishment. 2. Advantages: Car floor mats absorb water, dust, and stains, effectively preventing residual moisture and dirt from shoes from causing slippage between the clutch, brake, and accelerator pedals. This avoids potential safety hazards and reduces the likelihood of interior contamination and damage. After all, cleaning floor mats is more convenient and economical than cleaning the interior. 3. Functions: Thick base materials can block noise from the chassis and tires, enhancing driving comfort. Velvet-type car floor mats can also thoroughly absorb residual noise and echoes from the car audio system, protecting hearing from damage.
5
4
Share

What are the methods for dealing with handbrake failure in the Leopaard CS9?

Methods for dealing with handbrake failure in the Leopaard CS9 are as follows: 1. Brake pedal failure: If the brake pedal is aged, causing the pedal spring to be too loose or the screws to be too loose, symptoms such as slow brake return or incomplete return will occur. Conduct a detailed inspection of the car's pedal and promptly replace any damaged parts. 2. Low brake pump pressure: Low brake pump pressure can lead to incomplete brake return. Causes of low brake pump pressure include blockage in the brake system management and air leakage in the brake booster. 3. Lack of brake fluid: Lack of brake fluid is the main cause of incomplete brake return. It is necessary to promptly check the brake fluid and replace or replenish it as needed.
15
1
Share

When braking, does the body lean forward or backward?

When braking while driving, the human body tends to lean forward due to the principle of inertia. The faster the speed, the greater the forward inertial force when braking. If the vehicle is in reverse gear, braking will cause the body to lean backward. Therefore, during vehicle operation, it is essential to avoid sudden braking as much as possible to prevent the driver, front passenger, and other occupants from experiencing collision hazards caused by inertia. When a person is seated in a moving vehicle, the contact points between the car and the body (such as the buttocks, hands, or feet) provide a forward frictional force, causing the person to move forward with the car. As a result, the person gains forward inertia. However, when the vehicle brakes, the forward force from the car disappears, while the person continues to maintain their original forward motion due to inertia, leading to a "forward lean." In traffic management, maintaining safe distances, speed limits, and wearing seat belts can help mitigate the dangers caused by inertia. Correct braking technique: During normal driving—whether following another vehicle, ascending/descending slopes, or stopping at intersections—lightly press the brake pedal to ensure smooth and gradual deceleration. In emergencies, firmly apply the brakes to achieve the shortest possible stopping distance and prevent accidents.
13
1
Share

At how many kilometers should the timing belt of the Ford Escort be replaced?

The timing belt of the Ford Escort should be replaced every 8 years. The timing belt is a crucial component of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and maintaining a specific transmission ratio. Here is more information about the Ford Escort: 1. The Ford Escort is a mid-size sedan featuring a vertical inverted trapezoidal grille design at the front and equipped with a six-airbag protection system in the interior. 2. The dimensions of this vehicle are 4587mm in length, 1825mm in width, and 1490mm in height, with a wheelbase of 2687mm. It has a MacPherson strut front suspension and a torsion beam rear suspension, delivering a maximum horsepower of 122ps and a maximum torque of 153nm.
18
4
Share

Will engine oil normally decrease?

Under normal circumstances, engine oil will decrease. Engine lubrication primarily involves pressure lubrication and splash lubrication. During operation, factors such as pressure changes, high temperatures, and heat dissipation can cause oil volatilization and additive depletion, leading to a gradual reduction in oil volume, though the amount is minimal. Below are specific methods for selecting engine oil for vehicles: 1. Performance selection: If you prioritize long-lasting oil performance, Mobil oil is a good choice; if you focus on engine cleanliness, Shell lubricants can be used; for lubricants with strong oil film toughness, Castrol is recommended. 2. Driving conditions: For frequent driving in congested areas, older vehicles, or long-distance heavy-load transportation, the viscosity of the lubricant can be appropriately increased. 3. Engine type: For naturally aspirated engines, mineral oil and semi-synthetic oil can be used. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate under harsher conditions, requiring higher-grade lubricants with better fluidity, preferably full synthetic oil.
1
3
Share

Can a Level 3 Flood-Damaged Car Be Repaired and Driven on Highways?

A Level 3 flood-damaged car cannot be repaired and driven on highways. If a car has suffered Level 3 flood damage, it is considered severely water-damaged. Generally, it is not recommended to repair such vehicles, as they not only incur high repair costs but also pose significant safety risks even after repairs. These vehicles should be scrapped directly. Below is an introduction to flood damage levels: 1. Level 1 flood damage: At this level, the car has only suffered minor water damage, with minimal harm to the engine, electrical circuits, and other equipment. In most cases, the car can be repaired without major issues. 2. Level 2 flood damage: The condition of the car is more complex at this stage. A thorough inspection of various components and wiring is required. Repairs may involve replacing many parts, being labor-intensive, having a higher likelihood of future failures, and incurring substantial repair costs. 3. Level 3 flood damage: At this level, the car is considered severely water-damaged. Repair is generally not advised due to the high costs and significant safety risks involved. Such vehicles should be scrapped directly.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.